Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
8" Tall x 72" long ramps let you lift your vehicle for service or display. 2-Stage incline with a 6.8 to 10.8 degree angle of approach accommodates vehicles with very low-ground clearance. Fit tires up to 10" wide.
Features:
Specs:
Race Ramps 72" Car Service Ramps can be used to lift your vehicle with very low-ground-clearance 8" off the ground for service or display. This allows you to perform routine maintenance such as changing your oil, drive belt, or transmission fluid. The ramps have a 6.8 degree initial angle of approach which turns into 10.8 degrees halfway up the incline. This allows you to lift your vehicle without worrying about scraping its front end. It also eliminates the need for heavy jacks and cumbersome jackstands.
The incline section can be removed to convert the ramps into wheel crib configuration, providing maximum access and an unobstructed view of your vehicle's undercarriage. The standalone wheel cribs have a smaller footprint than traditional, bulky display platforms, so they're perfect for servicing and displaying your vehicle at car shows.
These ramps are made of ultra-strong, solid core, high-density EPS foam that won't crack or bounce. Each ramp supports 1,500 lbs - giving you a total weight capacity of 3,000 lbs for lifting a vehicle for service or display.
They come in 4 pieces that slide together to form 2 ramps. The ramps are lightweight, weighing no more than 14 pounds per ramp, so you can transport and store them with ease.
The ramps are covered with a textured coating and are flat on one side. This keeps them from skidding when you drive up on them. The coating is a hybrid polyurea compound that is resistant to water and other automotive chemicals commonly found around the garage. And although this coating is durable, it will not scratch, mark, or scrape your garage floor or the ground.
A built-in handle on each ramp makes maneuvering them easier than heavier steel or aluminum ramps. The upper section of the ramps can also hang vertically to free up storage space in your trailer or garage.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody. Andy here with etrailer.com. Let's take a look at these Race Ramps two-stage incline ramps for service and display. Now, these ramps are going to provide eight inches of lift to service or display your vehicle. And these can also replace jacks and cumbersome jack stands. And these ramps feature a two-stage incline that will accommodate vehicles with a very low ground clearance.
So the 6.8 in degree initial approach angle will turn into a 10.8 degree second approach angle. And these are going to fit vehicles with tires that are 10 inches wide. So these ramps will work with tires up to 10 inches wide. The overall width of these ramps are 12 inches, so they'll safely accommodate tires up to 10 inches wide. And while we're talking about measurements, let me give you some additional measurements that might prove helpful for you.
The overall length from end to end, we're sitting at 72 inches long. And then the overall height here at the highest point, we're sitting right at 10 inches tall. Now, the two pieces are going to be able to easily slide together. Let me just give you a brief demonstration of that. So as you can see, I was just able to easily lift up the incline.
And then when I'm ready to reassemble it, just sets right in place. So they're gonna be able to easily slide together to form one long ramp. And let me go ahead and remove this incline again. And I wanted to show you the back of one of these ramps here. We do have a handy strap that's gonna make it very easy to maneuver, to carry, to put in, to place in position.
So that's a nice added benefit. And you're not gonna be struggling with these at all because they're so lightweight. Each ramp weighs about 14 pounds, so they're very durable, but they're gonna be very easy to handle. Now, when you remove the incline, you can still use the portion of the incline section of the ramp here for maximum access to the underside of your vehicle and an unobstructed view of your vehicle's undercarriage. And these are made here in the USA of ultra-strong, high-density EPS foam construction, which will ensure durability and stability. The solid foam core won't bounce or crack. And these do have a total weight capacity of 3,000 pounds. As you probably saw in the bottom of this incline, it does specify the capacity of each ramp. So each ramp is 1,500 pounds, so you'll get a total capacity of 3,000 pounds. And if I didn't mention, each ramp weighs right at 14 pounds. So even though they're very strong and very durable, you're not going to have to break a sweat hauling these around or putting these into place. Now, I wanted to give you a brief close view here of the ramps here, just so you can see the texture. The texture coating is going to prevent these ramps from slipping or sliding. They're gonna resist water and automotive fluids. And what's nice about these ramps, they're not gonna scratch, they're not gonna mark up, or they're not gonna scrape your floor. So if you've got a really nice floor that you're setting these on, you're not gonna have to worry about these ramps damaging your floor. So you are going to receive just what you see here. You're gonna get these two ramps and that's gonna wrap up our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.
Average Customer Rating: 4.8 out of 5 stars (6 Customer Reviews)
8" Tall x 72" long ramps let you lift your vehicle for service or display. 2-Stage incline with a 6.8 to 10.8 degree angle of approach accommodates vehicles with very low-ground clearance. Fit tires up to 10" wide.I’m extremely satisfied with the performance of this ramps. It made a rather tedious and time consuming task a breeze. Not to mention the added safety to myself and the car.
Race Ramps are top notch products. None of the other car ramps would work with my 2021 Mustang Mach 1 with handling package. The service with etrailer was excellent and at a great price. Shipping was fast and arrived as quoted.
Ramps work great on my Dodge Challenger. They do not slip on my garage floor which is painted. The lift is plenty high enough to change the oil and get under the car.
I've used etrailer twice and both times all went well.
The product is as described.
When I bought the item, I needed assistance to make sure the item arrived by a certain date. The staff was incredibly helpful and followed up to make sure everything was OK. Their service is faultless and I would definitely buy from them again.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Felix
8/9/2019
So far, so good. Couldn’t do without them. Dealership will not adhere to proper oil change procedures but I do thanks to these ramps.