bing tracking image
  1. RV and Camper Hitch
  2. Ultra-Fab Products
  3. Bumper Mount Hitch
  4. 4 x 4 Inch Bumper
  5. Bolt-On
  6. 2 Inch Hitch
Ultra-Fab 2" Motor Home Trailer Hitch Receiver for 4" x 4" Bumpers

Ultra-Fab 2" Motor Home Trailer Hitch Receiver for 4" x 4" Bumpers

Item # UF35-946401
Retail:$68.27
Our Price: $63.23
You Save: 7%
RV and Camper Hitch
Shipping Weight: 8 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Bolt this receiver to the top of your RV's bumper to create a 2" x 2" receiver opening for bike racks and cargo carriers. Includes anti-rattle bolts for accessory receiver. Great Prices for the best rv and camper hitch from Ultra-Fab Products. Ultra-Fab 2" Motor Home Trailer Hitch Receiver for 4" x 4" Bumpers part number UF35-946401 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (393)
  • Q & A (0)
  • Photos

Ultra-Fab Products RV and Camper Hitch - UF35-946401

  • Bumper Mount Hitch
  • 4 x 4 Inch Bumper
  • Bolt-On
  • 2 Inch Hitch
  • 100 lbs TW
  • Ultra-Fab Products

Bolt this receiver to the top of your RV's bumper to create a 2" x 2" receiver opening for bike racks and cargo carriers. Includes anti-rattle bolts for accessory receiver.


Features:

  • Supplies a receiver opening at the rear of your motor home for hitch-mounted accessories like bike racks and cargo carriers
    • Do not use for towing
  • Bolts to the top of your RV's bumper
    • Zinc-plated hardware included
  • Sturdy steel construction
  • Includes anti-rattle bolts for accessory receiver


Specs:

  • Application: 4" x 4" RV bumper
  • Receiver opening: 2" x 2"
  • Plate measures 6" x 5"
  • Bolt pattern: 5" on center x 4" on center
  • Weight capacity: 100 lbs
    • Do not exceed weight rating of your bumper
  • 1-Year warranty




Notes:

  • For use with hitch-mounted, RV-approved accessories only. Not rated for towing.
  • Not for use on decorative aluminum bumper covers.


35-946401 UltraFab RV Bumper Receiver Adapter

Installation Details UF35-946401 Installation instructions



No drilling required Manufacturer Estimated Installation Time

Tech Tip

No drilling required for installation





Customer Satisfaction Score:


Customer Reviews

Ultra-Fab 2" Motor Home Trailer Hitch Receiver for 4" x 4" Bumpers - UF35-946401

Average Customer Rating:  4.7 out of 5 stars   (393 Customer Reviews)

Bolt this receiver to the top of your RV's bumper to create a 2" x 2" receiver opening for bike racks and cargo carriers. Includes anti-rattle bolts for accessory receiver.

by:

It fit the bumper perfectly but my bike rack wouldn't fit without reworking it.



by:

I ordered and received two of these hitch receivers and installed them on the rear bumper of my camper to carry my 150 cc scooter. Shipping was great and parts mounted without any problem. All hardware was included and fits perfect. Have purchased other items from etrailer previously and look forward to additional items in the future. This company is great to deal with.

Mark H.

8/24/2015

Did you end up having any problem with the weight of the scooter breaking the bolts..? I am buying 2 to do something similar...making a carrier for my generator and plan on using 2 hitches...

