Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector

See what our Experts say about this CURT Custom Fit Vehicle Wiring

• Comparing etrailer and Curt Trailer Hitch for 2023 Dodge Durango
  The Curt # C13182 and etrailer # e98901 are the same hitch with the exception of the finish. Both of these will fit your 2023 Dodge Durango. The Curt has a glossy finish while the etrailer hitch has a matte black finish. I prefer the matte black since it does a better job hiding inevitable dirt and scratches. If the finish isn't a concern then I would choose whichever has a lower price. If you plan to use the hitch for towing you will also need wiring. Assuming you do not have the factory...
  view full answer...
• How to Access Lighting Signals in Silverado 4-Pole Wiring
  If your Silverado already has 4-pole trailer wring in place you can use a T-connector harness like # 118384 or # C55384 to give you access to the stop/turn/running light signals you need for your new tail lights. As long as your existing wiring uses a round U.S. Car type connector the above part will simply plug in inline with that wiring and give you the same signals. You can refer to the linked article for more on wiring. In 4-pole wiring the white wire is ground, the brown wire is...
  view full answer...
• Will Curt T-Connector Wiring Harness for Factory Tow Package C55384 Fit 2015 Ram 1500 Factory Wiring
  Yes, the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector # C55384 will plug in line with the factory 7-Way trailer connector on a 2015 Ram 1500. I have linked a video showing an example installation on a different truck.
  view full answer...
• Hidden Hitch & Trailer Wiring For 2019 Jeep Grand Cherokee
  We can get your 2019 Jeep Grand Cherokee set up with the Hidden Hitch and 4-way trailer wiring. Just keep in mind the correct 4-way will depend on if your Grand Cherokee has the factory tow package or not; I'll go ahead and list out what you need below: - Hidden Hitch by Draw-Tite Trailer Hitch Receiver # DT26GR - WITHOUT Factory Tow Package: Curt T-Connector Vehicle Wiring Harness # C62VR OR - WITH Factory Tow Package: Curt T-Connector Vehicle Wiring Harness for Factory Tow Package # C55384
  view full answer...
• 2006 Ford Explorer 7-Way Has More Wires Than the Curt T-Connector Harness 55384
  That is because the Curt T-Connector Harness # C55384 that you referenced is designed to add a 4-Way connector to a vehicle that already has a fully-functioning 7-Way connector. The red and blue wire that you are seeing will most likely send signals to your trailer to activate the trailer's brakes (should you be using a brake controller) and reverse lights or 12V power. You can verify this by using a Circuit Tester # PTW2992 to test the functions on your 7-Way. I have attached an article...
  view full answer...
• Hitch and Wiring Recommendation for a 2007 Nissan Titan
  First let's start with a hitch for your 2007 Nissan Titan. For that you would want the Curt Hitch part # 13199. This has been confirmed to fit your truck and is our most popular option. I attached an install video for you to check out as well. For trailer wiring the # N40975 would cover both a 7-way and a 4-way so you would not also need the # C55384. I attached an install video for the trailer wiring for you to check out as well. If you wanted to do some towing you might be interested...
  view full answer...
• Does Curt 4-Way Adapter C55384 Fit 2022 Nissan Frontier
  Hey Jerry, yes the Curt 4-way adapter part # C55384 that you referenced does fit your 2022 Nissan Frontier.
  view full answer...
• Trailer Wiring Harness Recommendation for 2020 Ford Explorer Without Tow Package
  The T-One Vehicle Wiring Harness part # 118599 is a fit for a 2020 Ford Explorer without the factory tow package. If you did have the factory tow package you would then use the Curt T-Connector Vehicle Wiring Harness part # C55384. The T-One plugs in behind the tail lights so it bypasses the factory tow package wiring whereas the T-Connector plugs into the factory tow package port. If you don't already have a trailer hitch, I recommend the Curt Trailer Hitch Receiver part # CU78FR which...
  view full answer...
• Recommendation For Wiring Harness For 2015 Jeep Grand Cherokee To Tow Uhaul Motorcycle Trailer
  I checked with Uhaul and you will need a 4-Way flat connector to tow the motorcycle trailer with your 2015 Jeep Grand Cherokee. If you have the factory tow package then you will need the Curt T-Connector For Factory Tow Package, Item # C55384, that will simply plug into the OEM harness. If you do not have the factory tow package, you will need the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Connector, Item # 118727, which plugs directly into existing wiring behind the tail lights...
  view full answer...
• Troubleshooting Trailer Wiring With 2002 GMC Sierra 1500HD
  There are taillight converters available and it is possible I can find something to work for you though I would need to know the year of your GMC Sierra 1500 in order to find out. If you can get back to me with that information I can try and find a solution for you.
  view full answer...
• Recommended Hidden Wiring for Tailgate Light Bar on 2018 Ford F-250 Super Duty
  The Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector # C55384 will work perfectly with a light bar but it will give the trailer connected on the dash and the other trailer associated changes that your truck recognizes. The only way around that is to splice the tailgate light bar pigtail into the factory wiring so the sensors don't get triggered for the trailer compatible electronics. For your tailgate light bar on your 2018 Ford F-250, I...
  view full answer...
• Availability of 4-Way that Plugs In Line with 7-Way at Rear of Truck
  We have just what you need. The part # C55384 is a 4-way that plugs inline with a 7-way connector and gives you a 4-way that you can then use to power the light you mentioned.
  view full answer...
• 4-Way Recommendation for a 2013 GMC Sierra to Power Light Bar
  We have exactly what you need. The Curt Wiring Harness part # C55384 will plug inline with the 7-way/4-way you have at the rear of your vehicle and will give you an additional 4-way that you could use for a third brake light bar. We also carry third brake light light-bars that install under the tailgate, if you check out the link I attached you will see all that we carry that are confirmed to fit your 2013 GMC Sierra.
  view full answer...
• How to Add Secondary 4-Pole Wiring Harness to 2012 Ram 1500 to Power Lighted Hitch Cover
  You can use the Curt T-Connector 4-Pole wiring harness # C55384 plugged in at the back of your existing factory connector to provide a 4-pole plug for your lighted hitch cover. This harness connects inline between the existing connector and the factory wiring. The factory connector at the bumper remains active.
  view full answer...
  
