T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
Item # 118552
Retail:$99.60
Our Price: $73.26
You Save: 26%
Confirmed to Fit
2008 Chrysler Town and Country
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (454)
- Q & A (0)
- Photos
2008 Chrysler Town and Country - T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- 4 Flat
- Trailer Hitch Wiring
- Tekonsha
- Powered Converter
Quickly and easily install a 4-way trailer connector on your Chrysler Town and Country with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
- Connects quickly and easily
- Locate connection points behind tail lights
- Plug in T-connector
- Run hot lead to car battery
- Includes ModuLite power module that connects directly to battery to avoid overloading vehicle's electrical system
- Constructed of 16-gauge bonded wire
- Comes with dust cap for 4-way flat connector
Specs:
- Maximum amperage:
- Stop/turn lights: 4.2 amps per circuit
- Tail lights: 7.5 amps per circuit
- 1-Year limited warranty
Installation
This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove the tail light assemblies to access this harness.
Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery and insert the provided fuse.
Once installation is complete, the 4-way flat connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
ModuLite Power Module
A ModuLite power module is built into this T-One connector. With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system. Because the module draws power directly from your car's battery and bypasses the electrical routes that are used by a basic wiring harness, there is virtually no draw on your tail light circuits.
118552 Tow Ready T-1 T-Connector - 4 Wire - Modu-Lite
Installation Details
California residents: click here
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Wrong item was ordered
- Did not arrive in time
- Product did not meet expectations
Customer Reviews
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118552
Average Customer Rating: 4.8 out of 5 stars (454 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.by: Donald 12/14/2022
Installation was quite simple. Saved many $$$ doing it myself.
by: Brian01/06/2020
2009 Jeep Patriot
Great product, the connectors make it easy to set up your trailer lighting configuration. The video is helpful as well. I will say this, though - avoid the part about running the wire all the way to your battery if at all possible. This is totally unnecessary (and a lot more work) if you have a lead wire available inside the rear of your left taillight like I discovered through other sources of information in my install process. Just connected the black wire provided (without the extension cord) to this lead wire behind the taillight and I was good to go. Saved me a lot of hassle trying to string a wire throughout my entire vehicle and into the area under the hood.
by: Travis 05/21/2024
2016 Jeep Patriot
Fast shipping. The youtube videos are also a huge help.
by: Curtis W. 05/10/2019
Easily installed. Actually my wife and her friend installed the hitch and wiring. I installed the adapter wiring and attached to the hitch. Seems like a great product.
by: Michael Oberg02/23/2012
Dodge Dakota
Wow, starting with my order on Tuesday I had excellent customer service, then a short 2 days (really?) later I recieved my Rola cargo carrier and light kit. Your videos make it easy to assemble and install. Prices are cheaper than anywhere on the net. Attached are some pics but it is snowing buckets in South Dakota right now, glad when we get to sunny Orlando, thanks etrailer!!!
by: Aaron11/11/2023
2009 Dodge Grand Caravan
Waited almost a month..harness is good
by: George W.04/27/2013
Just got done installing my hitch and wiring very easy looks great I sent along a picture to show how nice it looks!
Thanks etrailer
by: Kyle03/20/2018
2014 Jeep Patriot
Just finished the install of this unit on my 2014 patriot and it couldn’t have been easier. I’ve used other models in the past on another patriot that involved wire splices and poor instructions and installation took forever. Not the case this time. The installation video specific to my vehicle provided on etrailer’s website was dead on and incredibly helpful. Overall great experience both with the product and company.
by: Michael 05/03/2023
Jeep Cherokee
Around a year ago my grandson and I installed this wiring harness on his Jeep Cherokee. It was pretty easy to install, and is still working great. I would recommend this product.
by: Jerome 08/09/2023
We got the trailer hitch on time
by: Frank08/22/2020
2008 Dodge Grand Caravan
This product is amazing! I have a 2008 Dodge Grand Caravan. Install was a breeze, and the installation videos are tremendously helpful. I’m looking forward to seeing what else I can get.
by: Hector05/22/2018
2013 Dodge Durango
Received the product in perfect shape, very easy installation with the video. I'm very satisfied with this product and definitely recommend it to anybody.
by: James 06/18/2023
2010 Dodge Grand Caravan
Exactly what I needed. The longest part of the install was running the wire to the battery. I ran it with the brake lines and zip tied it to them with the supplied zip ties.
by: Richard 11/30/2023
You folks are a great company keep up the great work!
by: James09/16/2022
There probably isn't anything wrong with the harness, but couldn't install it because it wasn't the right model.
etrailer recommended this harness for me 2012 Town & Country, but when I got around to installing it, I found that it was for a 2010 model and wouldn't work on my 2012 model. I was passed the 60 days to return, they refused to let me exchange it for the proper one. I felt that since it was the harness they recommended that they should make it right, but etrailer chose not to do the right thing. So I sit with a harness that is useless to me. I wouldn't buy anything from etrailer ever again....I don't trust them anymore!!
