Mount-n-Lock Heavy-Haul'r Replacement RV Bumper - 6.0" Wide - 600 lbs - Brushed Finish

Video Transcript for Review of Mount-n-Lock RV Cargo Carrier - Replacement RV Bumper - MNT93VR

Hello, everybody. This is Jeff with etrailer.com. Today we're gonna take a look at this Mount-n-Lock Heavy-Haul'r, 92-inch long, 6-inch wide aluminum RV replacement bumper with the brushed finish, has a 600-pound weight capacity. Now this bumper kit will let you add a bumper or replace your stock RV bumper for extra durability and a higher weight rating. It's a nice heavy-duty aluminum bumper. Gives you a higher weight rating so that you can safely haul your bikes or your generator to your campsite.

It is also great for supporting cargo carriers and other bumper-mounted accessories. Now to install this, it does include the heavy-duty brackets. I wanna zoom in on that. But basically there's five brackets together on this side, five on this side, and they'll clamp around the bumper and help reinforce the bumper to prevent any heavy loads from damaging it. And it'll be less likely to lead the bumper detachment compared to a stock bumper with the same weight on it.

We do also offer, if you need to add a 2-inch hitch to this bumper, we do sell a part number MO64VR. It's listed on this product page as a related product, and that'll clamp around the bumper and give you a 2-inch hitch receiver. Just wanna pop up an insert to show you what I'm talking about. That's the part number right there, and you can see how it bolts around this and gives you access to a 2-inch hitch receiver opening. Now this is a hollow compartment.

If you look on each end, they have these vented end plates, one on this end and one on the other end. It'll help you store your smelling sewer hoses and the fittings. What's nice about it is, when you put the hoses and fittings in there, these vents on here will circulate fresh air to prevent moisture and mold buildup. And the way you install your hose, you just lift up on this plate. It slides just like that, out of the way.

Put your hoses in there, put your fittings in there, and then when they're all in there, just drop this plate back in place to hold 'em in place. Now this is a rustproof, lightweight aluminum construction, has a nice brushed finish to it and the brushed finish will be shiny and it hides scratches, but it will hold onto dirt since it is a rough surface. This bumper is also available on a raw mill finish that'll show scratches and discolorization. Also, it comes in a glossy black powder coat mirror-like finish. And again, those are sold separately on our website. This is a bolt-on installation, we mentioned, onto your RV's frame with the included brackets here, some drilling is required. Now, if your RV frame is shorter than your RV's body, you will need the extension plates that we sell separately, part number MO24VR. Or if your RV's body extends to the bottom of the frame, you'll need the drop plates that we sell separately, part number MO84VR. Now this part is made in the USA. Application, this will fit I-beam, S-beam, tube, and channel frames. Now if your trailer has a flanged frame on it, they must be at least 4 inches tall and 3 inches long. If it's a non-flanged frame, they must be 3-inch tall by 3-inch long. Dimension on this, the overall length from one end to the other is 92 inches long. It is 6 inches wide by 6 inches tall. Maximum capacity, again, is 600 pounds when it's evenly distributed. And the weight on this bumper is 42 pounds. But that should do it for the review on this Mount-n-Lock Heavy-Haul'r, 92-inch long, 6-inch wide aluminum RV replacement bumper with the brushed finish.