Ultra-Fab 2" Motor Home Trailer Hitch Receiver for 4" x 4" Bumpers - 3,500 lbs
(220 reviews)
Price: $78.36
Ultra-Fab 2" Motor Home Trailer Hitch Receiver for 4" x 4" Bumpers - 3,500 lbs
Item # UF35-946402
Our Price: $78.36
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
In-stock alternatives that can ship today
- All Info
- Reviews (220)
- Q & A (0)
- Videos (2)
- Photos
Ultra-Fab Products RV and Camper Hitch - UF35-946402
- Bumper Mount Hitch
- 4 x 4 Inch Bumper
- 3500 lbs GTW
- Bolt-On
- 2 Inch Hitch
- 100 lbs TW
- Ultra-Fab Products
This powder coated steel receiver clamps around your RV's 4" square bumper to provide a 2" x 2" trailer hitch receiver opening. Perfect for hitch accessories or light-duty towing.
Features:
- Trailer hitch receiver clamps onto your RV's rear bumper
- Provides receiver opening for hitch-mounted accessories - such as bike racks and cargo carriers - or light-duty towing
- Heavy-duty steel construction
- Black powder coat provides excellent corrosion resistance
- Hardware and U-bolts included for installation
Specs:
- Application: 4" x 4" RV bumpers
- Receiver opening: 2" x 2"
- Maximum gross trailer weight: 3,500 lbs
- Do not exceed weight rating of your bumper
- Maximum tongue weight: 100 lbs
- 1-Year warranty
Note: For use with RV-approved accessories only.
35-946402 UltraFab Universal Hitch Adapter
Video of Ultra-Fab 2" Motor Home Trailer Hitch Receiver for 4" x 4" Bumpers - 3,500 lbs
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Ultra-Fab Products RV and Camper Hitch - RV Bumper Mount Hitch - UF35-946402
Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this Ultra-Fab two inch Motor Home Trailer Hitch Receiver for four inch by four inch steel bumpers, has a 3,500 pound gross towing weight capacity. Now, this powder coated steel hitch receiver is designed to clamp around your RV's four inch square bumper, and it provides this two inch receiver opening for your hitch mounted accessories such as bike racks, cargo carriers, or you can even use it for light towing. Now, this hitch receiver can only be mounted onto a four inch square continuous steel welded bumper, it's not designed for aluminum bumpers. This is a heavy-duty steel construction, does have a maximum gross trailer weight capacity of 3,500 pounds. Now, one note on that is you do not wanna exceed the weight rating of the bumper it attaches to, and it has a maximum tongue weight of 100 pounds.
If you noticed, if I show you the bottom of it, you can see it does have the safety loops on each side for connecting your safety chains to. We mentioned the black powder coat finish on it, provides rust and corrosion resistance, and this is a nice bolt-on installation, it includes all the mounting hardware, you can see I've pretty much installed it onto the part just to show you where it all goes, and it comes with a nice set of instructions that'll describe how it all goes together. Now, also I wanted to show you, if you look closely, right here and right at the very bottom, there's two large bolts here, these thread into the hitch receiver, and the reason those are on there is once you put your accessory in there, you tighten those down on the bottom and on the side, and it'll help reduce movement between the hitch mount and the receiver tube. Again, the application, you can see the U-bolts here, they are designed to fit four inch by four inch continuous steel welded RV bumpers. Receiver opening right up here is two inches by two inches, and one note is this is designed for use with RV approved accessories only.
Let me show you all the sides. But that should do it for the review on the Ultra-Fab two inch Motor Home Trailer Hitch Receiver for four inch by four inch steel bumpers.