Brooke M.
9/30/2022
Thank you for bringing this to our attention. I have sent your information to our customer service team and they will be in touch with you about this.
by: Timmy 06/12/2023
2016 Jeep Patriot
Awesome wireing kit ,easy to install
by: Nicholas05/06/2020
Easy instillation videos from etrailer were a great help I recommend etrailer for anything trailer related
by: Joe05/23/2016
2016 Dodge Grand Caravan
I installed this on a 2010 Dodge Grand Caravan SXT. Product was easy to install. I followed the directions that came with the kit and watched the install video. I ran the power wire to the battery under the van along the brake line and used zip ties to hold it in place. I traded the van in since then, but it worked up until the day I traded it in. We bought a 2016 this past February and I order the same kit (updated for 2016 as it is not the same as the old kit. Different connectors to the tail lights.), but this time routed the battery wire inside the van through the space for the jack and ran it under the carpet and out of the firewall through the same place the cable for the brake pedal comes in. way easier than crawling under the van.
Joe
5/23/2017
One year later and it still works like a champ. Next time I need a harness I will be buying my 3rd one from etrailer.
by: Brian08/22/2017
2010 Dodge Grand Caravan
Very pleased with this product! Received it in just a few days, good directions and easy to install. I could have installed it in about an hour and a half but it took me three hours. That's because I ran the green wire to the right side of the car on the inside of the car on the inside of the car under the carpet and trim and the the same with the power wire to the battery and out through the firewall rather than under the car as suggested for better protection, so it took longer.i did run the trailer plug under the car as suggested but I put it in wire loom to protect the wire from chafing and the elements. It took longer to install that way but should provide many years of service especially here in New England with all the salt and snow that deteriate wires in a short amount of time. Thank you E-Trailer!!
Brian L.
8/22/2018
This product is still working great for me, have had absolutely no problems, I believe largely due to the fact that I took the extra time to install the wires on the inside of the car as well as using wire loom to help protect it from the elements. Would do it again in a heartbeat! Thank you etrailer from a satisfied customer!
by: Zeb06/07/2019
I remember what was involved in this job before these harnesses. This is a wonderful solution. Very easy to follow instructions make for an easy professional installation. A little patience when running the power wire goes a long way. The factory connections ensure reliable, maintenance free operation. I like the loop on the flat 4 connector that secures to the safety chain loop to secure the connector when not in/not in use. The only shortfall is that there aren't enough zip ties included to properly secure the power wire when routing it to the battery. I would recommend this product if you want a one-and-done trailer lighting solution.
Zeb
6/8/2020
After using these harnesses on two vehicles for over a year on one, and two years on the other, both in a northern climate Ive experienced no issues what-so-ever. Im very satisfied.
by: Tom04/17/2020
Simple, quick and straight forward installation.
by: Ronald03/16/2018
The harness I bought was incredibly easy to install. I’m not using it until 3/28 (today is 3/16) so I can’t speak to how it works yet. I may stop by the rental trailer place just to check it out. There were two small issues. The directions called for a wire to be ran from the battery to a red wire on the black box. It’s a black wire on the box. There is no red wire. The other issue was the zip ties could’ve been 3” longer. I had to use 2 together because the only thing to tie to was my hitch. I called etrailer about the wire issue and the lady was very friendly and helpful. I’d definitely buy it again.
Ronald
3/16/2019
Perfect
by: Brian C.06/13/2016
2010 Dodge Grand Caravan
The install of this wiring harness was very easy. It came with all necessary parts, well except terminal crimpers and wire strippers, but I had those already. I ended up running the power wire from the battery along the brake lines to the rear of the van.
I was a little surprised that the wiring module is mounted on the exterior underneath the vehicle, but given Chrysler's design, I don't really see a better option. So far it has given me no problems. It's nice to have a second tow vehicle.
Brian C.
6/27/2017
The harness still works great, no issues so far.
by: Dan A06/19/2019
lights are still working well, i remember the directions being a little fuzzy on which side is which and i ended up putting them on wrong sides, BUT i cut the end off and wired it into a six round with a four/five flat plug, so all i had to do was reverse when i spliced and it turned out fine! Less satisfied with the mounting bracket provided with my six round four/five flat plug, cheap and easily bent. Also the four flat corroded nice and fast with the salt up here in northern WI (even with the cover) as well as the springs for the cover for the six round.
