Taylor Made Hull Gard Double-Eye Oval Boat Fender for 20' to 25' Long Boats - White Vinyl

Video Transcript for Review of Taylor Made Boat Accessories - Boat Fenders - 3691023

Hi there, I'm Michael with etrailer.com. Today we're taking a look at the Taylor Made Hull Gard Inflatable Vinyl Boat Fender.This is going to help protect your boat from contact with other boats while you're out in the water or against the dock while you're loading and unloading. As you can see, it's going to have a lot of give. It's going to absorb that contact to prevent any sort of damage to your boat.It is obviously made out of a white vinyl. It's pretty heavy duty. It's not going to...

It's pretty thick vinyl, so you're not going to have to worry about it breaking down. It does have a unique oval design. So you can see there it's kind of round, but just enough that it's not going to continually roll and get out of place. It's going to stay where you need it to be. So it's there when you need.It does have the rubber needle valve that's going to make it a lot easier for you to air this up.

They do recommend inflating the fender to about two PSI, because this is integrated, it's going to last a lot longer rather than being glued in or something like that. It's going to hold up well. You do have the reinforced molded eyelets. It's going to help prevent any sort of tearing your eye diameter, sorry, the hole here, the diameter is going to be about 7/8 of an inch.The overall dimensions we're going to be sitting there about 6.5 inches tall, pretty close to what the description says. And we're at about 23 inches wide, see there.

This is going to be designed for boats that are 20 to 25 feet long. This is made here in the USA and it does come with a limited lifetime warranty from Taylor Made.That's going to complete our look at the Taylor Made Hull Gard Inflatable Vinyl Boat Fender..