Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 5-3/4" Long - 9/16" Center Hole

See what our Experts say about this TruRyde Trailer Suspension Parts

• How Do You Measure The Height Of An Equalizer?
  The height of your equalizer is measured from the center of the horizontal mounting holes, to the center of the upper mounting hole as shown as the 2" measurement in the included diagram of the # TREQ104. If you can send me this measurement, and if you are wanting a standard or cushioned equalizer I would be happy to recommend the correct replacement for you. I included a video of the # TREQ104 for you to take a look at.
  view full answer...
  
• Replacement Hangers, Equalizers, Shackle Straps and Hardware For a Trailer with 5-5/8" Equalizer
  You will need the following parts as we do not have everything you need in one kit. Front/Rear Hanger # 115918 Qty 4 Center Hanger # 28-5 Qty 2 Curved Equalizer # TREQ104 Qty 2 Shackle Strap # CE14103G Qty 8 Zinc Shackle Bolt with Locknut # TRFA73Z916DLNZ Qty 14 You can swap the hardware for the Wet Equalizer Bolt # 126B2 if you wish to have a greased set of bolts that allow the suspension to move more freely. You will need to replace the nylon bushings in your springs and equalizer...
  view full answer...
• Suspension Upgrades for Tandem 3,500 Pound Dexter Axles on a Jayco Travel Trailer
  E-Z Flex Heavy Duty Rubber Suspension System # K71-652-00 is designed for axle capacities up to 6,000 pounds. So if your measurements are close to those of this system you can use it. This system was designed to fit in place of equalizer # TREQ104 (13-104). Check your equalizers for the part number or just go by the measurements. Other option to improve the ride of the trailer is to use a shock kit such as # LC281255 for 2-3/8 inch diameter round axles or # LC281281 for 3 inch diameter...
  view full answer...
• Replacement Equalizers and Shackle Straps for 2007 Keystone Raptor 3712
  Thank you for all of that excellent information and photos! To replace the front equalizer you need the Curved Equalizer # TREQ104 and then for the rear equalizer you need the Equalizer for 1-3/4" Wide Double-Eye Springs # TREQ105. To replace your 2-3/4" long shackle straps use part # TRSL275. While you're replacing everything it would be work swapping out your bolts as well. To do this you need a 9/16" diameter bolt that's 3" long like the Redline # 126B2. If you're looking to do an...
  view full answer...
  
• Dexter E-Z Flex Suspension Kit For a 2018 Coachman Apex 250RLS Travel Trailer
  The Dexter E-Z Flex Suspension Kit # K71-652-00 is the kit I recommend for your 2018 Coachman Apex 250RLS. This kit will replace the Curved Equalizer # TREQ104 that you currently have along with all the standard bolts with wet bolts for your leaf springs. The Dexter Replacement Equalizers # K71-654-00 are the same as the equalizers you get in the above kit. These are generally used if someone already has wet bolts or their equalizers wear out over time. I recommend carrying a Grease...
  view full answer...
• Where To Measure Equalizers To Determine Correct Replacement For 2018 Kaufman Flatbed Trailer
  I would be happy to help you determine the correct replacement equalizer for your 2018 Kauffman flatbed trailer, but unfortunately we do not have a break down of the specific components your trailer uses. Instead you will need to measure your current equalizer center to center of the two horizontal mounting holes, and from the center of the upper hole to the center line of the two horizontal holes. For example the Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 5-3/4" Long - 9/16"...
  view full answer...
  
• Using Taller Equalizer to Lift Trailer After Changing to Lower Mounting Holes on Hangers
  As you mentioned in your question, we typically recommend replacing existing hangers with taller ones to ensure you get the trailer lift you are wanting. But with that being said, in your particular application, that is what you will essentially be doing since you already adjusted the front and rear hangers to the lower mounting hole. Because of this, replacing the 2 inch tall Equalizer # TREQ104 with the 4 inch tall Equalizer # TREQ310 that you referenced will indeed lift your trailer...
  view full answer...
  
