Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Hanger can be configured to work as either a front, center, or rear hanger on tandem- or triple-axle applications. Can be used on single-axle trailers as a front hanger only. Designed to suspend your double-eye leaf spring.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the front, center, or rear hanger for double eye springs. This hanger can be used as a front hanger on single axle applications and it can be used as a front, center, or rear hanger on tandem or triple axle applications. It's designed to fit 1 3/4 inch wide double eye springs with 9/16 inch diameter eyes. It will work with a 9/16 inch diameter bolt. Your hardware is sold separately. The units made from a sturdy steel construction that measures around 3/16 of an inch thick. It is a weld on application so it would get welded directly to the trailer frame. The holes on the top are not for a bolt on installation.
These holes are for if the installer would like to use button welds instead of or in addition to welding around the hanger. The height measurement for a hanger is taken from the center of the mount hole to the top of the hanger so for this particular unit it's going to give us a height measurement of 3 1/4 inches. The overall length of the unit edge to edge going this direction we're looking at a measurement of 3 inches. The overall height, that's going to give us a height of around 3 13/16 of an inch. When it comes to the width, measuring the external width first, that's going to measure about 2 3/8, internal width is going to measure about 1 7/8 - 1 15/16 of an inch. Then all the holes on the unit are going to have a diameter of 9/16 of an inch. That's going to do it for today's look at the front, center, or rear hanger for double eye springs..
Average Customer Rating: 4.8 out of 5 stars (135 Customer Reviews)
Hanger can be configured to work as either a front, center, or rear hanger on tandem- or triple-axle applications. Can be used on single-axle trailers as a front hanger only. Designed to suspend your double-eye leaf spring.These hangers are great for the center. They provide just enough clearance for your equalizer. Because of the length and being that I am a welder I added a support inside the hanger to keep them rigid!
Megan was very helpful with helping get this order together and communicating with parts being shipped from other locations. Thank you so very much Megan!!!!
great product and your staff was very knowledgeable and helpful I have told many friends about it and I will use your company again when needed
Good product. Fair prices. Supper fast shipping. Great service and communication.
Really like dealing with e-trailer, but am rather disappointed with the Hangers I ordered. They were smashed so hard in the die press during manufacture, that I am concerned about stress cracks. I attached 2 pics, and you can see the steel was slammed so much that it literally pinched it over a sixteenth of an inch at the base of the ears. Sad thing is, I don't have alot of time, and am forced to use them. I hope they don't break. The hangers I got in a previous kit seemed fine. I wonder why these should be different.
Very convenient ordering product
worked perfect!
GOOD AND TO SPEC
Just what I ordered and got here fast
Fantastic product. Just wish your shipping was faster
Product was high quality, arrived quickly and worked well!
I rebuilt the under carriage of my older trailer and purchased parts from etrailer. I replaced single leaf spring with their 5 leaf springs and used their heavy duty suspension kit and heavy duty hangers. Everything works great and would recommend etrailer parts to anyone. Great prices and great and friendly service.
Etrailer is always wonderful to deal with. From full suspension kits to simple hangers, i always get more than i expect.
This bracket is better than the original factory one!
Service from E trailer is outstanding. Everyone does there utmost to insure that you are more than satisfied with the product and service.
Having said that, I need to be honest about the hangers I received. I have purchased these same hangers 3 times and in each case the holes for the 9/16" bolts were drilled off of perpendicular as they should be. It is not enough to create a problem but it is clearly not the way the holes should be drilled.
I have never used these to comment. I carry them in case of a catastrophic failure, to have on hand to do a road repair.
E-Trailer always has what I need good products good service fast shipping at reasonable prices!!
The spring hangers I ordered are a fine product. I was planning to use some existing rectangle tube to make my own, but what with time constraints, I decided to order these from etrailer. I am glad I did. I couldn't have made them any nicer, I would have only burned time trying. I could have made them as good, yes. I have the tools to do so. But I could not have made them as nice as these in a short period of time. Great purchase, and it allowed me to work on other aspects of the trailer while these shipped. Shipping was quick too, all around a great deal.
I purchased the parts I needed to repair the suspension on an old Lil-Rider trailer. Knowing else had anything close to what I needed. The parts came quickly and we're exactly as advertised.
I have built several trailers in the past and I am currently building a tilt bed car trailer. I have made several purchases from etrailer.com They are great people to deal with and all of the products that I have purchased have met or exceeded my expectations. The spring hangers are well formed with no distortion and true to specifications. Highly recommend etrailer.com
As usual, etrailer does the job and faaast shipping!!!
I will use these spring brackets to move my trailer axles forward and reduce tongue weight.
Delivery was as promised and all parts were there. Great service. Raised 5th wheel 4 3/4 inches so it would be level when hooked up to 2016 Ram 2500.
Easy to install and and the trailer I rebuilt is awesome now.
Robert P.
1/21/2020
The unit is still going strong!
Great service, fantastic shipping and delivery. All pieces of the suspension repair of my tandem trailer fit perfectly! I have another trailer to repair and I will be ordering my parts from etrailer.
I ordered two trailer leaf hangers and a 10,000 trailer jack. The price was as cheap as I could find anywhere and super fast shipping! Thanks
Will be a return buyer.
Do you have a question about this Trailer Suspension Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Steven P.
10/29/2020
Still satisfied with the products I bought through etrailer! Works great!