10" Tall x 67" long heavy-duty ramps let you lift your vehicle for service or display. 5,000 lbs capacity for heavier vehicles. Ramp incline creates a 10.8 degree angle of approach. 2-piece design. Fit tires up to 12" wide.
Features:
Specs:
Race Ramps 67" Heavy-Duty XT Car Service Ramps can be used to lift your heavier vehicle with low-ground-clearance 10" off the ground for service or display. This allows you to perform routine maintenance such as changing your oil, drive belt, or transmission fluid. The ramps have a 10.8 degree angle of approach, which allows you to lift your vehicle without worrying about scraping its front end. It also eliminates the need for heavy jacks and cumbersome jackstands.
The incline section can be removed to convert the ramps into wheel crib configuration, providing maximum access and an unobstructed view of your vehicle's undercarriage. The standalone wheel cribs have a smaller footprint than traditional, bulky display platforms, so they're perfect for servicing and displaying your vehicle at car shows.
These ramps are made of ultra-strong, solid core, high-density EPS foam that won't crack or bounce. Each ramp supports 2,500 lbs - giving you a total weight capacity of 5,000 lbs for lifting a vehicle for service or display. They come in 4 pieces that slide together to form 2 ramps. The ramps are lightweight, weighing no more than 25 pounds per ramp, so you can transport and store them with ease.
The ramps are covered with a textured coating and are flat on one side. This keeps them from skidding when you drive up on them. The coating is a hybrid polyurea compound that is resistant to water and other automotive chemicals commonly found around the garage. And although this coating is durable, it will not scratch, mark, or scrape your garage floor or the ground.
A built-in handle on each ramp makes maneuvering them easier than heavier steel or aluminum ramps. The upper section of the ramps can also hang vertically to free up storage space in your trailer or garage.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody. Andy here with etrailer.com. And today we're gonna take a look at these race ramps heavy duty XT ramps for service and display. Now, these heavy duty ramps are going to provide 10 inches of lift to service or display your vehicle. And these jacks can also replace your heavy jacks and cumbersome jack stands. Now, the incline of these ramps create a 10.8 degree angle of approach.
So what that means for you is these are going to be perfect for your low ground clearance vehicles. And these are going to fit vehicles with tires up to 12 inches wide. Now as you can see, these ramps are in two pieces. So these two pieces are going to easily slide together to form one long ramp. And I'm gonna take that incline off real quick here and I just wanna show you this on this side here of this ramp that we do have built-in straps that are gonna make it very easy to maneuver these ramps and carry these ramps.
Then you can remove the incline section as I have already done and you can use that part of the ramp to give you an unobstructed view of your vehicle's undercarriage if you so desire. So these ramps are going to be very flexible for you in regards to how you want to use these. Now, these ramps are made here in the USA of a very strong and very high density EPS foam construction. So these ramps have a solid core, so this is going to ensure stability and durability for you, and that solid core foam is not going to bounce or crack. And these ramps have a total weight capacity of 5,000 pounds.
So that breaks down to 2,500 pounds for each ramp. And they are lightweight. They weigh about 25 pounds or so per ramp, so they're going to be lightweight. They're going to be easy to use, to assemble, to transport, and to store. And let me give you a closeup here just to show you the coating here.
We have this textured coating that's going to prevent these ramps from slipping or sliding, and then they're going to resist water and automotive fluids. They're not going to scratch. They're not going to mark up or scrape your floor. So again, these ramps are going to be very strong for you, very durable, but also lightweight, easy to use, easy to take the incline section off, easy to replace it. So overall, these are going to be a great option for you if you are looking for ramps such as these. Let me give you some overall measurements. From end to end when these ramps are put together, we're sitting at about 67 inches long. The overall width, we're sitting right at 14 inches wide. And so again, these are going to fit vehicles with tires up to 12 inches wide. And then the overall height at the tallest point here, we're sitting right at about 12 inches tall. So you are going to receive what you see here on my table. You're gonna get these two ramps with two sections per ramp. Well, that's gonna conclude our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.
Average Customer Rating: 4.8 out of 5 stars (5 Customer Reviews)
10" Tall x 67" long heavy-duty ramps let you lift your vehicle for service or display. 5,000 lbs capacity for heavier vehicles. Ramp incline creates a 10.8 degree angle of approach. 2-piece design. Fit tires up to 12" wide.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.