Dan A.
6/20/2020
with application of wd 40 the corrosion has been held in check and the lights are all still working, the mounting bracket has held up, too
by: Gary 12/20/2020
2015 Jeep Patriot
My order was received promptly and complete, as always from etrailer!
Your installation videos are always helpful and accurate.
The one suggestion I have concerning this product is that the battery lead coming out of controller should be longer. The controller is generally installed before the lead is crimped to the battery connection. Once the controller is installed, it is challenging to reach the lead to attach the battery power wire because of very limited working space. Just a thought.
Installed as instructed and tests as desired.
Gary
12/21/2021
Installed easily, as outlined in your excellent video.
25
454
Show More Reviews
See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring
- Trunk and Hitch Mounted Bike Rack Options for a 2011 Dodge CaliberThe Thule OutWay 3 Bike Rack, # TH56BV, will fit on your 2011 Dodge Caliber as long as it is not the SRT4 model with the rear spoiler. The clips will attach to the top and bottom of the rear hatch and a spoiler cannot support the weight of a trunk mounted bike carrier. If you have a rear spoiler, then I would recommend a hitch like our Draw-TiteTrailer Hitch, # 24769, and one of our most popular hitch mounted bike racks the Thule Camber 2 Bike Rack, # TH9058. You may also want to get...
view full answer... - Tail Light Wiring Harness Recommendation for a 2010 Dodge Grand CaravanThe recommended trailer wiring harness for your 2010 Dodge Grand Caravan is the T-One Vehicle Harness # 118552. To order this you would just need to go to the product page, select the quantity you need (most likely 1) and then hit the add to cart button. I attached installation instructions and an installation video for this product for you to check out also. You might also be interested in purchasing a Mounting Bracket # 18144 for storing the 4-way of the # 118552.
view full answer... - 2015 Jeep Patriot Trailer Hitch and Wiring RecommendationFor trailer wiring for your 2015 Jeep Patriot we have custom fit options that will basically plug inline with the taillights of your vehicle. For that the Curt harness part # 118552 has been confirmed as a fit. I attached an install video that shows how it will install. For a hitch the Curt part # C13081 has been confirmed as a fit and would be a great option that we would recommend for you. I attached an install video for this for you to check out as well. Since you wanted to do some...
view full answer... - Right Trailer Turn Signal Stays On Using Curt T-Connector On 2008 Chrysler Town and CountryI concur, it does indeed sound like you have a faulty control module. That said, the control modules are not replaceable by themselves so you will need to obtain an entire new trailer wiring harness unfortunately as you are out of the warranty period as well. For replacement, I would actually go with the T-One Vehicle Wiring Harness part # 118552 as we tend to find that this brand makes the most reliable wiring products therefore the control module will last longer. The good news is that...
view full answer... - How to Reinstall Tow Hook on a 2012 Jeep Patriot when Installing a Trailer HitchYou can reinstall the tow hook if present when installing trailer hitch # 75712 on a 2012 Jeep Patriot. You will have to drive out the knurled neck bolts on the tow hook. Then you will need to drill out the holes to 5/8 of an inch. Use the hardware that comes with the hitch to attach the tow hook to the outside of the driver side frame. I have included a link to the installation instructions that explain this process. I have also linked a video that shows the rest of a typical installation. If...
view full answer... - Troubleshooting Trailer Wiring of Cornpro Trailer Where Taillight Stays on All the TimeThe converter you'd need to test of your trailer wiring would not be on your Cornpro trailer and would be on your tow vehicle instead. Depending on your tow vehicle the converter might be easy to find (if it's aftermarket) but if it's factory trailer wiring that might not be totally possible. First thing you should do at this point is test the 4-way of the wiring harness with a circuit tester part # PTW2993 for voltage on all of the right pins when the taillight signals are being applied....
view full answer... - How Far is a Trailer Hitch Recessed Under the Bumper on a 2014 Jeep PatriotWe haven't had a chance to install Draw-Tite trailer hitch # 75712 on a 2014 Jeep Patriot but the measurement should be around 6-1/2 inches like on the 2011 model in the video I have linked to the right. We have installed Curt hitch # C13081 on a 2014 Patriot and it measured 6-1/2 inches from the center of the hitch pin hole back to clear the rear bumper. I have linked the video for this hitch as well. If you plan on doing some towing you might be interested in etrailer ball mount kit...