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
- Defective
Customer Reviews
Ultra-Fab 2" Motor Home Trailer Hitch Receiver for 4" x 4" Bumpers - 3,500 lbs - UF35-946402
Average Customer Rating: 4.7 out of 5 stars (220 Customer Reviews)
This powder coated steel receiver clamps around your RV's 4" square bumper to provide a 2" x 2" trailer hitch receiver opening. Perfect for hitch accessories or light-duty towing.by: Mark N09/11/2018
Installed this hitch on my fifth wheel to pull my side by side to the upper peninsula in Michigan, however I would recommend that you be sure your bumper is capable of the weight being towed. I personally removed my existing bumper and welded on a much heavier steel bumper. This hitch did exactly what was expected of it, thanks so much to Kirstin for her help at checkout
by: Alan08/01/2023
hooked up hitch both u bolts broke dropping both bicycles on freeway in Montana. Just a fact and no total rack and bikes were well un der the maximum load rateing,
by: Old Woman Camping06/19/2022
Product fit perfect. Easy to install. Very happy with the hitch, Only one problem, the anti-wobble bolt on the side would not fit because U-bolt is in the way. You can only get the bottom anti-wobble bolt in. (See 2 pictures) I solved that problem by cutting off the end of the U-bolt that was in the way. They just need to move that hole back a bit more. Now I have both bolts on and cargo carrier is solid.
by: Steve Cosgriff02/26/2020
This bracket provided me the means to mount the receiver style spare tire b racket on my Class C RV. By mounting it upside down, it placed the weight squarely on the frame, leaving the u-bolts to merely hold it in place.
by: Kenneth06/04/2021
This fit very well, only problem is the side anti wobble bolt won’t fit when the U bolts are installed. Note submitted picture.
Kenneth
6/5/2022
Just ground off a 12 inch or so, installed bolt before the U bolt. Works fine now.
by: William12/06/2017
Works great used on trailer bumber for portable refrigerator to carry on cargo unit. Had to beef up bumper with angle iron due to weight ...no bounce at all with hitch
by: James DaVanzo08/26/2013
The product arrived ahead of schedule. etrailer upgraded my shipping at no extra cost! It fit on my bumper with very little problem. It was tight because of my chrome covering, but I expected that. I did have to replace two of the nuts that would screw on, and I had wanted to place it above the bumper but the body of the trailer wouldn't let me. I haven't gotten a bike carrier yet, but I wholly expect it to work just fine. I would have given it an excellent but for the bolts I had to replace.
by: Zachary08/20/2020
Cold the cargo rack on the rear of our travel trailer.I bought it so that I can lock my generator to it when we’re traveling.
by: Roger04/29/2021
This bolt on hitch worked as advertised. Important to get the bolts sufficiently tight. I used this product to hold a cargo carrier on 2020 Colorado camping trip.
by: Norman 09/07/2023
Works as advertised. Simple to attach. I use it on the back of my camper an put a generator, extra fuel and loaded cooler. Thanks for great product.
by: Scott S.10/07/2020
I needed a way to carry our mountain bikes when we go traveling with a our RV. The Ultra-Fab Hitch receiver fit perfectly on the 4x4 rear bumper allowing me to carry our bike rack. I feel I could even tow my golf cart trailer behind my RV with this hitch if needed. Very easy to install with a simple socket set and torque wrench.
by: Bryan05/29/2019
Very easy to install (my four year old helped me). We used it for our bike rack on the back of the trailer so it was installed on top of the bumper instead of underneath. This thing holds it very solid.
by: Bret07/31/2018
Product looks and feels very solid and well made. Only took me 5 mins to install. Can't wait to see how it performs as we head out in the next few days. I will be carrying my generators and gas and kids bikes on it. Thank you again etrailer.com for an easy purchase with all of the info i could ask for on your website to help make the best selection for my needs.
by: Randy 02/01/2024
the item looked and worked as advertised
by: Jesus07/29/2022
The bolts on the top are not long enough. I had to buy longer bolts. The bolt on the side that secures the hitch to reduce the movement is too long. The u-bolt is in the way. I had to buy a shorter bolt. The bolt hole needs to be repositioned so the u-bolt will not interfere.
by: Paul P.04/22/2015
Well constructed, very easy to install, negates fabricating or adapting a hitch by taking advantage of existing 4" bumper.
by: David 06/08/2023
E trailer is a consistent place I shop for fast delivery, great communication and products as described.
by: Starr08/22/2022
Will not slide properly over my 2” hitch, machined wrong, the holes for the hitched pin indent in on the hitch, will not work. This is my second try, I wish they would inspect there products before sending them out as I am stuck with no way to move.. will be asking for a full refund.very disappointed!!