Bob.r

8/28/2015

No problems at all. Used it several times already and works great. I mounted them at the frame extensions.



by:

I’m using this receiver a little differently than it’s intended purpose. After getting some longer bolts and drilling holes in some aluminum angle stock, I mounted it to the tongue of our trailer. Now I have a place to store the head of our weight distribution hitch when it’s not on the truck. I just slide it into this receiver and it’s up, out of the way instead of taking up room in a storage compartment or sitting on the ground. I have a locking hitch pin I can use for added security. A simple and cheap fix.



by:

I ultimately had to return this item outside of the etrailer.com return window, but UltraFab exchanged the product with no problems. Currently using it on my rear bumper with a license plate frame holder.



by:

Fits great on the 4" bumper on our motorhome. Seems very sturdy and should work great for our 2 bike rack, without interfering with the trailer hitch.
I'd probably give it 5 stars, just haven't gotten to use it yet.



by:

I looked at several options for attaching a bike rack to my camper and this was what I wanted. I looked at several similar items on Another online retailer that had complaints about the receiver falling off because of faulty welds. I am quite certain that this product won’t come apart, in fact, you could probably pick the whole camper up by it. It is built like a tank, and is incredibly easy to install. It was more expensive than the junk on Another online retailer, but I won’t be worrying about my bikes falling off going down the road



by:

Ise this item on my travel trailer to keep my hitch out of the way,off the ground. Love it to store it so I don’t kick it on the ground.



by:

Has held up well on camper to hold bike rack and a carrier.



by:

It works great I put a bike rack on it and it is fine .



by:

I placed my order and had my part within a week. Now we can take our bikes with us wherever we go. Just moved the spare tire over and bolted the reciever right on. Thanks guys.



by:

This product was very easy to install and will be perfect for holding our bike rack. Very heavy duty for the price, excellent quality.



by:

Works great for our bike rack.



by:

This was the product I needed to store an accessory from my truck on my fifth wheel camper bumper while not in use. I actually mounted this "vertical" to store my motorcycle carrier "out of the way". I could see mounting this normally to carry light weight accessories while trailering my fifth wheel.

Bruce

8/29/2016

After a year, product is still what I wanted and doing what I needed. Actually moved to a new fifth wheel in December and brought this forward to the new camper. Very handy!



by:

I got this product our RV rear bumper to put a bike rack forour two bicycles and I'm very happy with the hitch receiver it is well made and great item that I needed to carry our bike.I highly recommend this hitch receiver.

Tony M.

10/1/2015

Great just what I wanted and needed, it was a easy installation and Im very happy with the results, thank you again for this great product I strongly recommend this product.



by:

I received this product and immediatley installed on my camper bumper, while installing I found two of the 4 lock nut would not screw on to the "U" bolts provided. I then found two of the same size nuts in my toolbox and completed the install. After inserting the bike carrier one of the "U" bolts broke off, It looks as if the "U" bolts are made of a cheap material.I had to purchase a "U" bolt from the local hardware store to replace the broken one. I don't know if I would recommend this to anyonebecause of the faulty "U" bolt.

Randy

5/22/2014

After replacing the cheap U bolts with new ones, so far the product is work well.



by:

Thank you
Received my bracket on time,
great quality, easy to install, exactly what I was looking for.
Recommend this bracket to any RV person wanting to transport bicycles. Receiver is perfect for my Yakima bike rack...

David

1/30/2019

Its Great! Thank you....



by:

Exactly what I ordered and on time. E trailer is where I go to get stuff for my camper.



by:

This product was perfect to attach to my hard shell trailer for our bike rack.
etrailer did a great job from the ordering process to delivery. Thanks for having a great process set-up to buy from you!

Jim O.

6/22/2017

Your product has worked out very well, the metal gauge thickness is very strong!



by:

Attached easily to the back of my camper and my bike rack slipped right into the receiver. Overall, a good buy that met my needs.

Frank W.

8/10/2015

Great!



by:

Very happy with the product we purchased for our RV. It fit perfect, and now we can transport our bicycles when we go camping! Now we don't have to take up space inside the RV or the back of the truck!! See attached photos.



by:

They worked great for adding a platform and toolbox onto the back of my travel trailer. I know I couldn't have fabricated and added the hardware for the price!

Rich Z.

