Dimensions of the Lift Extenders for HappiJac Truck Camper Jack Systems Tube

Question

Question:

What is the dimensions of the tubes used for support?

asked by: Peter

0

Expert Reply:

I contacted the manufacturer about the dimensions of the Lift Extenders for HappiJac Truck Camper Jack Systems # LC182495. They informed me that the Lift Extenders for HappiJac Truck Camper Jack Systems # LC182495 are made from the same tubing used to make the inner leg of the camper jack and that the tube is 1.75” square.

expert reply by: Scott S

0

HappiJac Lift Extender Dimensions
(click to enlarge)

Answer 1

The distance between the mounting holes of the Lift Extenders for HappiJac Truck Camper Jacks #LC182495 that you referenced is 3-1/8 inches on center.

view full answer...

Answer 2

Truck campers are certainly a cool, niche way to go rv'ing, and I can understand why you'd want some additional clearance getting past that wheel well on your dually Ford F-350 to make the experience even more enjoyable. The #LC182496…

view full answer...

Answer 3

While the TorkLift Basic SpringLoad Turnbuckles for Camper Tie-Downs - Qty 2 part #TLS9000 are awesome to prevent the overloading or twisting we can sometimes get. They are not available as just the barrels. They are sold as a kit to make it easy…

view full answer...

Answer 4

To use the Torklift Turnbuckles part #TLS9522 that you have you do not also need the #TLS9000. These kits essentially do the same thing and both would not be required.

view full answer...

Answer 5

When drilling into your jack stands I would recommend using a 135 degree drill bit like The 5/8 inch Drill Bit #7164. This drill bit has 135 degree split points which will give you an easier start on flat surfaces. It is made of high carbon, M-2…

view full answer...

Answer 6

The Swing Out Extension Brackets #LC182496 can be left in the out position and not swung in. Since your 2010 Ram 4500 has a flat bed the part I think you are looking for is the HappiJac Extender Bracket #HJ54FR. This is a fixed extender that does…

view full answer...

Answer 7

If one set of the HappiJac Extender Brackets part #HJ54FR doesn't provide enough clearance Happijac has told us that you can use a second set to gain additional clearance.

view full answer...

Answer 8

Based on the Happijac setup you have the correct electric upgrade kit you'd need is the #LC733960-182524.

view full answer...

Answer 9

The Manual-to-Electric Conversion Kit for HappiJac Truck Camper Jack Systems Item #LC733960-182524 has everything you need to convert to electric jacks and will not require any special tools to install.

view full answer...

Answer 10

The mounting holes of the Swing Out Extension Brackets part #LC182496 that you referenced are for the side that attaches to the jack itself and not the portion that attaches to the camper. You'd need to attach these to the L-bracket on the camper…

view full answer...

Answer 11

You are correct that the difference between using the standard mounting option on the HappiJac Electric Truck Camper Jack System #LC736515-ELKIT and adding the Swing Out Extension Brackets for HappiJac Truck Camper Jack Systems #LC182496 is that the…

view full answer...

Dimensions of the Lift Extenders for HappiJac Truck Camper Jack Systems Tube

Product Page this Question was Asked From

Continue Researching