Gen-Y Capture Plate for PullRite 5th Wheel Sliding Hitches

See what our Experts say about this Gen-Y Hitch Accessories and Parts

• Will Demco Hijacker Autoslide 5th Wheel Hitch Work with Gen-Y Hitch Shock Absorbing Pin Box
  The Demco Hijacker Autoslide 5th Wheel Trailer Hitchs like part # DM8550035 are compatible with the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Boxes like part # 325-GH-8040 which fits a Lippert 1621 pattern. That said, you will need an adapter for this, the Gen-Y Capture Plate part # GY98FR but that will be all. This is a great combo which provides both cab clearance and a cushioned ride. Please note, in order to use the Demco Hijacker on a 2020 Chevrolet Silverado 3500 with OEM Prep Pkg...
  view full answer...
• Does Using Gen-Y Capture Plate for Pullrite Hitch Also Require Using Pullrite Capture Plate
  You would only need to use the Gen-Y Capture Plate # GY98FR and the filler shim part # GY76FR and would not need to use the current capture plate as well. You'd only need the Gen-Y components with your Pullrite hitch.
  view full answer...
• How To Use Gen-Y Pin Box With PullRite SuperGlide 5th Wheel Hitch 2714
  The Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box # 325-GH-8040 is going to be what you want. This is a direct replacement for the Lippert 1621 Pin Box. The Gen-Y has a built-in shock absorber that limits bounce and jarring up-and-down motion. This has a towing capacity of 18,000 lbs and a pin weight capacity of 3,500 lbs. My contact at Gen-Y confirmed that it will work with the Pullrite slider hitch, however, you may need Gen-Y Capture Plate for PullRite 5th Wheel Sliding Hitches # GY98FR...
  view full answer...
• Recommended Automatic Sliding 5th Wheel Hitch And Air Springs For A 2023 Chevy Silverado 2500 High C
  Hi Wally, To determine if the truck can tow the trailer you'd need to subtract your truck's curb weight from its Gross Combined Vehicle Weight Rating (GCVWR). This information can typically be found in the owner's manual, on the driver's side door jamb, or on a sticker in the glove box. Once you have this number you can compare it to the GVWR of the trailer to see if the truck is capable of safely towing it. Adding air springs in to help support the suspension would definitely be a good...
  view full answer...
• Can Gen-Y Pin Box Be Used with Demco Hijacker Autoslide 5th Wheel Hitch
  Yes, a Gen-Y pin box, like part # 325-GH-8040 you're looking at, is compatible with the Demco Hijacker Autoslide 5th wheel hitch as long as you use the Capture Plate # GY98FR. The Gen-Y pin boxes are specific on what they are replacements for, Lippert 1621/1621HD for example, and the tongue weight calculation is a little different than normal. If you let me know your pin box number and tongue weight capacity I'd be more than happy to help make sure you get the correct Gen-Y pin box!
  view full answer...
• Is A Capture Plate Needed To Tow A Trailer With A Gen-Y Pin Box With A Demco Autoslide
  Yes, you'll need capture plate # GY98FR in order to tow a trailer with a Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box # 325-GH-8040 using a Demco Autoslide 5th Wheel Hitch # DM8550034. As the head of the Autoslide turns it slides back giving you more turning clearance. Without a capture plate the king pin would be able to rotate in the jaws of the hitch and wouldn't force the head to turn and slide back.
  view full answer...
• How to Determine Correct Capture/Locking Plate for a PullRite 4500 OE Puck Series 24K SuperGlide
  That greatly depends on what pin box you have on your Paradigm 395DS. For example, we have the MORryde Pin Box Adapter # MR57ZR as well as the Gen-Y Capture Plate # GY98FR - both of these accomplish the same goal but are for different fitments so they aren't interchangeable. If you can confirm what pin box is on your 5th wheel trailer I can see if we have something that's compatible.
  view full answer...
• 2003 Ford F-150 5th Wheel Base Rail Kit to Fit PullRite Sliding 5th Wheel Hitch
  To add base rails to your 2003 Ford F-150 short bed I recommend the following from Curt: - Curt Custom Fifth Wheel Installation Kit # C16437-204 This includes custom brackets so you won't be drilling as much into your truck frame, and matches your PullRite as long as it's the style that installs on industry standard base rails. Please note this won't fit if your truck is a Flareside or Stepside. Then to get your PullRite hitch to fit with your pin box you'll need a capture plate. We...
  view full answer...

Do you have a question about this Accessories and Part?