2/19/2018

Been a year and lots of miles with bumps and potholes but the brackets have remained tight and working like they should. Thanks



by:

Hi,
I was driving back home after our
vacation and utilizing the bike rack, along with the hitch receiver, and adapter bars. 1/2 way through Nebraska, a Mustang pulled up while i was driving and yelled, "do you have a bike rack?" I said yes, and he yelled it had fallen off!

This was on interstate 80 going 70 mph. I pulled over, and the rack was gone. So we drove to the next exit and back tracked. I was just hoping nobody was hurt. About 7 miles back, we saw the bikes on the side of the road still attached to the rack. We went to the next exit, turned around, came back and gathered the bikes and real with the help of a state trooper. After looking at the rack, i could see it was still attached to the receiver i purchased, but the u bolts had snapped. 4 damaged bikes due to defective u bolts.


•••



by:

I use this trailer hitch receiver to mount my bike carrier on the bumper of my travel trailer. I carry up to four bicycles and this hitch performs beautifully. It is heavy duty and easy to install.



by:

I received this back ordered trailer hitch receiver earlier than expected. Installed it the first night. I moved the spare tire to one side and installed the receiver in the center. It installed easily. Place my bike rack on it and the receiver held two bikes real well. Wow is this going to be nice. Thanks.



by:

This is the 4th item I have purchased from etrailer, as usual a quality product at competitive price, very helpful customer service and on point shipiping, If etrailer has it I will purchase it from them

Teresa M.

2/20/2018

Have ordered several items from etrailer and all are quality items that are working the same as the day I received them.


