Demco Hydraulic Brake Actuator - Disc - Primed - 2-5/16" Ball - 20,000 lbs

Demco Brake Actuator - DM8203102

Surge-type actuator features a rustproof aluminum master cylinder and a primed finish. eZ-Latch coupler mechanism makes hookup a snap. Weld-on application.

Features:

• Hydraulic actuator activates trailer's brakes when tow vehicle slows or stops
• eZ-Latch coupler mechanism for simple, secure hookup and disconnect
  • Lets you hook up when latch is in closed position - just drop coupler over hitch ball and latch will snap into place
• Heavy-duty, aluminum master cylinder is durable, rustproof, and efficient
  • Built for high-pressure applications
  • Allows 50 percent greater displacement than standard master cylinders
• Acetal copolymer lining provides smooth operation as actuator telescopes in and out
• Breakaway included
  • Snap hook on safety cable ensures secure connection to breakaway lever
• Durable steel construction
• Primed finish
• Weld-on installation
• Made in the USA

Specs:

• Application: trailers with hydraulic disc brakes
• Ball size: 2-5/16"
• Gross towing weight: 20,000 lbs
• Maximum tongue weight: 2,000 lbs
• Mounting: straight, 3" wide trailer tongue
• Model number: DA20
• 1-Year warranty

Note: Because this actuator does not include a reverse lockout, it is recommended that you equip your trailer with free-backing brakes so that you can drive in reverse without the actuator triggering your trailer's brakes.

When you apply the brakes in your tow vehicle, deceleration occurs and momentum pushes your trailer toward the rear of your vehicle. With surge brake systems, the hydraulic actuator is triggered as your trailer moves forward, once your tow vehicle starts to slow down. When this happens, the actuator contracts, applying force to its master cylinder. This in turn supplies the necessary hydraulic pressure to engage your trailer's brakes.

eZ-Latch Coupler

The coupler portion of this trailer brake actuator features a simple-to-use latching mechanism known as the eZ-Latch. With this mechanism, hooking up is as easy as dropping the coupler over your trailer hitch ball. The latch does not need to be tugged or manually activated to allow the ball into the coupler socket, nor does it have to be secured in place. Just make sure that the coupler is properly lined up with the ball when you lower it, and the rest is automatic.

8203102 Demco DA20 Hydraulic Trailer Brake Actuator for Disc Brakes - 2-5/16" Ball Easy Latch Coupler - 20,000 lbs