view full answer... - Can Trailer Harness Wiring Be Tested Without Cutting WiresYou can use a circuit tester like part # PTW2993 to test the input and output wires on the Tekonsha Trailer Wiring Harness # 118552. The tester will pierce the insulation of wires you want to check. If you have access to the connectors where the converter plugs into the vehicle harness, you can back probe the connector without having to pierce the wire insulation. I have attached a link to a video that shows how the tester is used to check the wiring.
view full answer... - Trailer Taillight Wiring Harness Recommended for 2011 Jeep Patriot LatitudeFor your 2011 Jeep Patriot Latitude, I'd recommend the Tekonsha taillight wiring harness/powered taillight converter, part # 118552 which would install as shown in the video I've linked for you. The Curt # C56333 you'd looked at would also work, but we've found that over time, the Tekonsha harnesses have proven to be a bit more reliable.
view full answer... - Trailer Wiring Harness Recommendation for a 2013 Dodge Durango with Factory Trailer HitchSince your 2013 Dodge Durango came with the factory trailer hitch it is likely pre-wired for a trailer connector as well. Check behind the rear bumper, driver's side. There should be a round connector in that general area (it may have a cap on it). If you have that you can plug in a wiring harness such as # C55774 which is both a 7-Way and a 4-Way. If that connector is not there then you can use # 118552 to add a 4-Way flat connector to the rear of the vehicle. I have included links to...
view full answer... - Is Fascia Trimming Required to Install a Trailer Hitch on a 2013 Jeep PatriotRear fascia trimming is required according to the instructions, see link, for trailer hitch # 75712 for the 2013 Jeep Patriot. Not trimming the required area and flexing the fascia could result in deforming the fascia. I have not heard of anyone trying this so I cannot say if it would work or not. All of the hitches available for your vehicle do require fascia trimming for installation. If you decide to go ahead with the hitch and need to complete your towing set up you can use the following...
view full answer... - Hitch, Trailer Wiring and Brake Controller for Towing Pop-Up Camper w/ 2008 Chrysler Town & CountryWe've got exactly what you're needing to get on down the road with your pop-up. As a first step, please confirm with your owner's manual that your Town and Country has sufficient towing capacity to safely tow your pop-up. For a hitch, I'd recommend the Draw-Tite Class III receiver, part # 75579. The Draw-Tite model won't require that the underside of the bumper fascia be trimmed, or that a stabilizing strap be used for non-trailer loads like bike racks or cargo trays in order to retain...
view full answer... - Hitch Recommendation for a 2010 Chrysler Town and CountryThere was a generation change between your 2006 Chrysler Town and Country to your 2010 model so the hitch from your 2006 would not fit your 2010 model. Instead I would recommend the 2 inch hitch part # 75579. 2 inch hitches will have more capacity and more hitch accessories like bike racks and cargo carriers are designed to fit them as well. I attached an install video for you to check out as well. For trailer wiring you would want the part # 118552. For ball mounts I recommend the...
view full answer... - Trailer Hitch and Wiring for 2008 Chrysler Town and Country Carrying Wheelchair CarrierThe best hitch for your 2008 Chrysler Town and Country for carrying a wheelchair carrier like you mentioned would be the etrailer # e98854 which has the best tongue weight capacity and has a mostly hidden appearance which looks the best and also helps with ground clearance. In the description it says max GTW with weight distribution is 5,000 lbs which is a system that distributes some tongue weight up to the front axle which increases the weight capacity. For a custom trailer wiring harness...
view full answer... - Trailer Hitch Recommendation for a 2012 Jeep Patriot Latitude EditionThe Draw-Tite trailer hitch, # 75712, fits all styles of the 2012 Jeep Patriot including Latitude models. I have included a link to the installation instructions and a link to a video that shows a typical installation for you. If you plan on doing some towing I recommend the etrailer ball mount kit # EBMK4. It comes with a ball mount, an interchangeable ball set, a hitch pin with clip, and a carrying bag. For trailer wiring, use # 118552. I have included some links explaining the installation...
view full answer... - Installing T-1 Harness # 118552 and Brake Controller on 2011 Dodge Durango using # ETBC7 Install KitWe have exactly what you need to equip your Durango to tow a trailer equipped with electric brakes. The T-1 wiring harness you recommended, # 118552 would be installed first. The harness plugs inline with the vehicle tail light wiring harness behind each tail light, with a separate power wire that is ran to the positive battery terminal, as you described. With this particular harness, the power needed for the trailer lights comes directly from the battery, rather than being drawn from the...
