TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
(1490 reviews)
Price: $387.71
In Stock
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
Item # TLC3206
Our Price: $387.71
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (1490)
- Q & A (0)
- Photos
TorkLift Camper Tie-Downs - TLC3206
- Rear Tie-Downs
- TorkLift
- Frame-Mounted
- Custom Fit
- Powder Coated Steel
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Features:
- Creates attachment points for securing your camper to your truck bed
- Pairs with front tie-downs (sold separately)
- Requires turnbuckles (sold separately) to attach camper to tie-downs
- Ensures excellent handling by distributing the weight evenly and lowering the center of gravity
- Avoids a top-heavy setup that would be vulnerable to strong winds and sway
- Remains virtually invisible beneath your vehicle
- Remove the arms and you'll hardly know the brackets are there
- Adjusts for simple, secure connection to camper
- Extend arms out from truck body to clear bowed sidewalls and fenders
- Choose between 2 anchor holes to get the best angle for a secure hold
- Made of black powder coated steel to resist corrosion
- Mounts tight to your vehicle's frame - minimal loss of ground clearance
- Uses pre-existing holes in the frame - little to no drilling required
- Includes 2 rear tie-downs and installation hardware
- Made in the USA
- Lifetime warranty
A Safe Ride is a Comfortable Ride
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity will sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Don't Ruin Your Truck's Looks
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush with the underside of the vehicle. Remove the arms from the brackets when you're not hauling your camper, and the brackets will be barely visible.
Custom Fit, No-Drill Installation
Completely custom to your vehicle, the tie-downs attach to exisiting holes in your frame so that there's little to no drilling and no need for any modifications. Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Securing Your Camper
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
C3206 Tork Lift Truck Camper Tie Down - Rear Frame Mount - Custom Fit
Replaces 39120
This Product Fits The Following Vehicles
- 2001 - 2006 GMC Sierra 2500 HD and 3500 - 8 Foot Bed - with board or step underneath truck bed and with a factory installed hitch
- 2001 - 2006 GMC Sierra 2500 HD and 3500 - 8 Foot Bed - with board or step underneath truck bed and without a hitch
- 2001 - 2006 GMC Sierra 2500 HD and 3500 - 8 Foot Bed - without board or step underneath truck bed and with a factory installed hitch
- 2001 - 2006 GMC Sierra 2500 HD and 3500 - 8 Foot Bed - without board or step underneath truck bed and without a hitch
- 2007 - 2007 GMC Sierra Classic 2500 HD and 3500 - 8 Foot Bed - with board or step underneath truck bed and with a factory installed hitch
- 2007 - 2007 GMC Sierra Classic 2500 HD and 3500 - 8 Foot Bed - with board or step underneath truck bed and without a hitch
- 2007 - 2007 GMC Sierra Classic 2500 HD and 3500 - 8 Foot Bed - without board or step underneath truck bed and with a factory installed hitch
- 2007 - 2007 GMC Sierra Classic 2500 HD and 3500 - 8 Foot Bed - without board or step underneath truck bed and without a hitch
- 2001 - 2006 Chevrolet Silverado 2500 HD and 3500 - 8 Foot Bed - with board or step underneath truck bed and with a factory installed hitch
- 2001 - 2006 Chevrolet Silverado 2500 HD and 3500 - 8 Foot Bed - with board or step underneath truck bed and without a hitch
- 2001 - 2006 Chevrolet Silverado 2500 HD and 3500 - 8 Foot Bed - without board or step underneath truck bed and with a factory installed hitch
- 2001 - 2006 Chevrolet Silverado 2500 HD and 3500 - 8 Foot Bed - without board or step underneath truck bed and without a hitch
- 2007 - 2007 Chevrolet Silverado Classic 2500 HD and 3500 - 8 Foot Bed - with board or step underneath truck bed and with a factory installed hitch
- 2007 - 2007 Chevrolet Silverado Classic 2500 HD and 3500 - 8 Foot Bed - with board or step underneath truck bed and without a hitch
- 2007 - 2007 Chevrolet Silverado Classic 2500 HD and 3500 - 8 Foot Bed - without board or step underneath truck bed and with a factory installed hitch
- 2007 - 2007 Chevrolet Silverado Classic 2500 HD and 3500 - 8 Foot Bed - without board or step underneath truck bed and without a hitch
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear - TLC3206
Average Customer Rating: 4.7 out of 5 stars (1490 Customer Reviews)
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.by: Richard02/14/2024
The rear tie downs do not extend out far enough to avoid the dully rear fender and has damaged the paint on the fender.
by: Jeff09/09/2021
Installed front hitch in front and rear tie-downs.
