Race Ramps Slip Plate Stands for Service and Display - 14" Lift - Qty 2

Race Ramps Car Ramps - RR-SPS

14" Tall x 18" wide wheel stands are used to support your vehicle for service or display. Lightweight stands provide working platform for wheel alignment. Works with most industry slip plates, grease plates, and turntables.

Features:

• Wheel stands provide 14" of lift to service or display your vehicle
• Lightweight stands provide working platform for wheel alignment
  • Work with most industry slip plates, grease plates, and turntables
  • Replace heavy metal wheel-alignment stands and plate stands
• Lightweight blocks are easy to use, transport, and store
  • Large footprint for stability
  • Built-in strap makes it easy to maneuver and carry blocks
• Ultra-strong, high-density EPS foam construction ensures durability and stability
  • Solid core foam won't bounce or crack
• Textured coating prevents blocks from slipping or sliding and resists water and automotive fluids
  • Won't scratch, mark, or scrape the floor
• Made in the USA

Specs:

• Application: 17-3/4" slip plates
• Weight capacity: 3,000 lbs (1,500 lbs per stand)
• Lift: 14"
• Overall dimensions: 23-3/4" long x 18" wide x 16" tall
  • Wheel crib: 18" wide x 17-3/4" long
• Weight: 16 lbs per stand
• Quantity: 2 stands
• 1-Year limited warranty

Lightweight Wheel-Alignment Stands

Race Ramps Slip Plate Stands can be used as a working platform for wheel-alignment. They are a lightweight and rustproof alternative to heavy metal wheel-alignment stands and plate stands. With a large footprint for stability, they work with most industry slip plates, grease plates, and turntables.

These wheel stands keep your vehicle safely lifted 14" off the ground. To use the stands, raise your vehicle high enough to slide a stand under each tire, then lower your vehicle. In addition to using the stands for wheel alignment, they can also be utilized as display blocks.

Ultra-Strong, Lightweight Construction with Anti-Skid Coating

These stands are made of ultra-strong, solid core, high-density EPS foam that won't crack or bounce. Each stand supports 1,500 lbs - giving you a total weight capacity of 3,000 lbs for lifting a vehicle for service or display. The stands are lightweight, weighing no more than 16 pounds per stand, so you can transport and store them with ease.

The stands are covered with a textured coating and are flat on one side. The coating is a hybrid polyurea compound that is resistant to water and other automotive chemicals commonly found around the garage. And although this coating is durable, it will not scratch, mark, or scrape your garage floor or the ground.

RR-SPS Race Ramps Slip Plate Stands - 14" Lift - Works with Tru-Line - Qty 2