David B.
9/20/2022
This is for mounting on motorhome bumpers not to mount on hitch receiver bars.
by: enduser10/08/2019
Bought (2) of them to make to make a removable rack for a small inflatable boat to carry on the back of the trailer bumper. Appears plenty strong have to see how it lasts. Did notice that the chain loops interfere with the 5/8" bent hitch pin hair pin connection. I'll have to make one out of a bolt (they should have though of that).
Victoria B.
10/24/2019
Rather than a bolt, I recommend using a straight hitch pin, such as the etrailer Trailer Hitch Lock # e98882. This hitch pin has a locking end cap to keep your hitch accessory secure. The lock core is accessed on the end of the cap, making it easier to access in a hitch with limited space like this one.
Helpful Links
by: Rich A.07/03/2013
So far it was very easy to put on the Trailer, I used it for a cargo carrier to place a 3000 Honda Generator on the carrier, work great, the next thing I'm going to try is to pull my 2 Waverunners, but I will check the weight first..
Rich A.
7/3/2014
It has worked great, but now I have changed my Trailer and do not need it anymore
by: Ron C.04/14/2017
The Ultra fab 2" RV Hitch Receiver for 4"x4" Bumpers is a very well made piece of steel. It fits our Wildwood Trailer Bumper perfectly. It is built so sturdy we have no worries about using it to haul our bicycles. It is rated at 3.5k!
Rachael H.
5/23/2017
Thanks for the review Ron, but please also keep in mind that an RV approved bike rack should be used, and please make sure the bumper is appropriately for your use.
by: Dave P03/24/2020
I mounted 2 on my camper bumper. One for a bike rack and the other for a swing away grill. Super happy w the product and the results.
Dave P.
3/24/2021
A year later, I couldn’t imagine not having the bikes and the grill on the back of the RV. Great product
by: Robert G.12/01/2017
Very sturdy attachment. Fit perfectly on the trailer bumper and hardware was 1/2" Grade 8 Cad plated--good stuff. Order was received at my driveway exactly on schedule. I would continue to do business with etrailer.
Robert G.
12/1/2018
The attachment is working great. I need to store it outside and see no physical deterioration.
by: Paul R07/14/2022
The top bolts were half inch to short. I had to go buy longer ones that cost $x.xx then only one of my hitch shanks will go far enough in to line up the holes for the pin.
Katrina B.
7/19/2022
This trailer hitch is designed to fit your RV bumper measuring at 4 inches by 4 inches. I have sent your information over to our customer service department for them to get in touch with you.
25
220
Show More Reviews
See what our Experts say about this Ultra-Fab Products RV and Camper Hitch
- Bumper-Mounted Bike Rack Recommendation for 2016 Coleman Travel Trailer with 4 Inch BumperWe have a couple of options for a bike rack that will install on the 4 inch square bumper at the back of your Coleman Travel Trailer. Since you mentioned that your camper has a spare tire already installed on the bumper, a great bike rack option for you is the Swagman Around the Spare Deluxe 2-Bike Rack # S80501. One of my co-workers uses this bike rack on his trailer to carry his family's bikes when they go camping and he really likes it. This bike rack will install around the 4 inch...
view full answer... - Trailer Hitch Options to Use a Cargo Carrier on a Jay Feather M 218 Travel TrailerWe have several different trailer hitch options that will allow you to use a cargo carrier on your Jay Feather M218 trailer. You must keep in mind that there is significantly more bouncing at the back of the trailer and because of this we recommend taking extra precautions when using a cargo carrier behind a trailer or RV. If you want to use a bumper mounted hitch like the Ultra-Fab Bumper Mount Hitch, # UF35-946402, you will first want to verify the weight capacity of your trailers bumper....