Solid as a rock and easy to install
by: Janet06/15/2023
The TorkLift tie downs were relatively easy to install. They look great. They are designed well. It will give us peace of mind having them on our truck with our new big camper. We have not gone out camping yet to try them out, but expect good performance from them. Thanks to etrailer for helping us get them.
by: Michael06/27/2019
I order this product for my 2003 Chevrolet Silverado. The quality is as advertised. I did the install myself. The bumper supports on my vehicles bumper are an integrated part of the tie down and not as easy to deal with as I had hoped. But the end result is very solid. Took me about two hours to go the install. Very happy with the quality of the Totklift tie downs.
by: Neil05/10/2022
Easy on, easy off and a solid hold on the camper. They are great and light years ahead of the rear bumper tabs. Can’t believe I ever trusted those things.
by: James S07/02/2020
Great product. Was easy to install. It has
Worked great. The camper came with fast gun tie down system. I would recommend using these also
by: Andrew 08/24/2017
These tie-down supports are sturdy. Istallation was a bit of a challenge and required holes to be drilled to bolt the upper and lower pieces together, because where they matched up there wasn't a hole. I'm not sure if this was missed or done intentionally to allow for proper alignment first. These were advertised as "no drilling required" but that was not the case. Luckly I am somewhat mechanically inclined. If not, I advise a professional does the install.
by: Grant B11/14/2014
I just received this and it looks solid and well built. I tested it to ensure it will fit my Silverado 2500HD. One thing that I noticed is that Torklift's instructions are terrible. I've never seen such poor instructions and bad photos. You might as well throw them in the garbage and figure it out yourself.
by: Zac F06/19/2020
were definitely difficult to install, recommend getting a shop to do it. but afterwards worked great! very adjustable and sturdy.
by: Daniel 03/18/2020
Yes! Thank you, thank you, so much!!! You guys have been awesome to deal with and will recommend and also use in the future! Thank you again!
by: David06/08/2022
Perfect Fit! Great Quality!
by: Patrick 07/23/2021
by: Brenda 03/16/2024
by: Aaron 01/26/2023
by: Penny 10/02/2022
by: Joseph 03/27/2023
by: Al01/28/2021
by: Kenneth 05/20/2021
by: Benjamin 09/19/2021
by: Mark 04/04/2021
by: Charles 12/21/2022
A little tougher to install than the front ones but not too bad. Torklift tie downs are very well made, tried he bumper attached one but I guess bumpers aren't what they used to be I saw bending at the tie down after one trip. So bought these. Entrailer as usual priced well and fast shipping.
by: Tim C03/03/2024
Tommy C recommended the TorkLift Camper Tie-Downs. The Instructions are great and very easy to follow. They supply some cool wire helpers to hold bolts in the frame for you. All went very smoothly and a very secure. I love how solid the Camper feels on the truck.
by: Fred06/02/2023
Got the tie-downs today. Shipped quickly. There is an extrusion ridge on the inside of the square tubing my hitch was made from. I had to file that out. Once done, everything slipped together like an Erector-Set project. Whole thing took 20 minutes. Very pleased.
by: Keith09/05/2022
The package arrived very quickly and intact. I have a 2020 Ford F250 SD Lariat short bed with a factory hitch. The tie-downs were really easy to install although the hitch adapter plate (see attached photo) which is supposed to attach to the end of the tie-down would not fit inside the tubing on my factory installed hitch so I installed without it and it is tight and snug
by: Flanagan06/18/2023
Easy to install. Took less than an hour with no helper. They are very sturdy and I expect them to last.
2020 RAM 3500 with OEM hitch.
25
1489
Show More Reviews
See what our Experts say about this TorkLift Camper Tie-Downs
- Correct TorkLift Custom Frame-Mounted Camper Tie-Downs for a 2006 Chevy Silverado 2500 Ext Cab LBThe correct TorkLift Custom Frame-Mounted Camper Tie-Downs for a 2006 Chevrolet Silverado 2500 Extended Cab 8" Tall Frame 8' Bed is part # TLC3206 for the rear and part # TLC2204 for the front.
view full answer... - Camper Tie Downs Mount to Existing Frame Holes or Is Drilling Required for 2005 Chevrolet SilveradoYes, the TorkLift Custom Frame Mounted Camper Tie-Downs, # TLC4203 and # TLC3206, will fit your 2005 Chevrolet Silverado with running boards and factory installed hitch. I spoke with my contact at TorkLift and he said that the rear tie-downs will not require any drilling for installation. The front tie-downs will require you to drill two 1/2 inch holes, in the side of the frame, on the driver and passenger side of the truck. He did mention that location for the holes were fairly easy to...
