Recommended Camper Tie Downs for a 2007 Chevy Silverado 2500HD w/ a Stock Hitch and No Board or Step

Question

Question:

Looking for the correct frame mounted camper tie downs for a 2007 Chevy Silverado 2500 HD with a step that runs just below the cab and not below the truck bed and has a stock hitch.

asked by: A.J.

0

Expert Reply:

Thanks for the information! I have a couple of options for you that I have listed below which ones you go with will be determined by the bed length of your 2007 Chevy Silverado 2500HD.

2007 Chevy Silverado 2500HD with a 6-1/2' Bed

TorkLift Camper Tie-Downs - Custom Frame Mount - Front item # TLC2205

TorkLift Camper Tie-Downs - Custom Frame Mount - Rear item # TLC3205

2007 Chevy Silverado 2500HD with a 8' Bed

TorkLift Camper Tie-Downs - Custom Frame Mount - Front item # TLC2204

TorkLift Camper Tie-Downs - Custom Frame Mount - Rear item # TLC3206

expert reply by: Jerred H

0

Answer 1

The front and rear Torklift tie downs you need for your 2006 Chevy Silverado 2500 short bed without steps and a factory hitch are the part numbers #TLC2205 and #TLC3205.

view full answer...

Answer 2

If the tube step on your 2006 Chevy Silverado 2500 short bed is only under the cab of the truck and no part of it is attached beyond the back of the cab then you would look at the tie downs for models without a board or step under the truck bed and…

view full answer...

Answer 3

When it comes to add a hitch extender on your 2006 Chevrolet Silverado 2500 HD with a 6-1/2 foot bed first you will need to install The TorkLift SuperHitch Original Trailer Hitch Receiver - Custom Fit - Class V - Dual 2 inch Receivers #TLC1204. This…

view full answer...

Answer 4

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 5

The TorkLift Talon Custom Frame-Mounted Camper Tie-Downs #TLC3205A is a fit for your 2006 Chevrolet Silverado 2500 HD and 3500, I've also attached a list of compatible vehicles that #TLC3205A will work on.

view full answer...

Answer 6

I have attached some photos showing what bolts the bottom brackets from the TorkLift Custom Frame-Mounted Camper Tie-Downs #TLC3205 will fit on compared to the photo you sent in. That upper tab with the 2 bolt holes will be on the rear-side of your…

view full answer...

Answer 7

Thanks for the photo it was really helpful and based on that, you do have the OEM hitch for your 2003 Chevy Silverado 2500HD. The hitch is unique in that it has the same open-end on the tubes, the same brackets, and same chain loops, which are all…

view full answer...

Answer 8

Hey David, thank you for the photos and explanation! That is most definitely an Aries Grille Guard, and if it came off of a 2006 Chevy Silverado 1500 then we're looking at the part #AA4059-2 which will also fit your 2003 model by using the…

view full answer...

Answer 9

We don't have the specific number but what I think will be more helpful for you is the distance from the rear most portion of the bumper to the hitch pin hole. Which for the #41932 that dimension is 1-1/2 inches. Check out the picture I attached…

view full answer...