view full answer... - Hitch Bike Rack Recommendations for 4 Inch Bumper on a Travel TrailerIn my opinion the Swagman Platform-Style 2 Bike Carrier for RV Bumpers, # S64663, is the best rack for use on a 4 inch continuously welded steel RV bumper. This rack folds compactly for storage, will also work in a standard 2 inch hitch on a vehicle, and comes with the bolt on receiver for the RV bumper. This style of rack is super easy to load the bikes on and secures the bikes very well, keeping them from contacting each other or the back of the trailer causing damage. If you need to...
view full answer... - Bike Rack for a 2 Inch Bumper Mounted RV Trailer Hitch ReceiverThough the Thule Roadway, part # TH9058 is a compatible fit with the Ultra Fab 2" Bumper Receiver, part # UF35-946402, it is not recommended to be used on a trailer or RV. The distance from the rear axle to the receiver, plus the motion that the trailer has can shake apart the rack. To avoid this, you'll need to pick an RV rated rack. One of our most cost effective racks is the Let's Go Aero NEO2, part # B01748. This is a two bike hanging rack that is rated for RV use. The rack doesn't...
view full answer... - Trailer Hitch Recommendation for a Trailer that has a 84 inch Wide FrameYour trailer has a very wide frame, there are no frame mounted hitches we carry that would work for you due to that width so your best option would be a bumper mounted hitch like the # E-100 designed to fit a 4 inch square continuously welded steel bumper or the part # C19101 designed to fit a 2 inch wide by 4 inch tall bumper. This hitch is for use with RV-approved accessories only. All non-trailer loads - bike racks, cargo carriers and so forth - should be supported with stabilizing...
view full answer... - What Bike Rack do You Recommend for Transporting an E-Bike on a Truck and Travel Trailer?I have a solution for you. Any time you use any adapter like the MaxxTow Hitch Adapter # MT70032, you reduce the overall weight capacity of the hitch by 50%. With that being said, that will reduce your trailer's hitch to only 65 pounds of available tongue weight. Since the OnRamp # Y36FR already weighs 39.5 pounds, that leaves only 25.5 pounds of available tongue weight on the rack. This is extremely dangerous. We unfortunately do not recommend going this route even if you plan on further...
view full answer... - Bumper Mounted Hitch Recommendation for RV to Carry a 75 lb Spare TireThe Swagman Specialty Trailer Hitch # S64025 that you referenced has a 200 lb capacity so it would be strong enough to handle the weight of your spare tire, but it is designed only for use with bike racks so although it would seem to work for you, I cannot recommend it for you. For a similar hitch that would work for what you are trying to do you would want the part # UF35-946402 . For a spare tire carrier you would then want the # C31006 as it would also have a high enough capacity for...
view full answer... - Availability of Bumper Hitch that Can Fit 4 inch Square Bumper for Carrying GeneratorOnly the RV manufacturer will be able to tell you if the bumper is strong enough for the weight of a carrier and generator, but we have the Ultra Fab bumper hitch part # UF35-946402 which is designed for 4 inch square bumpers and has a 350 lb tongue weight rating. Assuming your bumper is rated for the weight this would fit and work well.
view full answer... - Hitch Recommendation for Pop Up Camper 4 inch Bumper to Carry Bike RackI looked up pictures of your 2009 Coleman Americana Le tent trailer and it appears to have a standard 4 inch bumper at the rear which we have the Ultra Fab bumper hitch part # UF35-946402 which would work well there and could carry an RV approved bike rack. I attached a link to a page that has all of our camper hitch approved bike racks but our I recommend the Kuat Transfer V2 # KU84FR which I attached a review video for.
view full answer... - Can Ultra-Fab 2 inch Motor Home Trailer Hitch part # UF35-946402 Install on Aluminum BumperThe trim piece you mentioned that is on your aluminum bumper is a fairly common style of bumper that the # UF35-946402 will fit on just like in the picture you referenced. You will want to check with the manufacturer of your trailer to determine if the bumper is rated for having a hitch like this installed on it. I attached a review video for this hitch for you to check out as well.
view full answer...