25
392
Show More Reviews

See what our Experts say about this Ultra-Fab Products RV and Camper Hitch

  • Will Ultra-Fab Motor Home Trailer Hitch # UF35-946401 Fit a 2008 Chrysler Aspen
    The Ultra-Fab Motor Home 2-Inch Trailer Hitch, part # UF35-946401, is intended for installation on the rear of motor homes that have an exposed 4-inch bumper. Installation requires that the bumper be fully open in order to allow the U-bolts to attach securely. This hitch is not suitable for use on your 2008 Chrysler Aspen. The bumper on your vehicle is designed to protect the passengers in the event of an impact. Even if you removed part of the bumper cover to expose the bumper itself,...
    view full answer...
  • Hitch Receiver Size of Ultra-Fab 2-Inch Bumper Mount Hitch # UF35-946401
    The Ultra-Fab 2-Inch Bumper Mount Hitch, part # UF35-946401, is only available with a 2-inch receiver opening. All of the RV bumper mount hitches we carry have a 2-inch size receiver opening. We have the Brophy Hitch Reducer, part # HT02, that will reduce a 2-inch hitch to a 1-1/4 inch size, because it is a sleeve design it will not reduce the tongue weight capacity. Since you did not mention what you will be doing with the bumper mount hitch, I cannot for sure recommend the # HT02 hitch...
    view full answer...
  • What is the Weight Limit on Ultra-Fab 2 Inch Motor Home Trailer Hitch Receiver
    The Ultra-Fab Motor Home Trailer Hitch Receiver, # UF35-946401, was designed with the RV/trailer application in mind. As such the additional torque from accessories bouncing in the receiver was taken into account when the weight capacity of 200 pounds was given to the hitch. You might want to consider going with something rated a little higher, like # E-100, or # UF35-946402, which both have a 350 pound capacity, because with your intended load you will be getting close to the tongue...
    view full answer...
  • Trailer Hitch Receiver and Bike Rack for Use on 2007 Jayco Jay Feather 19H Trailer
    The best hitch type for your 2007 Jayco Jay Feather 19H Trailer will depend on its construction, specifically its bumper. I checked the Jayco website for details about its bumper but no information is offered. So, you'll just want to check your owner's manual for information and guidance related to mounting an accessory hitch. If the bumper is a 4-inch square type then you can use a bolt-on hitch like the Ultra-Fab 2-Inch Motor Home Trailer Hitch Receiver for 4 x4-Inch Bumpers, part #...
    view full answer...
  • RV Bumper Hitch Recommendation Where the Hitch Opening is Below Bumper
    I have a solution for you, but the RV Bumper 2" Trailer Hitch Receiver # S64025 that you referenced can only be used with the hitch opening on top of the bumper. Instead you would want the Ultra-Fab 2" Motor Home Trailer Hitch # UF35-946401. This hitch can be used with the opening on the bottom of the bumper. Be sure not to exceed the weight capacity of your bumper, check the owners manual of your vehicle for more info on that.
    view full answer...
  • Receiver Size of Ultra-Fab 2-Inch Bumper Mount Hitch # UF35-946401
    The Ultra-Fab 2-Inch Bumper Mount Hitch, part # UF35-946401, is only available with a 2-inch receiver opening. All of the RV bumper mount hitches will have a 2-inch size receiver opening. Trailer hitch receiver sizes are available in three different sizes, 1-1/4 inch, 2-inch, and 2-1/2 inch. The two most common sizes would be the Class I and Class II 1-1/4 inch, and the Class III and Class IV 2-inch. The Class V 2-1/2 inch size is used on heavy-duty trucks. I am including a link to a...
    view full answer...
  • Recommended Hitch Solution for Carrying Bicycle on Rear of RV with C-Channel Bumper
    The Curt # E-3S hitch you mentioned is recommended for use on a truck step bumper, as shown in the provided diagram. A bolt-on hitch like the Ultra-Fab # UF35-946401 would be a better choice. This hitch is designed to fit bumpers that are up to 4-1/2 by 4 inches. The bolt on receiver has a 200 lb capacity, but you'll need to check with the RV manufacturer to determine the capacity of the bumper. You'll need to abide by whichever capacity is lowest. I'd also recommend using a bike rack...
    view full answer...
    Image 1 for
  • Recommended Hitch Receiver and Bike Rack for Use Behind Trailer
    Starting with the hitch receiver for your trailer, if you indeed have a 4 x 4 inch bumper, the Ultra-Fab # UF35-946401 that you referenced is what I recommend. This is designed to attach to 4 inch x 4 inch square bumpers with the included hardware and U-bolts. If you are just looking to use the 2 inch receiver for hitch-mounted accessories like bike racks, this is a great option and it will work well. Moving on to the bike rack, the Kuat Beta was a really nice 2-bike hanging-style rack,...
