8" Tall x 15" long wheel cribs can be used to lift your vehicle for service or display. Replaces cumbersome jackstands. High-density foam with durable protective coating. Fit tires up to 10" wide.
Features:
Specs:
Race Ramps Wheel Cribs are sturdy, solid foam blocks that serve as a tough, but lightweight and rustproof alternative to jackstands. They keep your vehicle safely lifted 8" off the ground for service or display. This allows you to perform routine maintenance such as changing your oil, drive belt, or transmission fluid. Additionally, you can use the cribs for display. To use the wheel cribs, raise your vehicle high enough to slide a crib under each tire, then lower your vehicle. The tires will sit snugly in the precision-molded concave cutouts.
These cribs are made of ultra-strong, solid core, high-density EPS foam that won't crack or bounce. Each crib supports 1,500 lbs - giving you a total weight capacity of 3,000 lbs for lifting a vehicle for service or display. The cribs are lightweight, weighing only 5 pounds per crib, so you can transport and store them with ease.
The cribs are covered with a textured coating and are flat on one side. This keeps them from skidding while your vehicle is lifted. The coating is a hybrid polyurea compound that is resistant to water and other automotive chemicals commonly found around the garage. And although this coating is durable, it will not scratch, mark, or scrape your garage floor or the ground.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the race ramps wheel cribs with an eight inch lift for a quantity of two. Now these wheel cribs will provide eight inches of lift to service or display your vehicle. They are lots of safer, more stable alternative to any jack stands, and they'll give you much more clearance underneath your vehicle. They are lightweight blocks, make it very easy to use, transport, and store. You can see they have these nice strong integrated handles on each end to carry him with.These cribs are ultra strong high density EPS foam construction to ensure durability and stability. They're are solid core foam so they won't bounce or crack, and they have a nice textured coating on them to prevent these cribs from slipping or sliding, and resist water and automotive fluids.
They won't scratch, mark, or scrape your floor. These parts are made in the USA.Few specs on them, the application, these are for vehicles with tires up to 10 inches wide, and they'll fit tires with diameters between 24 inches to 30 inches tall. Weight capacity is 1500 pounds per crib, you can see it on the bottom here, so both of them, the total would be 3000 pounds. The weight on each crib is about five pounds, and this is for quantity of two real cribs.The last thing I want to give you is the dimensions on it. The length of it, the longest part is going to be right at 15 inches long.
Total height at the very tallest part will be right at nine and a quarter inches tall, and then the width on it, it's going to be right at 12 inches wide.But that should do it for the review on the race ramps wheel cribs with the eight inch lift for a quantity of two.
Average Customer Rating: 5.0 out of 5 stars (6 Customer Reviews)
8" Tall x 15" long wheel cribs can be used to lift your vehicle for service or display. Replaces cumbersome jackstands. High-density foam with durable protective coating. Fit tires up to 10" wide.Quality made products , works better than I thought , brings the car up to a good height to work under .I still will use jack stand with this product just for safety reason .all in all Satisfied with my purchase . Fast delivery. Thanks
I have a lift buried in the floor, my garage is only 8’ high, it is great to raise the car using the wheel cribs on one end and ramps on the other. The lift goes back to floor height=this and I slide a piece of plywood over the lift. The car is at a comfortable and safe height to pull a transmission or perform other tasks.
Tom
Perfect for the job at hand, thank you!
We bought this item for our son in law who uses them in car shows for his 1968 Firebird. He is very happy with them.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.