• Cushioned Equalizer Kit for a Tandem Axle Trailer Trailer with 5200 Pound ALCO Axles
  You may be able to use the E-Z Flex kit # K71-652-00. This kit fits if the tandem axle spacing is 33 inches and if the equalizers are # TREQ104 or have the same measurements. The measurements can be seen in the picture I have included. The E-Z Flex equalizer will actually fit in place of 5-1/4 inch to 6-1/4 inch long equalizers.
  view full answer...
  
• What Axle Spacing will the Dexter Heavy-Duty Tandem-Axle Trailer Suspension Kit # K71-449-00 Fit
  The Dexter Heavy-Duty Tandem-Axle Trailer Suspension Kit # K71-449-00 that you referenced is designed for tandem axles with a 35 inch axle spacing and springs that are 1-3/4 inches in width. You would need to move the suspension hangers in the front and in the back on your trailer to use this kit. For an equalizer that is 5-3/4 inches from bolt hole center to bolt hole center from left to right you would want the part # TREQ104. For wet bolts you would need part # 126B2, for shackles...
  view full answer...
  
• Triple Axle Hanger/Equalizer Kit Recommendation for Use with Leaf Springs e46SR
  The closest equalizers we carry to the dimensions you mentioned are 5-3/4 inches long and 2 inches tall like the part # TREQ104. The closest triple axle kit we have is the part # APTT3 which has equalizer that are 7-3/4 inches long. I know we spoke earlier and you told me you have a mobile home triple axle trailer. Because of that I would recommend going with the # APTT3 with your springs and having the hangers moved to the appropriate dimensions that the kit calls for.
  view full answer...
• Correct Equalizer for Rvison Trailbay 31BHSS Travel Trailer
  I'm assuming that your existing equalizer is 6-1/8 inches long, measured center hole to center hole. If this is the case, we don't offer an equalizer that's 6-1/8 by 2, but we can get you really close with part # TREQ104 which is 5-3/4 inch long by 2 inches tall. The 3/8 inch shorter equalizer will slightly change the angle of your shackle links, which will actually allow a bit more suspension articulation.
  view full answer...
• Best Upgrade for EQ104 Trailer Equalizer
  Yes, the E-Z Flex Heavy Duty Rubber Suspension System part # K71-652-00 will be a direct upgrade for the EQ104 Equalizer. The part I really like about the E-Z Flex is that in addition to the cushioned equalizer upgrade which will help smooth out the ride you get much thicker shackle straps which will be more durable and it comes with wet bolts for easy maintenance. Therefore, it's more of a complete suspension upgrade in relation to other kits that simply replace the equalizer.
  view full answer...
• Equalizer Upgrade For 5-3/4 Inch Long Equalizers on Travel Trailer
  Based on your description of a 5-3/4 inch long equalizer that is very short, it is highly likely you have the Curved Equalizer # TREQ104. This is the same length, and measures 2 inches tall from bottom bolt hole to center bolt hole. The Road Armor are too tall to replace these, but we do have an option for an equalizer upgrade designed specifically to replace these equalizers: - Dexter E-Z Flex Suspension Kit # K71-652-00 The E-Z Flex # K71-652-00 is for axles with a capacity up to 6,000...
  view full answer...
• Can E-Z Flex Equalizer be Removed and Original Equalizer Put Back On
  It sounds like you want to remove the equalizer portion of the Dexter E-Z Flex Suspension Kit # K71-652-00 and replace it with your old one, which sounds like it is the Equalizer for 1-3/4" Wide Double-Eye Springs # TREQ104. To do this you will want to replace what I assume are the existing nylon bushings in your equalizer and add two of the Bronze Bushings - Qty. 4 # K71-291-00. I have added some links to videos for you to check out as well.
  view full answer...
• Can Mor/Ryde LRE Suspension Hangers Be Replaced by Dexter EZ-Flex
  To replace your current Mor Ryde LRE system and go with an EZ-Flex system is possible, but you will need to replace the center hangers as well as the equalizers to do this. To pick out the correct equalizer will require you to measure the distance between the bolt holes from left to right on your current setup so that you can get the correct EZ Flex. If the distance is between 7-1/4 and 8-1/4 inches the part # K71-653-00 would be the correct equalizer. If the distance is between 5-1/4...
  view full answer...
• Cushioned Equalizer Recommendation to Replace TREQ104 Equalizers