• 4-Way Trailer Connector for 2021 Ford F-250
  For your 2022 Ford F-250 the Curt 4-way kit part # C55384 will plug inline with your 7-way and give you a 4-way connector like you are wanting.
  view full answer...
• 4-Way Recommendation for a 2010 Dodge Ram with 7-Way to Power LED Lightbar
  The 7-way of your 2010 Dodge Ram will separate easily to allow you to install the Curt T-Connector part # C55384 easily. Also, the current 7-way and 4-way you have on your truck will still be fully functional with this adapter installed. This would be the perfect solution for what you are looking to accomplish.
  view full answer...
• Towing Capacity of 2004 Chevy Silverado and Recommended Hitch for Towing Enclosed Trailer
  In order to find the correct towing capacity for your 2004 Chevy Silverado, you're going to want to consult with the owner's manual; from what I was able to find, you'll be able to tow between 7500 and 9100-lbs depending on the exact model and specs on your truck. If the Silverado is four-wheel drive and has a 3.73:1 axle ratio, the capacity is 7,800 lbs (extended cab) or 8,200 lbs (regular cab); if it is four-wheel drive and has a 4.10:1 axle ratio the towing capacity is 8,800 lbs (extended...
  view full answer...
• Recommended Trailer Hitch and Wiring for 2020 Jeep Grand Cherokee
  To give yourself a complete tow package for your 2020 Jeep Grand Cherokee Altitude you will need a hitch, wiring and a ball mount. I would recommend the Draw-Tite # 75699 as your hitch receiver since it has a more concealed design and the tube won't hang out from under the vehicle like it does on the Curt # C13182. For your wiring, if you don't have the tow package wiring on your vehicle, you'll want to use the Tekonsha T-One # 118727 in order to put a 4 pole flat connector on the back...
  view full answer...
• Trailer Hitch and Wiring for a 2017 Dodge Durango
  For your 2017 Dodge Durango you can use Curt trailer hitch # C13182. This is a Class III hitch with a 2 inch receiver that fits all models of the 2017 Durango (R/T models with dual exhuast will require trimming of the heat shield and fascia, and full-size spare will not be able to be stored under the vehicle). I have included a link to a video showing an example installation for you. I also recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise...
  view full answer...
• 4-Way Adapter Recommendation for 2017 Ford F-350 with 7-Way at Rear
  Yes, the Curt 4-way adapter will plug inline with the 7-way you have at the rear of your 2017 Ford F-350 and will give you a 4-way to use for your LED tailgate light. If you already have a similar adapter wired to your 7-way this will still work well with it.
  view full answer...
• Availability of Separate 4-Way from 7-Way for 2014 GMC Sierra 1500
  The Hopkins 7 and 4-Way Kit part # HM40975 which is a confirmed fit for your 2014 GMC Sierra 1500 has the 4-way and 7-way connected in a way that would not allow you to separate them. If you wanted to wire in a separate 4-way you could use the part # C55384 inline with this connector and you'd have a separate one.
  view full answer...
• 4-Way Recommendation for 2013 Ford F-150 with 7-Way For Powering Tailgate Lightbar
  Since your 2013 Ford F-150 would have a factory 7-way at the rear of it all you would need to install a secondary 4-way so that you could power the LED lightbar is the part # C55384. This will plug inline with the 7-way to provide you with a 4-way.
  view full answer...
• 2015 Jeep Grand Cherokee Trailer Wiring Troubleshooting, 7-Way Not Active
  Your 2015 Jeep Grand Cherokee may have the connector needed but it's not active. First, I would use a circuit tester such as # PTW2993 to test the 7-way connector to see if it's active. You may need to contact a Jeep dealer to have them activate the trailer wiring as it sounds like yours isn't. This is a fairly common issue that we have seen.
  view full answer...
• How to Use Ford 7-Way # 118243 and Have a 4-Way Harness
  I have a solution for you, but they don't sell just the harness of the # 118243 or a version that also includes a 4-way. Instead you would want to go with the # 118243 and then use the part # 74682 instead of the included 7-way. Or go with the # 118243 and then also install the # C55384 to install inline with the 7-way.
  view full answer...

Do you have a question about this Custom Fit Vehicle Wiring?