Bar faucet makes sure that entire family has easy access to cold, clean drinking water. Compression valve stems ensure your faucet fully turns on and off. Standard-flow aerator provides the water pressure you need to fill your drinking glass faster.
Features:
Specs:
This deck-mount faucet lets you upgrade the bar (or prep) faucet in your RV or camper. Using the standard NPSM inlet shanks, drop the new faucet and deck plate in place through the mounting holes of your existing faucet. Then hand-tighten the included mounting nuts against the underside of the counter, and connect the hot and cold water lines. The use of tub and tile caulk (not included) is required.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the Phoenix faucet's chrome finish 4 inch dual Mob RB bar faucet with the 6 inch bar spout. The base on this is a chrome plastic construction. The spout itself is a chrome metal platted construction. Does use a Dura Pro under body with a plastic compression valve. The knobs themselves are a dual, clear, acrylic knob for the hot and cold water. The bar spout is a 6 inch rotating bar spout. The flow rate on this faucet is 2.2 gallons per minute.
It is a 2 hole mount. You can see right here. These are your two water connections for your hot and cold water. The distance between those center to center is right at 4 inches. When you go to install these, it comes with these included plastic lock nuts on both sides. You take those off, line your holes with the holes in the sink of the counter, drop it into place and then secure it into place by tightening these plastic lock nuts on. The spout height is 6 inches and that's measured from right here to the very bottom.
If you put a ruler on that, you can see it's going to be 6 inches for the spout height. The overall height, which will be measured including the base, from the bottom of the base to the very top is going to be right at 8 1/4 inches. The width of the base from this end to this end, we put a ruler on that, you see is going to be right at 6 1/4 inches. The total depth would be that after it's installed if you measure it from the very back of the base to the spout at the furthest point it extends out. If we put a ruler on that, the very back all the way out, you can see it's going to be right at 5 inches for the depth. Then the shank link on the threaded shanks that connect to your water connections, the depth on that shank from the bottom of the base to the end is going to be right at 2 inches. The faucet does come with a nice set of detailed instructions.
These instructions will give you information on how to install it and on the very back it will list the parts list of all the parts that are included in this product. That should do it for the review on the Phoenix faucet's chrome finish 4 inch dual Mob RB bar faucet with the 6 inch bar spout.
Average Customer Rating: 4.7 out of 5 stars (288 Customer Reviews)
Bar faucet makes sure that entire family has easy access to cold, clean drinking water. Compression valve stems ensure your faucet fully turns on and off. Standard-flow aerator provides the water pressure you need to fill your drinking glass faster.Horse trailer living quarters wasn't winterized last year. Had to replace all faucets and shower valves. Had every thing. Everything fit and fast shipping.
Fit as expected and was super easy to install. Looks as wonderful as it works!
You were the only online shop that had exactly what I was looking for. It’s for my boat, which is in some ways a lot like a travel trailer, there were plenty of other places online that had “almost” what I was looking for - your focus on mobile living products made the difference.
The faucet was exactly what was needed for the small space. It makes a perfect bathroom sink faucet for my corner, tight spaced sink.
We really love this faucet! The spout is nice and high, and will accommodate any size pot or other thing that we need to put under it.
It worked great
Great fit easy ordering
Great company that was easy to work with and place order. Quality product.
Very easy to install and works great.
Happy with faucett
great product, easy to install with a great price. Fast shipping also!! Will use again!
The only problem is the one I bought a year ago has been leaking in the hot faucet for half the time I’ve had it……leaks only when I turn the hot water on. Hopefully this new one will last longer. I like the long neck.
Really like this faucet. The extra height allows much easier washing of larger items in our small sink. I also like the handles as opposed to knobs. Can turn on and off easily with the back of my hand instead of having to grab and twist.
Not satisfied. The end of the faucet was plastic and it was cracked and water sprayed all over my camper when I hooked it up to the water.
I'm perfectly pleased with everything shipping was great and the product was exactly as described.***** I have a 1978 dodge sportsmen royal class C and the facet was a perfect match. *****
Do you have a question about this RV Faucet?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.