Size of Anchor Plate That Comes With Replacement Hardware Bag for Yakima LandingPad 1

Question

Question:

What are the dimensions of the nut?

asked by: John

0

Expert Reply:

The anchor plates that come with the Replacement Hardware Bag for Yakima LandingPad 1 part # Y8890028 are 3/4" x 7/8". The thread size for the bolt is M6.

expert reply by: Conner L

0

Answer 1

The plates of the #Y10156 are steel and 1/8 inch thick.

view full answer...

Answer 2

It would actually be better to have the canoe either all on the camper shell or all on the cab of the truck. When a load is split between the 2 it could result in problems because the truck bed can move some independently from the cab. The artificial…

view full answer...

Answer 3

I spoke to my Yakima contact and he informed me that you will need the Landing Pad 1 #Y00221 for the tracks on your Leer camper. To complete your roof rack setup you will need: quantity 2 of the Landing Pad 1 #Y00221 quantity 4 of the Control Towers…

view full answer...

Answer 4

The replacement hardware for the Replacement FootBase Thule Tracker RoofRack FitKits item #753-2149 is the Replacement M6 x 17 mm Bolt for Thule Tracker II Half Foot Pack or Fit Kits item #924-0617-15. Other replacement parts for the Footbase:…

view full answer...

Answer 5

Replacement Track Nut for Thule Tracker II Half Foot Pack or Tracker Fit Kits TK6, TK8, TK9 #853-2106 is made to be used with Replacement M6 x 17 mm Bolt for Thule Tracker II Half Foot Pack or Fit Kits #924-0617-15. The threading on both parts is M6…

view full answer...

Answer 6

It looks like you need the Replacement FootBase #753-2149 for the Thule Tracker roof rack. The hardware you need includes the following: Track Nut #853-2106 M6 x 17 mm Bolt #924-0617-15 M6 Washer #951061254 You'll want to reuse your Spacer…

view full answer...

Answer 7

The Replacement Track Nut for Thule Tracker II Half Foot Pack or Tracker Fit Kits TK6, TK8, TK9 #853-2106 will fit in your tracks and were designed to secure the Tracker II feet to the rail using bolt #924-0617-15. Without knowing what towers you are…

view full answer...

Answer 8

According to Thule, at one time they did the OEM roof racks for BMW/Mini, but that's been several years ago so they can't provide any information on anything more recent than 8 or so years ago. The good news is that I can simply provide you…

view full answer...

Answer 9

To mount one crossbar to your 2021 Toyota Tacoma Double Cab I recommend the Base Line Towers #Y28TR, Round 48" Crossbar #Y8810021, Round Bar Adapter #Y03536, and Base Clip Fit Kit #Y06128 if you are mounting the crossbar on the rear of the…

view full answer...

Answer 10

With the tongue weight of the trailer and the weight of the topper, the Sumo Springs #SSR-612-47 with a 1000-lbs capacity are the right choice since Sumo Springs are progressively load bearing; this means that they get stiffer as more weight is…

view full answer...

Answer 11

I have another option for you, but you are correct that the Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle #F2410 you were looking at for your 2021 Toyota Tacoma SR5 2WD requires the axle to be above the leaf springs, and…

view full answer...

Answer 12

You are definitely on the right track with the SumoSprings. For your 2021 Toyota Tacoma, I recommend using the SumoSprings Solo Custom Helper Springs - Rear Axle #SSR-612-47. The reason why is because this model of SumoSprings will provide your…

view full answer...

Size of Anchor Plate That Comes With Replacement Hardware Bag for Yakima LandingPad 1

Product Page this Question was Asked From

Continue Researching