    view full answer...
  • Recommended Trailer Hitch for a 2021 Wolfpack 5th Wheel Toy Hauler
    I can not speak to voiding a warranty, you will need to refer to your sales paperwork for that. However, the Ultra-Fab 2" Motor Home Trailer Hitch Receiver for 4" x 4" Bumpers, # UF35-946401, that you refenced is a great way to add a mounting point to the back of an RV. This allows for the addition of accessories such as a bike rack. The # UF35-946401 is made for a 4"x4" bumper and rated for 200 lb. TW. However, I suggest the Curt RV Bumper Hitch Receiver, # E-100 as it is rated for...
    view full answer...
  • Options to Maneuver a Travel Trailer for Set-Up/Parking Without Backing
    We do have a selection of bumper mounted bolt-on hitch receivers such as the Curt RV Bumper 2" Trailer Hitch Receiver # E-100 that fits a 4"x4" bumper and then provides for a 2" receiver; although this is not designed for the type of use you are describing. My suggestion is to consider the Trailer Valet XL Trailer Dolly with Chain Drive with 2" Hitch Ball, # TVXL2 or if needed, 2-5/16" ball in # TVXL25. This heavy-duty dolly with integrated drive will help you maneuver your trailer into...
    view full answer...
  • Recommendations For Carrying 2 Adult Bikes and 4 Kids Bikes On a Travel Trailer
    I have a better solution for you, the Jack-It 2 Bike Rack for A-Frame Trailers # LC429756 will attach to the front of your travel trailer using the same bolts that hold the tongue jack. This will hold 2 bikes up to 80lbs total on the front of your camper above the propane tanks. If that type of connection will not work for your trailer jack, the Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack Carrier # CC-275 will bolt to the trailers frame and allow you to use a hitch mounted bike...
    view full answer...
  • Rear Bumper Hitch Solution for 4 inch Bumper with Limited Clearance Above Bumper
    Due to the limited clearance you have above your rear bumper you'd need to install a bumper hitch that hangs below the rear bumper like the Buyers Products # 3371804060 as the # UF35-946401 needs to install above the rear bumper.
    view full answer...
  • Will the Ultra-Fab 2" Motor Home Trailer Hitch Receiver Work for Motorhome Tire Carrier
    The Ultra-Fab 2" Motor Home Trailer Hitch Receiver for 4" x 4" Bumpers part # UF35-946401 has a 200 lb weight capacity so as long as the weight of the spare tire carrier and spare wheel/tire do not exceed this you will be good. That said, you also need to take the bumper's weight capacity into consideration and abide by the lowest rated component. There isn't any reason you couldn't use this for a motorhome wheel/tire so long as you be mindful of your capacity.
    view full answer...
  • Recommended Bike Rack and Hitch Receiver for Travel Trailer Bumper
    Thanks for the photo. The Swagman Around the Spare Deluxe 2 Bike Rack for RV Bumpers # S80501 and the Swagman Platform-Style 2 Bike Rack for 2" Hitches or RV Bumpers # S64663 are great options for your 2016 Pacific Coachworks Northland Travel Trailer. The bumper has to be completely enclosed is the explanation you are likely seeking. The Tube with fully welded enclosed ends is ideal and is normal for many applications but not all. You can alternatively use the Curt RV Bumper 2" Trailer...
    view full answer...
    Image 1 for
  • Will the Ultra-Fab Motor Home Trailer Hitch Receiver in the Pictures Be the Same as What is Shipped
    Yes, what you see in the pictures for the Ultra-Fab 2" Motor Home Trailer Hitch Receiver # UF35-946401 is what will ship. There was a redesign of this product, some of the photos you are seeing in reviews may be of the previous model. We do our absolute best to keep our product photos up to date with the correct product model. It is important to note that when you use a hitch extender you will be cutting your tongue weight capacity by 50%. While Ultra-Fab may not be as well known to some,...
    view full answer...
  • Mounting Ultra Fab # UF35-946401 Under Bumper
    It is acceptable to mount the Ultra Fab # UF35-946401 underneath the bumper. Make sure the 200 lb capacity of the receiver or the capacity of the bumper (whichever is lower) is not exceeded. This receiver is meant to mount to a 4 inch Steel RV bumpers, and not to a car or truck. It is not intended to be used for towing purposes.
    view full answer...
  • Availability of 1-1/4-Inch Combo Bar for Hitch Fabrication on Antique Tractor
