Filter Products
Filter by Application
Videos
for Boat Bumpers
Help Articles
for Boat Bumpers
Expert Answers
for Boat Bumpers
Yes, the DeeMaxx Disc Brake Assembly #DE89YR will work with the Dexter Vault service kit.
view full answer...Thank you for all of the photos and information! From what I can see it looks like you have a #84 spindle but that inner bearing blew out so you should be able to remove that inner sleeve that looks like…
view full answer...We have that size (see link), but none of the tires are radial. They are all bias ply as that is the common construction for the LT tires. The closest tire size that is radial would be the 235/80R16 like part #TTWTRTM2358016E. This size has a…
view full answer...The Kenda 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range B #AM30590 have a max speed of 65 mph. When trailer tires are not speed rated with a letter,…
view full answer...The Westin Custom Fit Truck Bed Mat #50-6405 will fit perfectly in your 2022 Ford F-250 Super Duty Short Bed and you won't need to trim anything! Just be mindful that these come rolled…
view full answer...The Electric Jack w/ Footplate is offered both with the plug part #EJ-3527-BBX and without the plug part #EJ-3520-BBX. Therefore, if you wanted to go with the model that has the plug and just cut that off you would indeed just run the wire to the…
view full answer...It is recommended to cover all of the exposed wood. When the wood is exposed there is a greater risk of rot and damage. The carpeting is made of breathable polyester which makes sure it can dry out so no mold will build up and damage the wood or…
view full answer...I might have an option for you but we don't offer any flush door latches with an extended striker. However, the Full Size Locking Steel Flush Door Latch part #L3980 matches your door…
view full answer...The rails of the RetraxPRO MX Hard Tonneau Cover #RE57FR are going to block the stake pocket a bit so you'd most likely have to notch the rails as well if you wanted to keep the sports…
view full answer...The #CE10002G-4 CE Smith Bolster and Swivel is 13" tall. Assuming you mount it at the position to gain the most height, you should have…
view full answer...For a u-bolt that will fit a 3" wide x 1-1/2" tall trailer frame you can use the CE Smith U-Bolt part #CE15252A which…
view full answer...I went out to the warehouse and pulled a CE Smith U-Bolt, part #CE15252A and took some measurements for you. The threaded portion is 2-1/16". The outside width is…
view full answer...Videos
for Boat Bumpers
Help Articles
for Boat Bumpers
Expert Answers
for Boat Bumpers
Yes, the DeeMaxx Disc Brake Assembly #DE89YR will work with the Dexter Vault service kit.
view full answer...Thank you for all of the photos and information! From what I can see it looks like you have a #84 spindle but that inner bearing blew out so you should be able to remove that inner sleeve that looks like…
view full answer...We have that size (see link), but none of the tires are radial. They are all bias ply as that is the common construction for the LT tires. The closest tire size that is radial would be the 235/80R16 like part #TTWTRTM2358016E. This size has a…
view full answer...The Kenda 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range B #AM30590 have a max speed of 65 mph. When trailer tires are not speed rated with a…
view full answer...The Westin Custom Fit Truck Bed Mat #50-6405 will fit perfectly in your 2022 Ford F-250 Super Duty Short Bed and you won't need to trim anything! Just be mindful that these come…
view full answer...The Electric Jack w/ Footplate is offered both with the plug part #EJ-3527-BBX and without the plug part #EJ-3520-BBX. Therefore, if you wanted to go with the model that has the plug and just cut that off you would indeed just run the wire to the…
view full answer...It is recommended to cover all of the exposed wood. When the wood is exposed there is a greater risk of rot and damage. The carpeting is made of breathable polyester which makes sure it can dry out so no mold will build up and damage the wood or…
view full answer...I might have an option for you but we don't offer any flush door latches with an extended striker. However, the Full Size Locking Steel Flush Door Latch part #L3980 matches your…
view full answer...The rails of the RetraxPRO MX Hard Tonneau Cover #RE57FR are going to block the stake pocket a bit so you'd most likely have to notch the rails as well if you wanted to keep the…
view full answer...The #CE10002G-4 CE Smith Bolster and Swivel is 13" tall. Assuming you mount it at the position to gain the most height, you should have…
view full answer...For a u-bolt that will fit a 3" wide x 1-1/2" tall trailer frame you can use the CE Smith U-Bolt part #CE15252A…
view full answer...I went out to the warehouse and pulled a CE Smith U-Bolt, part #CE15252A and took some measurements for you. The threaded portion is 2-1/16". The outside width is…
view full answer...