To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring - no cutting, splicing or tapping required.
Features:
Installation
This custom-fit T-connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side interior trim panels in your rear cargo area.
Once installation is complete, the 4-way connector will be stowed in an out-of-the-way location within your cargo area.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
California residents: click here
Average Customer Rating: 4.6 out of 5 stars (40 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring - no cutting, splicing or tapping required.Product received.
Product installed.
Installation easy.
Ground wire was not as I expected.
Ground wire was looped , connected to itself and sealed with a protective
rubber heat shrink.
There was no instructions related to this connection.
This ground wire pig-tail should be explained.
Works great! Meets/exceeds expectations. I really like how the receiver end comes with a cap to keep dirt and water from getting in and the long cord allows for convenient connection even with long tongue trailers. When not in use I tuck it into the trunk and truck lid closes fine without damaging cord, I have bought from them before I will definitely buy from them again, as a matter of fact I just purchased another similar connector for my Mazda truck. Thanks etrailer!
Everything went great except for one thing....connectors are wrong ..no plug and play.
Rachael H.
7/5/2018
I have confirmed with my contacts at Curt and this wiring harness is confirmed as a fit for your Grand Marquis. The connectors from this wiring harness are located in the rear of the trunk behind the taillights. You may need to remove some of the interior lining of the trunk to be able to get to the connectors. There is a helpful image on page 2 of the instructions provided by Curt.
Helpful Links
nobody get a perfect score, always something to improve on. I am very HAPPY with each purchase from etrailer. Each new vehicle or past 10 yrs have had e-trailer hitches & wiring. Everything worked perfectly, delivery was on time as usual. Thank you again for an easy install on the Mustang.
C55326
I investigated this product.
I took a gamble and ordered it, unfortunately the plug ins were different. So I went ahead and and cut the plugs off and hard wired into the vehicle harness. Not a big deal, was just hoping for a plug and play.
Received it the second day after I ordered it. Went on my 1996 Grand Marquis this morning. Every thing went well--tried to duplicate your helpful video. Did the installation myself with the car's rear end up about 2'. Used 2 milk crates on either side of hitch center so I could get hitch in place to mark my bolt holes on the frame. Expect it to work well for pulling a 4'x8' bed trailer
I ordered a trailer wiring harness from etrailer. It took me all of ten minutes to install it. The easiest installation ever!
when this wire harness came in I installed it within 30 mins very easy to do the directions that come with it were very clear easy to follow highly recommend this item
Received product ahead of scheduled delivery date. Took only a few minutes to install and worked perfectly when plugged into my trailer.
Quick contact and shipment of wiring harness. Took about 5 minutes to install.
Good quality materials used in this product. Easy to install, with no problems.
Can be installed in minuets, no mechanical ability needed. True plug and play product.
Fast shipping, Poor packaging, dinged up
Katrina B.
8/29/2022
I am sorry to hear that your wiring harness arrived damaged. I have sent your information over to our customer service department for them to get in touch with you.
Plug and play at it's best.
Working great. Instructions were very helpful. Keep up the great work
good condition
Steve J.
2/25/2017
perfect
Plug and play.
THROUGH NO FAULT OF THEIRS I RECEIVED THE WRONG PART NUMBER. I'm SURE I SAW THE CHEAPER PRICE AND CLICKED ON IT. UPON RECEIPT OF THE PACKAGE I IMMEDIATELY CALLED CRYSTAL AND INFORMED HER OF THE SITUATION. SHE INFORMED ME THAT SHE WOULD SEND THE CORRECT PACKAGE IMMEDIATELY. THE COMPASSION SHE SHOWED WAS EXCELLENT. I HAVE ORDERED ITEMS FROM THIS COMPANY BEFORE AND HAVE ALWAYS HAD EXCELLENT SERVICE. THANKS AGAIN CRYSTAL. WILL BE BACK AGAIN SOME DAY.
Displayed unit not for my vehicle ( my bad). If new product works as easy as video shows, I change my rating to 5 star. Return policy pricing not so good.
Très bonne qualité et fait parfaitement sur ma mustang gt 2000.
great item, made the wiring job extremely easy and with a great price...Thanks very much!
still works great every time I plug it up.
Works great, easy to install
Works great
Product is strong and sturdy -will be used to pull boat. very pleased with product.
Came quick, and was a perfect fit too!! Thanks Again!! Ken B
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Mike L.
4/21/2018
According to Curt, the # C55326 trailer wiring harness does not feature a separate ground wire that needs to connect to the vehicle chassis because the vehicles tail light wiring harness already grounds to the vehicle. An additional connection wasnt necessary.