Is Replacement Hardware Bag for Yakima LandingPad 1 Steel or Aluminum

Question

Question:

Do you know if these screws and plates are made of aluminum or steel?

asked by: David

0

Expert Reply:

The screws and plates of the Replacement Hardware Bag for Yakima LandingPad 1 # Y8890028 are made of steel that is zinc coated.

expert reply by: Jameson C

0

Answer 1

The hardware kit for LandingPad1 part #Y8890028 comes with components for all four landing pads.

view full answer...

Answer 2

The difference between Landing Pad 1 #Y00221 and Landing Pad 4 #Y00224 is the hardware. For LP1 the 'A' plate dimension is 7/8" x 11/16" and for LP4 the 'C' plate dimension is 1 3/16" x 13/16" so they fit different…

view full answer...

Answer 3

The T-bolts in the Yakima Replacement T-Bolt with Nut for Yakima Rack and Roll Trailers #Y8880184 are going to measure 3/8" x 1" long. The next size up would be 3" long, but if you can let me know the product you're trying to…

view full answer...

Answer 4

We have a few systems that will fit the factory tracks on your 2018 Mercedes-Benz Sprinter. If you want the 2 Crossbar system, I recommend the following: Rhino-Rack Vortex Aero Crossbars - 71" Long - Qty 2 #RRVA180B-2 Quick Mount Legs - RTC and…

view full answer...

Answer 5

The thread size of the Replacement Anchor Plate #Y8810074 is M6.

view full answer...

Answer 6

Here are the 2 different mounting options for installing the Batwing and Foxwing Awning Relocation Kit #RR31102. You can change the orientation of the brackets so that the awning will either hang higher or lower depending on your application.

view full answer...

Answer 7

The thickness of the T-bolt head of the part #Y8880184 you referenced is 5/32 of an inch. I attached a picture that has all of the other dimensions as well. These T-bolts are M10 x 1.5 x 25

view full answer...

Answer 8

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 9

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 10

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 11

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 12

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Is Replacement Hardware Bag for Yakima LandingPad 1 Steel or Aluminum

Product Page this Question was Asked From

Continue Researching