view full answer... - Availability of a Trailer Hitch that Will Fit a 2011 Dodge Durango with an 18 Inch Spare TireI spoke with my contact at Draw-Tite and Hidden Hitch. He stated that the Hidden Hitch # 87608 (no longer available), and the Draw-Tite, # 75713 will both fit with the full size spare (18 inch spare. If you look at the instructions that I have linked for you, you will see that the hitch fits around the spare tire well under the vehicle. If you plan on doing some towing, I recommend the etrailer ball mount kit, # 989900, which comes with 2 ball mounts, 2 balls, a hitch pin and clip, and...
view full answer... - Choosing a Hitch for 2010 Dodge Grand Caravan with Stow-N-Go SeatsYour 2010 Dodge Grand Caravan with Stow-N-Go Seats can be fitted with either a light-duty 1-1/4-inch Class II hitch or a heavier duty 2-inch Class III type. We offer options in both sizes and all will fit your version of the Grand Caravan with Stow-N-Go seats. The link will let you see all options. I suggest a heavier-duty Class III type hitch because it will give you a greater safety margin and also be more widely compatible with a whole range of accessories like bike racks and cargo...
view full answer... - Distance From Center of Hitch Pin Hole to Bumper on 2010 Chrysler Town and CountryThe distance from the center of the hitch pin hole of etrailer.com Trailer Hitch Receiver # E98854 to the edge of the rear fascia (or the edge of the rear bumper) on your '10 Town and Country is approximately 4 inches. For wiring which will give you a 4-way connector and allow you to power your trailer's lights you need Wiring Harness # 118552. I also recommend checking out Ball Mount Kit # 989900, which is for 2” hitches and may fulfill your towing needs in one tidy package; two ball...
view full answer... - Troubleshooting Trailer Wiring Harness on a 2011 Jeep Patriot where Parking Lights Stay OnIt sounds like the converter box of the T-One Vehicle Wiring Harness # 118552 that you referenced got shorted out. What you are describing sounds like what happens when a trailer wiring short takes out a converter box. You can use a circuit tester like part # PTW2993 to check for voltage coming in and out of the box to isolate the problem if you like. You will want to test for voltage on the input side of the converter box with the correct tail light circuits activated and then also check...
view full answer... - Draw-Tite 75713 or etrailer e98901 Trailer Hitch for 2013 Dodge Durango Out of the Draw-Tite # 75713 and etrailer # e98901 trailer hitches that fit your 2013 Dodge Durango I recommend going with the etrailer option because it has a matte black finish as opposed to the glossy black finish on the Draw-Tite. This not only tends to withstand scratches from road debris better, but it typically matches the trim on vehicles better as well which means you'll be getting a durable hitch that looks great. Attached is an installation video of this hitch on a 2021 Durango...
view full answer... - How to Install Prodigy P2 Brake Controller # 90885 in 2013 Dodge Durango Without Under-Dash PortIf your 2013 Dodge Durango lacks a 7-way trailer connector and the under-dash connection port for a brake controller (which would allow you to use the quick-connect harness # 3045-P) you can still do a hard-wired installation. To do this you can use our # ETBC7, which is a complete brake controller installation kit that includes a 7-way connector, wiring, circuit breakers, connectors and circuit tester. If your Durango does not have a 4-pole trailer connector already you will also need...
view full answer...
- Trailer Wiring Harness for a 2011 or 2012 Dodge JourneyThe 2011 and 2012 Dodge Journey requires a powered converter. The T-1 connector # 118552 will fit. I have included a link to the installation details and a video showing a typical installation for you. The powered converter receives the signals from the tail light wiring but powers the trailer lights using the vehicle battery to protect the vehicles electrical system.
view full answer... - Which Trailer Wiring Harness for 2011 Dodge DurangoIf all you will ever tow with your Durango is a small flat-bed or utility trailer with bare-bones lighting with one stop/turn/running light per side, for example, the standard # C56133 would work for you. If your trailer has additional side marker or clearance lights, or you might have the need to tow a larger trailer with more elaborate lights in the future, you would be better off going with the powered converter, # C56333. Regardless of what you might or might not be towing in the...
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Randy B
Test Fit:
Joe B
Test Fit:
Brent H
Test Fit:
Robert C
Test Fit:
David F
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Andrew K
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Sue W
Video Edited:
Chris R
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Isabelle B
Installed by:
Cole B
Video by:
Alan C
Video by:
Zach D
Video by:
Jonathan Y
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Donald
12/14/2023
Works great. The installation was easy, the instructions were excellent and easy to follow.