bing tracking image
Customer Service My Orders
14 min
Q & A Icon

Spacer for Firestone Ride Rite Air Suspension Kit Installed on 2013 Toyota Tundra w/4 Inch Lift  

Question:

I have a 2013 tundra lifted by a 4inch block in the rear. The lift installer removed the airbags since they wouldnt work because of the gap because of the longer shock and bigger shackles. Im thinking I need a 2inch or 3inch spacer but wasnt quite sure. Would you be able to help?

0

Expert Reply:

According to my Firestone representative, you'll need to measure the existing space between the upper and lower brackets once the lift has been completed. Ideally, you'd see about 6 inches between the two brackets. If that's the case, Firestone tells me a spacer won't be needed.

If the distance between the brackets is greater than 6 inches, you'll need a spacer whose thickness is the same as the gap. For instance, if the distance between the brackets measures about 8 inches, you'd want to use the # F2366. If the distance is 9 inches, use # F2368 or if the distance is 10 inches, use # F2370.

expert reply by:
0
Mike L
Ask The Experts a Question >>

Products Referenced in This Question




Product Page this Question was Asked From


Featured Help Information

Instructions

Instructions for F2368

Miscellaneous Media

Components-Firestone-Air-Suspension-System
Components of Firestone Air Suspension Systems
the-basics-firestone
The Basics: Firestone Air-Spring Kits
The-Upgrades-Firestone-Air-Command-Kits
The Upgrades: Firestone Air Command Kits
Q & A Icon

Continue Researching

See More Q&A Expert Answers >>