- What Bumper Bike Rack do You Recommend for My 2 Fat-Tire E-Bikes on My 2021 Lance Travel Trailer? I have a bike-transporting solution for you on your 2021 Lance TT 2285. Unfortunately, all of our ladder-mounted bike racks do not give you the required weight capacity for hauling your 60-pound Aventon Adventure fat tire e-bikes. With that being said, we do have a bumper-mount solution for you. In order to mount a bike rack with the required capacity to your bumper, you need the Ultra-Fab 2" Motor Home Trailer Hitch Receiver for 4" x 4" Bumpers # UF35-946402. This hitch receiver fits...
view full answer... - Installation Orientation Of Motor Home Trailer Hitch Receiver # UF35-946402The Ultra-Fab 2 inch Motor Home Trailer Hitch Receiver, part # UF35-946402, can be mounted either on the top or on the bottom of the bumper. It would depend on what you plan on using this adapter for and the clearance you would need. You will want to make sure you do not exceed the weight rating of your RV bumper. The maximum towing capacity of this hitch is 3500 lbs and the maximum tongue weight is 350 lbs. I have attached a composite photo that shows this receiver hitch installed both...
view full answer...
- RV-Rated Bike Rack Recommendations for Class A MotorhomeA hitch extension would seem to be the ideal solution for your circumstances with insufficient bike clearance at the back of your RV, but any type of extension like # C45791 will cost you half of your hitch capacity. Hitch adapters/extenders cause this loss of capacity because they change the geometry of the system, allowing for more stress to be applied to the hitch tube because the actual load is further away. A better option is an RV-rated bike rack that provides enough clearance without...
view full answer... - Recommended Motorcycle/Scooter Carrier With Hitch Receiver For MotorhomeYou do not need a bumper to add a hitch and carrier for your scooter. I recommend the Adjustable Width Trailer Hitch Receiver for RVs, 18" to 51" Wide # C13702 or the # UF35-946403 which adjusts from 47-1/8 to 77 inches. Either of these hitch receivers will mount to your motorhome frame so a bumper is not needed. This can be used with thetrailer Motorcycle Carrier for 2" Hitches - 500 lbs # e98873 for your scooter. I recommend the Motorcycle Soft Loops # 06303 along with the Erickson...
view full answer... - Recommended Parts Needed to Carry a Generator on Rear Bumper of 2017 Forest River WildwoodIf you only have the bumper at the back of your Forest River Wildwood then you will need to start off by selecting a trailer hitch receiver. You will need to measure to see if you have a 4 x 2, a 4 x 4, or a 4-1/2 x 4 inch bumper. Once you know that you can select the correct receiver for your application. For a 4 x 4 option (which is the most common) I recommend going with the Ultra-Fab 2" Motor Home Trailer Hitch Receiver # UF35-946402. This will give you a receiver with a 2 inch opening...
view full answer... - Trailer Hitch for Kodiak Trailblazer T277FS 5th Wheel TrailerWe do offer both bumper-mount and frame-mount hitches specifically intended for RV and trailer applications like your Kodiak Trailblazer 5th wheel. All are shown on the linked page. Some RV bumpers are welded securely enough to allow use of a bumper-mounted hitch like # UF35-946402. Other can use a frame-mounted hitch like # C13701 or # C13702, both of which fit frame widths from 18- to 51-inches. Either hitch can be bolted or welded on. Part # C13701 provides 2-inches of height drop for...
view full answer... - Can Ultra-Fab Motor Home Hitch # UF35-946402 Be Used To Tow a Trailer Behind a Fifth WheelThe RV hitches like the Ultra-Fab 2 Inch Motor Home Trailer Hitch, part # UF35-946402, are designed to be used on the back of an RV to haul bike racks and cargo carriers. This hitch is one of the only ones that says for light-duty towing also. It states a 350-lb maximum tongue weight capacity, but you will want to make sure not to exceed the weight capacity of your fifth wheel bumper. We do not recommend towing two trailers because the tongue weight of the second trailer will be applied...