    I can offer you a better option for installing a 1-1/4-inch receiver tube on your antique tractor. Curt offers several lengths of their 1-1/4-inch combo bar, which is a raw steel product ready for weld-on installation. Part # E-911 is 6-inches long, part # E-912 is 12-inches long and part # C49524 is 24-inches long. One of these will cost far less than a custom-fit hitch. Also, if you used a custom hitch like the one for a Corvette any modifications would void the item's warranty, so...
    view full answer...
  • Parts Needed For Yard Ramp Build
    Making a custom ramp like this takes some unusual parts, but I think I can help. For the wheels, I recommend the Ultra-Fab Hitch Mounted Skid Wheels for RVs up to 30' Long - 4" Diameter - Qty 2 # UF48-979015. For the 2 speed manual crank jack, I recommend the Square 2-Speed Jack - Drop Leg w/ Spring Return - Sidewind - 12-3/8" Travel - 10K # TJD2SP-12000SP-F. I don't know what you mean by tow boot. I assume you want a combo bar like # E-9 or a receiver like # UF35-946401. For safety...
    view full answer...
  • Cargo Carrier For Camping Trailer Bumper Mount Capable Of Securing Cargo With Sun/Rain Protection
    It sounds like you are looking for a enclosed carrier like the GearDeck 17 # H00604 as we do not have a cover for the 24x40 etrailer Cargo Carrier # e99050. The GearDeck carrier will allow you to protect your generator and other gear from the rain and sun. You are able to Lock # 131D the lid for the carrier as well to add security to your gear. You will need a Ultra-Fab 2" Motor Home Trailer Hitch Receiver for 4" x 4" Bumpers # UF35-946401 to slide the carrier into as it is designed to...
    view full answer...
  • Recommended Bumper Hitch for a 1988 Fleetwood Yukon Wilderness with 4-1/4 x 4 Bumper
    I have a solution for you, but the Ultra-Fab 2" Motor Home Trailer Hitch Receiver part # UF35-946401 will only fit bumpers up to 4" x 4" . For your 4-1/4" x 4" bumper, I recommend the Buyers Products RV Bumper Receiver Hitch item # 337RVA24. The u-bolts will actually fit bumpers up to 4-1/2" wide so your 4-1/4" wide bumper won't be an issue. The fit will be tight enough that you would not have any play. It's perfect for a bike rack, cargo carrier, or any other cargo accessory. Keep...
    view full answer...
  • Recommendation for Bike Rack to Haul 4 Bikes on Camper Using Ultra-Fab 2
    My personal recommendation would be to use the Swagman XP 4 Bike Rack, # S64940, to haul your bikes on the camper equipped with the Ultra-Fab 2" Trailer Hitch Receiver, # UF35-946401. This heavy-duty steel carrier is loaded with features including cradles using thick, kraton vinyl cushioning and steel plates to secure the bikes to the rack, and locking knobs as a theft deterrent. Please keep in mind that although the hitch receiver has a weight capacity of 200 pounds, you will be limited...
    view full answer...
  • Bumper Hitch that Can Fit Bumper of 2011 JayFeather That's 4.5 inch by 1.5 inch
    The best solution we have is going to be the Ultra Fab hitch part # UF35-946401 which is designed to attach to a bumper that is 4.5 inches tall and 4 inches wide. Since your bumper is narrower you'd need to come up with spacers to take up the additional width. I attached an install video for this for you to check out as well.
    view full answer...
    Image 1 for
  • RV Hitch and Cargo Carrier Recommendations to Allow Transporting 190-lb Generator
    We offer two varieties of trailer hitch receivers for use on RVs, the bolt-on 4 x 4 inch-bumper-mount type such as the Ultra-Fab 2-Inch Motor Home Trailer Hitch Receiver # UF35-946401 that you referenced, and the higher-capacity multi-fit frame-mount type like the Curt # C13701. I suggest you check your RV owner's manual for any guidance or restrictions regarding the use of bumper- or frame-mount hitches and accessories. For safety and capacity I suggest a frame-mount hitch for your application. The...
    view full answer...
  • Can Curt Hitch 13703 Fit Keystone Passport SL 229 RK
    I looked up pictures of your Keystone passport SL 229RK and it looks like as long as the frame runs all the way to the back of the camper (it should) the Curt hitch # 13703 would fit and work great as it can install on standard RV frame styles that are between 22 and 72 inches.
    view full answer...


< Previous



Do you have a question about this RV and Camper Hitch?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Victoria B
Expert Research:
Victoria B
Employee Lindsey S
Written by:
Lindsey S
Employee Jacob T
Video Edited:
Jacob T
Employee Kathleen M
Installed by:
Kathleen M
Employee Randy B
Installed by:
Randy B
Employee Conner L
Installed by:
Conner L
Employee Michael B
Installed by:
Michael B
Employee Wilson B
Updated by:
Wilson B
Employee Halie H
Updated by:
Halie H
Employee Eric H
Updated by:
Eric H
Employee Zach D
Video by:
Zach D
Employee Jonathan Y
Video by:
Jonathan Y

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.