view full answer... - Frame Mounted Camper Tie Downs for 2005 Chevy Silverado 3500The correct frame mounted tie downs you'd need for your 2005 Chevy Silverado 3500 with running boards and a factory hitch is the Torklift Tie Downs part number # TLC4203 and # TLC3206 for the front and rear.
view full answer... - Torklift Camper Tie Downs that Fit 2007 GMC Sierra 2500 with Factory HitchYes, the two Torklift camper tie downs part numbers # TLC2204 and # TLC3206 are correct for your 2007 GMC Sierra 2500 long bed without boards and a factory hitch.
view full answer... - Weight Difference Between TorkLift Camper Tie DownsThe weight of the TorkLift Talon Custom Frame-Mounted Camper Tie-Downs # TLC2204 is 21.4 lbs, while # TLC3206 weights 29.5 lbs. Other than # TLC3206 weighing 7.4 lbs more than # TLC2204; # TLC3206A is aluminum and # TLC3206 is black in color. Also, # TLC2204 and # TLC2204A is # TLC2204A is aluminum, and # TLC2204 is black in color.
view full answer... - TorkLift Custom Frame Mounted Tie-Downs for a 2002 Chevrolet 3500 HD Silverado Dually 8ft bedYes, you have the correct items selected. The TorkLift Custom Frame-Mounted Camper Tie-Downs, front, # TLC2204, and rear # TLC3206 will fit the 8' bed HD Models of the Chevy/GMC both 2500 and 3500 versions in either extended or crew cab configuration and in either SRW or DRW. If you prefer the TorkLift Talon aluminum version select the front, # TLC2204A, and rear # TLC3206A options. This is an aluminum and stainless steel premium version. Product review videos are attached. Please...
view full answer... - Recommendation For Camper Tie-Downs For 2006 GMC 2500If you do not have the step underneath then the The Torklift Custom Frame-Mounted Camper Tie-Downs, Item # TLC2204, is a confirmed fit for your 2006 GMC 2500. If you do have the step underneath then you will need Item # TLC4203. The Torklift mounts to attachment points at the front of your truck. It helps to shift the weight of your camper so that you are not top heavy. You will also need the Torklift Frame Mounted Camper Ties for the rear of your vehicle, Item # TLC3206, which works...
view full answer... - Torklift Camper Tie Downs that Fit 2004 Chevy Silverado 2500HD with Factory Hitch and Running BoardThe Torklift Tie Downs part # TLC4203 and # TLC3205 fit your 2004 Chevy Silverado 2500HD gas with a short bed, running boards and a factory hitch. If you had a long bed you'd instead use the # TLC3206 for the rear set instead of the # TLC3205.
view full answer... - Recommended Camper Tie Downs for a 2007 Chevy Silverado 2500HD w/ a Stock Hitch and No Board or StepThanks for the information! I have a couple of options for you that I have listed below which ones you go with will be determined by the bed length of your 2007 Chevy Silverado 2500HD. 2007 Chevy Silverado 2500HD with a 6-1/2' Bed TorkLift Camper Tie-Downs - Custom Frame Mount - Front item # TLC2205 TorkLift Camper Tie-Downs - Custom Frame Mount - Rear item # TLC3205 2007 Chevy Silverado 2500HD with a 8' Bed TorkLift Camper Tie-Downs - Custom Frame Mount - Front item # TLC2204 TorkLift...
view full answer... - TorkLift Custom Camper Tie-Downs for 2003 Chevy Silverado 2500 with 6-1/2 Foot Bed The TorkLift Custom Frame-Mounted Camper Tie Downs # TLC2204 and # TLC3206 that you referenced are designed to fit the 2003 Chevy Silverado 2500 with the 8 foot bed (without a board/step under the bed and without a trailer hitch). If you have the shorter 6-1/2 foot bed these will not line up correctly to the frame rails and some extensions modifications would be needed to make them fit. I cannot recommend doing this as this could negatively affect the integrity of the tie-downs and will...
view full answer... - Recommended Camper Tie-Downs And Turnbuckles For A 2002 GMC Sierra For a 2002 GMC Sierra 3500 Dually 6-1/2 Foot Bed without board or step underneath truck bed and with a factory installed hitch I recommend the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLC2205 and the TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLC3205. If you have a 2002 GMC Sierra 3500 Dually 8 Foot Bed without board or step underneath truck bed and with a factory installed hitch I recommend the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLC2204...
view full answer... - Recommended Front and Rear Camper Tie-Downs for 2004 Chevy Silverado 2500HD With 8' BedThanks for the info, but I do need a little more. Is your Silverado a 1500, 2500 or 3500 and if 1500 or 2500 is it HD or LD? Also, I'd need your bed size and if the hitch is from the factory or is an aftermarket hitch. If you can get back to me with that info I'd be happy to find you the correct tie-downs.