  Best option for a cushioned equalizer kit to replace a equalizer part # TREQ104 would be the EZ Flex part # K71-652-00 which matches closely to the dimensions you have, does an excellent job cushioning the trailer suspension and comes with wet bolts like you are looking for.
  view full answer...
• Recommended E-Z Flex Equalizers To Replace TREQ104 Equalizers For Thunderbolt Toy Hauler
  We have just what you are looking for. The replacement equalizer you can use to replace the # TREQ104 is the Dexter Equalizers for E-Z Flex Heavy Duty Rubber Suspension, part # K71-654-00. The package contains two equalizers, bolts, and nuts.
  view full answer...
• Replacement Equalizers and Wet Bolt Kit For a Tandem Axle Utility Trailer
  Your tandem axle utility trailer will likely have an equalizer like the Curved Equalizer # TREQ104. These would have been held in place by 3" Shackle Bolts # 166081 and Nylon Bushings # 721590 and Shackle Links # LC122487 on the ends of the equalizer. The best upgrade you can do is to replace the equalizer and all mounting hardware with the Dexter E-Z Flex Suspension Kit # K71-652-00. This kit has an equalizer that is designed to replace the curved equalizer with a width of 5-1/4" to...
  view full answer...
• Heavy Duty Suspension Kit for 3-1/4 Inch Shackle Straps
  Having a 1 inch difference in the length of the shackle straps would be a pretty drastic change to the amount of articulation you get out of your suspension, so going with that kit wouldn't be advisable. We don't have a kit that uses longer heavy duty shackles, so you'd need to assemble the parts separately. • You'd need two of part # K71-358-00 • Two # TREQ104 equalizers • Two of # TRFA73Z916DLNZ shoulder bolts with nuts This will provide you the same kit, but with longer shackle straps....
  view full answer...
• Will Lippert EquaFlex Equalizers Work if they are Shorter than Existing Equalizers
  The standard sized equalizers on your trailer have the same dimensions as curved equalizer # TREQ104. A great option to use in place of this equalizer is the E-Z Flex Heavy Duty Rubber Suspension System # K71-652-00 which was designed to replace equalizers with the dimensions you have. Using he EquaFlex system would throw the suspension off level some but ultimately it would not be a problem since the amount it is off is so little. You could use longer shackles to compensate or longer...
  view full answer...
• Can I Replace TREQ104 Equalizers With TREQ356 And What Difference Will It Make?
  You can replace the Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 5-3/4" Long - 9/16" Center Hole, # TREQ104, with the Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 6-1/8" Long - 9/16" Center Hole, # TREQ356. Even though you can replace these parts, moving to a longer equalizer will cause one axle to have a disproportional amount of weight on it. The smooth transfer of the impact won't be distributed as effectively which will cause a rougher ride without as good traction....
  view full answer...
• Replacement Equalizer Recommendation for the Curved Equalizer TREQ104
  To replace the standard Curved Equalizer # TREQ104 with an upgraded cushioned equalizer you need the Equa-Flex Cushioned Equalizers # LC279687. These are slightly taller than what you currently have but it will still work without any issues! Attached is a review video for you to check out as well.
  view full answer...
• Can 5-3/4 Inch Tandem Axle Equalizers be Replaced with 5-5/8 Inch Equalizers
  The Tandem-Axle Equalizer Kit, # AP233, will work as long as all other measurements are the same. Check that your shackle straps are 2-1/4 inches from center hole to center hole. The 5-3/4 inch long equalizer, # TREQ104, we carry is a direct replacement for the 5-5/8 inch long equalizer.
  view full answer...
• Improving Suspension of Tandem Axle Trailer with 3,500 lb Axles
  While we have a good option to improve the ride of your 1999 Terry Lite 5th Wheel trailer, the E-Z Flex Heavy Duty Rubber Suspension System # K71-652-00 is specifically designed for replacing Equalizer # TREQ104 and 33 inch tandem axle spacing so it isn't going to be a fit for your application. Instead, to improve the ride quality of your trailer I highly recommend the Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers - 3,500-lb Axle # RM-2450. This kit is for 3,500 lb...
  view full answer...

Do you have a question about this Trailer Suspension Part?