view full answer... - Recommended Hitch for Installing Swagman Dispatch 2 Platform Rack S44FR on Travel TrailerCurt's bumper-mount hitch # E-100 will fit your trailer's 4 x 4 square bumper but since it requires a stabilizing strap # 18050 be used with a bike rack, instead I suggest the # UF35-946402 hitch from Ultra-Fab which costs less, offers the same 350-lb tongue weight (TW) capacity and does not require you to use a support strap to help hold the rack's weight. The Swagman Dispatch 2 platform rack # S44FR is an excellent choice. It will fit this hitch and provide both 6-1/2-inches of rise...
view full answer... - Bumper Mount Hitch Recommendation for RV with 4 inch Square BumperWithout knowing exactly what issues you are having with installing the # E-100 the best recommendation would be to have you check out the part # UF35-946402 as it is a U-bolt style hitch designed to fit a 4 x 4 square bumper like what you have. I attached an install video for this hitch for you to check out as well.
view full answer... - Trailer Hitch to Carry a Bike Rack on Back of TrailerNo; the only way to carry your bike rack is to mount it to your trailer's frame. The Curt Adjustable Width Trailer Hitch Receiver # 13703 will fit box frames, C-channel frames, or I-beam frames that are between 22" and 72" wide, so if your boat trailer has that this hitch can work for you. Also please keep in mind that your bike rack does need to be rated for use behind a trailer. For this I recommend checking out the Swagman Trailhead # S63381 has a 35 lb per bike weight capacity and...
view full answer... - Best Option for Bolt On Receiver and 3 Bike Rack on Rear of Jayflight Travel TrailerThe Ultra-Fab Bolt On receiver you mentioned, part # UF35-946402 would be a good choice. The receiver tube has a tongue weight capacity of 350 lbs, which means that the combined weight of the bikes plus that of the bike rack you use shouldn't exceed 350 lbs. Before installing the hitch, I'd highly recommend you consult the owner's manual or Jayco to determine if the bumper has the proper capacity. If the capacity of the bumper is lower than that of the receiver, you'll be limited to the...
view full answer... - Folding Cargo Carrier and Hitch Recommendation for RV 4 inch BumperWith an RV 4 inch bumper hitch installed like the Ultra Fab Hitch part # UF35-946402 you could install and use a folding hitch cargo carrier from Curt like the # C18151 and you'd be set.
view full answer... - Bike Rack For Carrying E-Bikes Behind a 2020 Prime Time Crusader 5TH Wheel With 4" Square BumperYes, the Swagman E-Spec Bike Rack # S94FR can be used to carry 2 E-bikes up to 70lbs each behind your 2020 Prime Time Crusader 330MBH 5th wheel camper. I recommend using the Ultra-Fab 2" Motor Home Trailer Hitch Receiver # UF35-946402 to bolt to the 4"x4" bumper on your camper. A Swagman Bike Cover # S24FR will help keep your bikes clean as large amounts of dirt are attracted to the back of the camper due to the size of it.
view full answer...
- Can an Enclosed Trailer be Towed Behind a 5th Wheel TrailerTowing one trailer behind another trailer is illegal in many places so the first thing you are going to want to do is check the laws where you will be traveling. It is also just not a good idea because it is not safe. The likelihood of jackknifing and a bad sway condition is greatly increased plus there is a lot more momentum pushing you forward. If installing a trailer hitch on the 5th wheel I strongly recommend a frame mounted hitch, not a bumper mount hitch. The bumper mount hitches...
view full answer...
Do you have a question about this RV and Camper Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
Brandon M
Expert Research:
Adam R
Expert Research:
Rachael H
Expert Research:
Jeffrey L
Written by:
Lindsey S
Video Edited:
Jacob T
Video Edited:
Zach D
Installed by:
Randy B
Updated by:
Wilson B
Updated by:
Halie H
Updated by:
Eric H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Mark N.
9/11/2019
This product has preformed as it should, no issues and I can be confident that it will withstand its purpose, thanks again