view full answer... - TorkLift Frame Mounted Tie Downs for a 2007 Chevrolet Silverado Classic with 8' BedThere are quite a few option on the fit guide when it comes to camper tie downs, more than likely it is working correctly. The fit guide narrows down the correct part using your year, make, model, bed length, step or no step under bed and hitch type, so it leads to a number of possibilities. Assuming that your 2007 Chevrolet Silverado Classic with 8' bed does not have a board or step under the truck bed and that your hitch is one of the following (factory installed hitch, non-Torklift...
view full answer... - Which Frame-Mounted Camper Tie Downs For 2007 Silverado Classic With 8' Bed And OEM Hitch ReceiverI did some research and it sounds like you have the OEM hitch receiver because the closest one we have to your description is the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75550, which doesn't have open ends as the OEM one does. The recommend camper tie-downs for your 2007 Chevy Silverado Classic with 8 foot bed and OEM receiver are TorkLift # TLC3206 for rear and TorkLift # TLC2204 for front. These do not require welding and offer a simple bolt-on installation....
view full answer... - Camper Tie Down Recommendation for a 2004 Chevy Silverado 3500 Long BedFor your 2004 Chevy Silverado 3500 with an 8 foot bed, no steps, and a factory hitch you would want the Torklift Tie Down part # TLC2204 for the front and then part # TLC3206 for the rear. For turnbuckles you would then want the Torklift Locking FastGun part # TLS9526-2-LK. This with the tie downs will do an excellent job securing the camper you have in the bed of your truck.
view full answer... - Tie Downs for 2003 Chevy Silverado 3500 DuallyFor your 2003 Chevy Silverado Crew Cab dually the correct Torklift Tie downs you'd want are the tie downs part # TLC4203 and # TLC3206 and you'd be set. Then for a set of turnbuckles to attach from from you camper to the tie downs the part # TLS9529-2-LK would be a great option as well.
view full answer... - Torklift Frame-Mount Camper Tiedowns for 2006 Chevy Silverado 2500HD 8 Foot BedThe correct TorkLift camper tie downs for your 2006 Silverado 2500HD 8-foot bed with factory hitch, double/extended cab and steps that end at the cab are part # TLC2204 for the front set and # TLC3206 for the rear. Both have the removable arms you're looking for. For matching FastGun turnbuckles that lock use kit # TLS9529-2-LK.
view full answer...
- Correct TorkLift Custom Frame-Mounted Camper Tie-Downs for a 2002 Chevy Silverado 3500The correct set of TorkLift Custom Frame-Mounted Camper Tie-Downs for a 2002 Chevrolet Silverado 3500 with no step/running boards and with a factory trailer hitch is part # TLC2204 for the front and part # TLC3206 for the rear if you have an 8' bed or part # TLC2205 for the front and part # TLC3205 for the rear if you have a 6.5' bed. If you don't already have a set of turnbuckles, the TorkLift Locking FastGun Turnbuckles part # TLS9522-2-LK are what I recommend.
view full answer... - TorkLift Custom Frame Mounted Tie-Downs for a 2002 Chevrolet 3500 HD Silverado Dually 8ft bedThe TorkLift Custom Frame-Mounted Camper Tie-Downs, front, # TLC2204, and rear # TLC3206 are for the 8' bed HD Models of the Chevy/GMC 2500 and all 3500 versions, including regular cab, extended or crew cab configuration with either SRW or DRW. The TorkLift Talon aluminum version, front, # TLC2204A, and rear # TLC3206A, is an aluminum and stainless steel premium version of the same. These part numbers are for the 8" frame of 3500 series labeled trucks and the HD identified 1500 and 2500...
view full answer... - Will TorkLift Tie Downs from a 2004 GMC Sierra 2500 Long Bed Fit a 2015 Sierra 3500 Long BedIt looks like the TorkLift tie downs for your old 2004 GMC Sierra 2500 long bed were # TLC2204 for the front and # TLR3503, # TLR3504, # TLC3206, or # TLR3501 for the rear. The 2015 GMC Sierra 3500 Crew Cab long bed uses # TLC2220A for the front and # TLC3212A for the rear if it is without board or step underneath truck bed and with a factory installed hitch or TorkLift SuperHitch or without a hitch or # TLC2219 and # TLR3500 if it is without board or step underneath truck bed and with...
view full answer...
Do you have a question about this Camper Tie-Down?
Info for this part was:
Written by:
Lindsey S
Installed by:
Jeff D
Installed by:
David F
Video Edited:
Dustin K
Updated by:
Wilson B
Updated by:
Isabelle B
Updated by:
Amanda K
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Brooke M.
2/26/2024
Oh, gosh! Would you be able to send in photos of what is happening? Id love to take those to the manufacturer and ask them about it, too.