Will TorkLift Tie Downs from a 2004 GMC Sierra 2500 Long Bed Fit a 2015 Sierra 3500 Long Bed

Question

Question:

We have a 2004 gmc 2500 crew cab long box. We with torklift and tie downs. We are upgrading to 2015 gmc 3500 Denali crew cab long box. Looks like they are not interchangable...are we correct??

asked by: Sandi

0

Expert Reply:

It looks like the TorkLift tie downs for your old 2004 GMC Sierra 2500 long bed were # TLC2204 for the front and # TLR3503, # TLR3504, # TLC3206, or # TLR3501 for the rear.

The 2015 GMC Sierra 3500 Crew Cab long bed uses # TLC2220A for the front and # TLC3212A for the rear if it is without board or step underneath truck bed and with a factory installed hitch or TorkLift SuperHitch or without a hitch or # TLC2219 and # TLR3500 if it is without board or step underneath truck bed and with a non-Torklift aftermarket hitch.

So none of the parts overlap between the 20014 and 2015 models. I have included a link to the TorkLift tie down main page for your truck. Just use the drop down menu to select the proper configuration of your truck to see the options.

expert reply by: Michael H

0

Answer 1

The TorkLift Custom Frame-Mounted Camper Tie-Downs #TLC4204 (front) and #TLC3212 (rear) will fit your dually 2011 Chevy Silverado 3500 Crew Cab with an 8 foot bed, cab-length running boards and a factory hitch. I have added a photo of these…

view full answer...

Answer 2

For your 2002 Chevy 1500 Short Bed Crew Cab 4x4 (with the #DT45512 hitch you mentioned), you will need the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front #TLC2205 and the Rear #TLR3501. These are the confirmed fit for your truck. If you…

view full answer...

Answer 3

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors…

view full answer...

Answer 4

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory…

view full answer...

Answer 5

Hey Mark, thanks for the question, and while we have exactly what you're looking for, it's actually a different part number (the one you mentioned is for a long bed). I went ahead and verified for you the correct SuperHitch for your 2018…

view full answer...

Answer 6

That's a good question Mark, and yeah I agree, it would make sense for the screws to be on the bottom when using the Gen-Y Anti-Rattle Clamp for 2-1/2" Hitch Receivers #GY28XR. It'll work either way, but they're on the top mostly for…

view full answer...

Answer 7

The Replacement Pivot Arm "A" #BW3035A you found will fit on either the left or right hand side of your B&W Companion Base #BWRVB3500. You will need a Replacement Pivot Arm "B" #BW3035B for the opposite side of the…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Will TorkLift Tie Downs from a 2004 GMC Sierra 2500 Long Bed Fit a 2015 Sierra 3500 Long Bed

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching