Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 7-3/4" Long - 9/16" Center Hole
(171 reviews)
Price: $16.72
In Stock
Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 7-3/4" Long - 9/16" Center Hole
Item # TREQE1
Our Price: $16.72
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (171)
- Q & A (0)
- Photos
etrailer Trailer Suspension Parts - TREQE1
- Standard Equalizer
- Camper
- Car Hauler
- Utility Trailer
- Double Eye Springs
- 7-3/4 Inch Long
- Tandem Axle
- Triple Axle
- etrailer
7-3/4" Long curved equalizer connects double-eye springs on tandem- or triple-axle trailers and allows for enough movement between the axles to keep the ride smooth and the load undisturbed. Center bolt hole is 9/16" in diameter.
Features:
- Connects double-eye springs on dual- or triple-axle trailers
- Springs attach to ends of equalizer with shackle straps (sold separately)
- Equalizer is suspended from center hanger (sold separately)
- Transfers load and sudden impacts from one axle to another by permitting movement between the axles
- Distributes weight evenly
- Results in smooth ride for trailer
- Includes bushings
Specs:
- Fits 1-3/4" wide, double-eye leaf springs with 9/16" spring eyes
- Center bolt hole diameter: 9/16"
- Dimensions:
- Distance between left and right bolt holes (center on center): 7-3/4"
- Distance between hanger bolt hole and side bolt hole (center on center): 3-7/8"
- Height of side bolt hole to hanger bolt hole: 2-7/8"
TSW EQ1 Curved Equalizer - 7-3/4" Long x 2-7/8" Tall
Replaces A2252CB and TSW 2252
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Alternate product found
Customer Reviews
Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 7-3/4" Long - 9/16" Center Hole - TREQE1
Average Customer Rating: 4.6 out of 5 stars (171 Customer Reviews)
7-3/4" Long curved equalizer connects double-eye springs on tandem- or triple-axle trailers and allows for enough movement between the axles to keep the ride smooth and the load undisturbed. Center bolt hole is 9/16" in diameter.by: John09/07/2022
Just what i needed since my original equalizers were completely worn out .
by: 04/18/2024
The bolt holes are not bored center of the lobes and are not 90 degrees to the stock. The egg shaped equalizers I am replacing have more material remaining on the thin side than the new ones I just received from etrailer. NOT HAPPY Must Resolve This Issue ASAP
by: Kenneth04/08/2024
1 star
These bushings have entirely to much slop
About .030 worth
If my original shackles weren’t busted I would have returned this rebuild kit
As for the curved equalizer 1 star as well
Much thinner castings that my “stock” original parts
And the bushing holes are machined crooked and off center
E-trailer doesn’t want comments on their shipping but my orders in the last couple years has been extremely unreliable
I will probably never use this company again
by: Mike G04/27/2024
These equalizers were needed to allow me to install new slightly shorter and heavier duty springs under my pontoon boat trailer. They are doing what they are intended to do in fine fashion.
by: David04/13/2020
I knew my shackles where worn but like most people, I put off changing them until one broke. I did buy the HD Dexter shackle kit about 6-12 months before installing it. I bought the wrong shackle kit with too small equalizers. I ordered this to get the job finished up. I only gave them a 4 star rating because they were definitely not as heavy as the Dexter units--Dexter had grease fits and bronze bushings. This unit had no grease fittings and what looked like plastic bushings.
With that said, These units worked just fine.
Hauled 5k lbs with them so far.
We will see what the test of time says.
by: Tim 02/12/2024
Easy to install if you have jacks and stand mine was on a ranger boat trailer just towed over 700 mile and I'm
Really satisfied
by: Robert03/11/2022
Direct fit and replacement. I replaced the fiber bushings with the brass ones that came with the suspension upgrade kit that I ordered with the 2 equalizers.
Robert
3/13/2023
Still quiet and holding up well.
by: John04/22/2024
Product as described and holding up well
by: Patrick 03/28/2024
Parts fit perfectly and shipping was fa st!
by: Ray C.08/01/2016
My old trailer had some play in the suspension and visibly worn parts so I just ordered every thing except for the axles them selves. Glad I did too. Here are some pics of the old parts and new.
by: Donald 03/21/2024
Excellent parts, prompt delivery and good pricing
by: Edward 04/20/2024
Looks to be a good part. Also fit just fine.
by: Brandon07/19/2022
Looks as good or better than what I had. We will see how they hold up. I paired them with a new heavy duty set of shackles . Don't think I'll have a problem for a long time now!
by: Justin12/02/2014
This product looks identical to the one that came off of my 1992 trailer. The original piece is stamped Brazil, the new one is stamped China. Time will tell how it holds up, but install was no issue.
by: Rob 11/13/2023
Perfect fit.
by: Dennis A.10/04/2013
Ordered curved equalizer, shackles, bushings, bolts with grease zerk, to fix my son-inlaws trailer and this was my first time to order from here. The order was simple and the service and updates were very prompt with my order shipping the same day and received it in 2 days.Parts looked great and fit great so I couldn't be more pleased with my order from start to finish.If someone needs trailer parts this is the place to go.Thank you etrailer for making my job easy.
Dennis A.
Dennis A.
10/8/2014
Still holding-up great with no issues.
by: Bill L05/03/2013
I worked with Laura on replacement shackles, equalizer and bolts with grease fittings. Unfortunately there wasn't a kit that had the combination of equalizer length and shackle length but Laura was very helpful in working through the options.
The products arrived on time, as promised and after the normal cussing and fussing to get the old stuff off, they fit well. The second side went much faster than the first side, go figure. . .
I was pleased with the combination of price and service. I would probably be willing to pay more for US made products but that's the only reason I didn't give the highest rating. Service was great and I recommend calling if you aren't absolutely sure you know what you need.
Bill L.
5/3/2014
The shackles and equalizers are still there and working well. One grease fitting came out of a bolt yesterday which was a bit annoying as they are just pressed in, not a threaded fitting. I may tap the bolt for a screw in fitting as the press in came out in my grease gun after greasing. Everything else has worked well.
by: Ray C.08/05/2016
High quality appears to be stronger than the original from the factory.
by: Lindsey05/13/2023
Very very cheap broke in the drive way trying to install.
Jenny N.
5/17/2023
It is unusual that it would break as that is not something that we hear. I will have our Customer Service team reach out to you.
by: Rob04/21/2016
I received the curved equalizer in 2 days, awesome fast shipping. It appears to be of good quality and after installation works as intended. Shipping prices were very reasonable.
Rob
4/22/2017
After a year still preforming well
by: Christopher03/12/2019
Not happy! Quality is very poor! Comes with nylon bushings! No grease zert! Not what I thought I was ordering! Looks like it was drilled and oversize bushings put in it to reduce down so nylon bushings would fit! I will not order any other products from etrailer!!!
Mike L.
3/13/2019
The photos in the product description show nylon bushings. The equalizer wouldnt typically have a grease zerk, youd want to use a wet bolt like # 126B2.
Helpful Links
by: James P12/21/2014
I replaced my leaf springs, shackle straps ,equalizers and wet bolts on my 2000 30' Alpenlite 5th wheel .I was very happy with your products .Everything arrived on time and in good shape .The installation took 5 hrs. with most of the time spent on removal and set up (getting the trailer 12.5 K in the air with all 4 off the ground )New parts went on in about 15 min. per side. Now I can lube the bolts & I have the clearance between the axel & frame that I was concerned about . Thanks for your help in ordering the parts. James P
by: Rich H.04/17/2017
After suffering a major incident on the highway where 3 of the 4 tires were destroyed along with the rims and some suspension parts, I needed parts fast and correct for my trailer. These wheels, along with the other suspension parts, where inexpensive, well built, accurately described, delivered quickly, and exactly what I needed to get my trailer back up and in operating condition again.
by: Bret10/05/2019
Product was exactly what I expected when I ordered. My old equalizers were only 5 and 3/4" wide and much shorter. These longer and taller equalizers will allow the springs to work in unison better due to the original placement of the front and back spring hangers. Quality seems to be very good.
by: Timothy05/08/2016
Every product I have purchased from etrailer has been exactly what it said it was a fit like it should! I have and will continue to do business with these people. Items always ship fast and arrive in a timely manner! Keep up the GREAT customer service!
25
171
Show More Reviews
See what our Experts say about this etrailer Trailer Suspension Parts
- Which Country Is Curved Equalizer TREQE1 Manufactured InWhen you say EQ-E1 I believe you are referring to the Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 7-3/4" Long - 9/16" Center Hole part # TREQE1 which is manufactured in China. We have trailer leaf suspension products from Dexter which is an US based company, but the manufacturing for these products is overseas to US specs. I have attached a link to the Dexter equalizers available.
view full answer... - Recommended Cushioned Equalizer and Wheel/Tire for Horse TrailerLooking at your photo, the axle without brakes only is offset because of the height difference with your drum assembly height versus the idler hub height because they are resting on the ground. Your straight equalizer will work fine, but you can add a curved equalizer or even a cushioned equalizer like the Dexter E-Z Flex # K71-652-00. A cushioned equalizer will give you and your horses a smoother ride. Just adding a curved equalizer like # TREQE1 will likely only put your shackle straps...
view full answer...
- Correct Replacement for Dexter 13-10 EqualizerThe correct replacement for a Dexter 13-10 Equalizer is the Triangular Equalizer part # TREQ310, not the Curved Equalizer part # TREQE1. If you want to upgrade, the Equa-Flex Cushioned Equalizers part # LC279688 would work but you might want to go with a slightly shorter shackle strap like part # TRSL200 or part # TRSL225 due to the equalizer being longer. I have attached a list of our shackle straps below as well. The upgraded equalizer is going to be a night and day difference in regards...
view full answer... - How to Torque Suspension and Equalizer Bolts when Changing Shackles on a Horse TrailerWhen replacing equalizer bolts and shackle bolts you will not use a specific torque rating for tightening the bolts. The first thing you should make sure of is that the bolts you use are long enough so that when installed you will have at least 2 threads protruding from the nut. Next, make sure that the nut you are using is a locking nut, so that it cannot work loose and fall off. Next, if the bolt you are using has knurls at the bolt head you will want to tighten the bolt down until...
view full answer... - What Information Is Needed To Replace an EqualizerIn order to find the correct replacement equalizer you will need to measure your current equalizer. The length of the new equalizer should match what you currently have or be as close as possible. This is measured from the center of the left-most eye to the center of the right-most eye. You will also want to measure the height of the equalizer. This is the height from the center of the bottom hole to the center of the top hole. For example, if you found that your length was 7-3/4" and...
view full answer...
- Equalizer Replacement Options for Dexter 13-122 EqualizerFor a standard replacement equalizer for your Dexter 13-122 equalizers you'd want the # TREQE1 or for a cushioned version you'd want the part # K71-653-00 which comes with new shackles and bolts. For a kit that includes new bolts, bushings, and nuts for use with the # TREQE1 we have the part # LC281285 which would work great as well. This is a never fail bushing setup that does not require any greasing as well.
view full answer... - Replacement Bushings for 1/2 Inner Diameter Leaf SpringsYou don't have to worry about drilling into your trailer's suspension. We have bushings that will fit the 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 25-1/8" Long item # e68SR you found that will fit your trailer. You will want the Nylon Bushing - 1/2" Inner Diameter, 11/16" Outer Diameter - 1-3/4" Long item # TRBU11506. These have an 11/16" outer diameter that will fit inside those new springs perfectly when you pop out the included bushing. You can reuse your old equalizers...
view full answer...
- Equalizers Needed for Blue Ridge Fifth Wheel TrailerWhen replacing equalizers, the length of the new equalizers needs to match that of the existing equalizers as closely as possible. The length of an equalizer is measured from center of bolt hole to center of bolt hole. Another measurement that needs to be taken into consideration is the height of the equalizer. The height of the new equilizer can be slightly different than the current height, but it should still try to be close to the existing equalizers' height. I have attached a diagram...
view full answer...
- Do Shackle Straps Need To Be The Same On Both Sides of a Trailer?It sounds like the previous owner broke something and instead of repairing the one side and changing the other they just decided to fix what was wrong. After owning the trailer for 2 years if you're not having uneven tire wearing issues and the trailer isn't lop-sided when loaded up you shouldn't have to fix anything. The shackles need to be the same on both sides of the trailer though. Like this one Curved Equalizer for 1-3/4" Wide Double-Eye Springs item # TREQE1. It is 7-3/4" Long that...
view full answer... - Diameter of Center Hole in Equalizer in APT5 Tandem Axle Trailer Hanger Kit for Double Eye SpringsThe equalizer that comes in the # APT5 Tandem-Axle Trailer Hanger Kit is part # TREQE1. This eqalizer has a 9/16 inch diameter center and end holes. The # TREQE34 equalizer comes in the hanger kit # APT3HD. The # TREQE34 does have a 3/4 inch diameter center hole and 9/16 diameter end holes. Two wet bolts are included in the # APT3HD kit for the 3/4 inch diameter center holes on the equalizers.
view full answer... - Availability Of Equalizer That Measures 7-3/4 Center To Center Of Horizontal Mounting HolesWe have exactly what you are looking for. If you are wanting a standard equalizer we have the Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 7-3/4" Long - 9/16" Center Hole # TREQE1 which would be an exact replacement. Another option would be a cushioned equalizer like the Dexter E-Z Flex Equalizers # K71-655-00 would be a great choice. Both of the options mentioned have the same 7-3/4" horizontal hole spacing center to center to match your current equalizers. I included videos...
view full answer... - How to Jack Up Trailer for Equalizer ReplacementFirst you would want to jack up the trailer frame and then use jack stands to support it so that you can lower the jack and the wheels will be off of the ground. Next you will want to slide the jack under the first axle so that you can raise it up to about where it sits normally in relation to the trailer frame. Put another jack stand on this axle and then move to the next axle and do the same.
view full answer... - Troubleshooting Trailer Leaf Spring Shackle that Faces Wrong DirectionWhen a shackle flips around and faces the wrong direction on trailer suspension most of the time just putting weight on the trailer and driving will correct the problem. Or you can try jacking up one of the axles to get the equalizer (if the trailer is a tandem), to angle and allow the shackle to flip around.
view full answer... - Determining Correct Replacement Equalizers and Shackle Straps for Older Trailer The easiest way to determine the correct replacement parts for your trailer's suspension is by simply measuring its existing components. Looking at one of your current equalizers, you will want to measure from the center of the front hole to the center of the rear hole. Then measure from the center of the top hole down to the center line between the two lower holes. One of the more popular sized equalizers is a 7-3/4 inch long unit like # TREQE1. I have attached an image with the dimensions...
view full answer...
- Height of Equalizer in Tandem Axle Hanger Kit APT5 and Replacement Shackle Straps
The center equalizer of the Tandem-Axle Trailer Hanger Kit for Double Eye Springs item # APT5 is 7-3/4 inches long (center of bolt hole to center of bolt hole) and measures 3-3/16 inches tall. The equalizer can be purchased individually item # TREQE1 it has a has a 9/16 inch center bolt hole. Unless you are wanting to replace your spring hangers I recommend purchasing the Curved Equalizer for 1-3/4" Double Eye Spring - 7-3/4" Long - 9/16" Hole item # A2252CB-GALV and the MORryde Suspension...
view full answer... - Replacement Suspension Components for Tandem Axle Trailer With 6k Dexter AxlesThank you for providing that information. What you have is a 6,000 lb Dexter axle. Based on the axle capacity and your leaf spring measurement you can use the 4-Leaf Double-Eye Spring # e47SR which measures 25-1/8" long. The slight difference in length isn't going to make a difference. For an equalizer replacement you can use the Curved Equalizer for 1-3/4" Wide Double-Eye Springs # TREQE1. This measures 7-3/4" long x 2-7/8" tall. For the rest of the components I highly recommend upgrading...
view full answer... - Recommended Hanger Spacing for 25-1/4 Inch Leaf Springs and 7-3/4 Inch EqualizerFor a tandem axle trailer that uses 25-1/4 inch long leaf springs like # e57SR and a 7-3/4 inch equalizer like the TruRyde # TREQE1, the hanger spacing should be approximately 29-1/2 inches. Keep in mind that this is simply a starting point and it's possible that you will need to adjust this dimension slightly on your trailer.
view full answer... - Are There Equalizer Kits Available with Replacement Shackles, Bolts and EqualizersSounds like you are talking about an equalizer kit like the part # K71-449-00 for a heavy duty equalizer setup or the part # AP233 for a standard duty set.
view full answer... - Replacement 7-3/4 Equalizer and Hardware for Stock TrailerI recommend upgrading to our Dexter E-Z Flex Equalizer # K71-655-00. The rubber core minimizes chucking (back-and-forth movement) and helps to absorb road shock. It is a vast improvement over the standard Equalizer # TREQE1. Be sure to check the Bushings # K71-291-00 on your leaf springs as they may need to be replaced as well. These bronze units are designed to last longer than the plastic ones that come with many springs. 2-3/4" Shackle Straps # TRSL275 9/16"x3-5/16" Wet Bolts # 126B2
view full answer... - Tandem-Axle Trailer Hanger Kit For Double-Eye Springs Without Hangers(2) 7-3/4" Long curved equalizers # TREQE1 (8) 2-5/8" Long shackle straps # 115052 (14) 3" Long x 9/16" diameter shackle bolts with locknuts # 166081 We don't have the # APT5 with the larger hangers or a kit with those specific parts without them, so I listed the parts as you asked. The 7.75 inch length is not a length we carry, they would have to be custom made. The tallest non-slipper spring hanger we carry is the # 115919 at 5-7/16 inches tall.
view full answer... - Replacement Equalizer and Hanger Recommendation to Replace EQE1For a kit that comes with the same size equalizer as the # TREQE1 that you have that also includes bushings, hangers, and a hanger bolt you'd want the # APT3HD. This also comes with shackles and everything else needed so you'd be set with just the one part number.
view full answer... - How to Determine Correct Replacement EqualizerThe Correct Track Trailer Alignment and Lift Kit - Tandem Axle # RR23QX will work to raise your trailer by 2-1/4 inches which will help with your clearance issues. As for the equalizer, to determine the correct replacement, you need to measure yours across from center to center of the bolt holes, as well as its height. For example, if your equalizer was 7-3/4" across and 2-7/8" tall you would use the Curved Equalizer # TREQE1. I have added a link below to our entire selection of equalizers...
view full answer... - Trailer Suspension Kit Recommendation for Tandem Trailer Similar to APT5 but With 4.25 inch HangersSince we don't have the exact kit you need you'd have to piece the kit together that you need. For hangers you'd want the pat # E4139 which is 4-1/4 inches tall like you mentioned needing. For 2-1/4 inch long shackle straps you'd then want the part # 18-11GALV. For the equalizers # TREQE1. And then for bolts # 126B2.
view full answer... - Can You Get etrailer Suspension Kit E99ZR without Hangers?No problem! It's not all going to be as a kit but you'll need the following part's and quantities: (2) Equalizers # TREQE1 (8) Shackle Straps # TRSL313 (14) Bolts # 166079
view full answer...
Do you have a question about this Trailer Suspension Part?
Info for this part was:
Video Edited:
Zack K
Video Edited:
Jacob T
Written by:
Lindsey S
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video by:
Kathleen M
Installed by:
Cole B
Installed by:
Randy B
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Carrie F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
John
9/8/2023
Holding up well !