Filter Products
Filter Results
$565.25 - $565.25
$166.25 - $3,379.15
$323.00 - $751.59
$166.25 - $3,379.15
$185.25 - $280.25
Filter by Ramp Type
$565.25 - $565.25
$166.25 - $3,379.15
$323.00 - $751.59
$166.25 - $3,379.15
$185.25 - $280.25
Videos
for Car Ramps
Help Articles
for Car Ramps
Expert Answers
for Car Ramps
I believe you are referring to the 1" prongs on the Stallion Aluminum Car Hauler Ramp Set #288-07503 that are designed to grab onto the small gap at the end of most trailers. This not only provides a secure connection when…
view full answer...We have some confusing pictures on our site for the Gen-Y Aluminum Loading Ramps part #GH34FR and I apologize for that. The actual ramp has a slot mount style on one end and a tapered end on the other which you can use either end depending on what…
view full answer...I do have a solution for you, but the Aluminum Car Hauler Ramp Set #288-07503 that you referenced has a max height of 16" for loading equipment. I did speak with my contact at Gen-Y Hitch who said that their aluminum…
view full answer...In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
view full answer...If you are only putting brakes like the #TRU36FR on one axle, we recommend doing the front axle for a few reasons. First, the front axle technically will bear more weight than the rear. Most trailers it would be about 60% on the front axle and 40%…
view full answer...I was able to verify that the weight capacity for the Aluminum Car Hauler Ramp Set #288-07503 that you referenced is indeed 6,000 pounds (not kilograms) for the pair and 3,000 pounds per panel. The recommended maximum height of 16 inches is simply…
view full answer...I have another option for you, but due to the length of the ramp you would not want to use the Aluminum Car Hauler Ramp Set - 48" x 14-1/2" #288-07501 any higher than 12" as…
view full answer...To change the battery mode on the Progressive Dynamics 9300 Series RV Converter Charger #PD79RR you'll need to insert the included CLAW tool into the small opening next to the battery type indicator light. Press and hold…
view full answer...The Race Ramps Wheel Chock for Vehicle Service part #RR-WC-2 will fit on the main platform of the Race Ramps Heavy-Duty XT Ramps for Service and Display - 67" Long part #RR-XT-2-HD although it may hang off just a bit…
view full answer...I am happy to try to help you find a bearing kit for your Bix Tex trailer. Unfortunately we are not able to recommend a bearing kit based off of just the axle capacity. One way to find out your bearing sizes would be to have a Bix Tex dealership…
view full answer...Each of the Gen-Y Hitch Aluminum Loading Ramps in the Set #GH34FR weigh 94lbs.
view full answer...The CE Smith Boat Trailer #CE48810 that you referenced is equipped with 4.80/4.00-8 bias ply tires that feature a maximum speed rating of 65 mph.
view full answer...Videos
for Car Ramps
Help Articles
for Car Ramps
Expert Answers
for Car Ramps
I believe you are referring to the 1" prongs on the Stallion Aluminum Car Hauler Ramp Set #288-07503 that are designed to grab onto the small gap at the end of most trailers. This not only provides a secure connection…
view full answer...We have some confusing pictures on our site for the Gen-Y Aluminum Loading Ramps part #GH34FR and I apologize for that. The actual ramp has a slot mount style on one end and a tapered end on the other which you can use either end depending on what…
view full answer...I do have a solution for you, but the Aluminum Car Hauler Ramp Set #288-07503 that you referenced has a max height of 16" for loading equipment. I did speak with my contact at Gen-Y Hitch who said that their aluminum…
view full answer...In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
view full answer...If you are only putting brakes like the #TRU36FR on one axle, we recommend doing the front axle for a few reasons. First, the front axle technically will bear more weight than the rear. Most trailers it would be about 60% on the front axle and 40%…
view full answer...I was able to verify that the weight capacity for the Aluminum Car Hauler Ramp Set #288-07503 that you referenced is indeed 6,000 pounds (not kilograms) for the pair and 3,000 pounds per panel. The recommended maximum height of 16 inches is simply…
view full answer...I have another option for you, but due to the length of the ramp you would not want to use the Aluminum Car Hauler Ramp Set - 48" x 14-1/2" #288-07501 any higher than…
view full answer...To change the battery mode on the Progressive Dynamics 9300 Series RV Converter Charger #PD79RR you'll need to insert the included CLAW tool into the small opening next to the battery type indicator light. Press and hold…
view full answer...The Race Ramps Wheel Chock for Vehicle Service part #RR-WC-2 will fit on the main platform of the Race Ramps Heavy-Duty XT Ramps for Service and Display - 67" Long part #RR-XT-2-HD although it may hang off just a bit…
view full answer...I am happy to try to help you find a bearing kit for your Bix Tex trailer. Unfortunately we are not able to recommend a bearing kit based off of just the axle capacity. One way to find out your bearing sizes would be to have a Bix Tex dealership…
view full answer...Each of the Gen-Y Hitch Aluminum Loading Ramps in the Set #GH34FR weigh 94lbs.
view full answer...The CE Smith Boat Trailer #CE48810 that you referenced is equipped with 4.80/4.00-8 bias ply tires that feature a maximum speed rating of 65 mph.
view full answer...