4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 26" Long
(62 reviews)
Price: $47.99
In Stock
4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 26" Long
Item # e77SR
Our Price: $47.99
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (62)
- Q & A (0)
- Photos
etrailer Trailer Leaf Springs - e77SR
- 26 Inch Long
- Double Eye Springs
- 2000 lbs
- 4 Leaf
- 1-3/4 Inch Wide
- etrailer
- Painted
Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 2,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.
Features:
- Leaf spring acts as part of your trailer's suspension system
- Provides attachment point for your trailer's axle
- Multiple leaves allow flexibility to absorb road shock
- Allows for a smooth ride
- Reduces wear and tear on trailer
- Ensures level ride on bumpy and uneven surfaces
- Sturdy steel construction
- Nylon bushings included
- Pre-mounted hangers or aftermarket hanger kit (sold separately) required for installation
- Spring attaches to hanger mounted on trailer frame at one end
- Other end connects to shackle straps suspended from hanger or equalizer
Specs:
- Quantity: 1 leaf spring
- Spring capacity: 1,000 lbs
- Axle capacity: 2,000 lbs
- Length from center of spring eye to center of spring eye (unloaded): 26"
- Spring width: 1-3/4"
- Eye diameter with bushing: 9/16"
- Eye diameter without bushing: 11/16"
- Leaf thickness: 1/4"
- Number of leaves: 4
- Additional dimensions: see table
| Part Number | A | B | C | D |
|---|---|---|---|---|
| e77SR | 13" | 14-1/16" | 26" | 3-7/8" |
Note: To ensure proper axle alignment and suspension performance, leaf springs should always be replaced in pairs.
Leaf springs are an integral part of your trailer suspension system. The leaf springs provide the attachment points for your trailer's axle, suspending it from the frame of your trailer. Each spring flexes to absorb road shock as you travel, allowing the axle to move somewhat independently of the rest of your trailer. This helps to reduce wear and tear on the trailer and also ensures a smooth ride.
Double-eye leaf springs attach to hangers that are welded onto your trailer. One end of this spring will attach directly to the hanger with a suspension bolt. The other end will attach to shackle straps that are suspended from a hanger. These straps allow the spring to move and pivot so that it can better compensate for uneven pavement. If you have a tandem- or triple-axle trailer, the shackle straps will be attached to the equalizer that connects multiple springs.
To mount this spring, you will need hangers, shackle straps, and suspension bolts. If you are simply replacing a spring, you may still have hangers welded onto your trailer. You should, however, replace your shackle straps because they are usually the first component to wear out. You may choose to replace old suspension bolts as well. It is recommended that you replace the other leaf spring in your setup at the same time. Because springs can sag and elongate as they wear, this new spring may not exactly match the old one, and the alignment of your trailer could be affected.
If you are fabricating a trailer, you will need to purchase a hanger kit for installation. To determine the type of hanger kit that you need, you must know the specific type of leaf spring that you have, as well as your axle capacity. Depending on the hanger kits used with them, springs can be configured to work for single-, tandem- or triple-axle applications. Hangers and other suspension components can also be purchased separately if there isn't a complete kit that works for your setup.
e77SR etrailer Double Eye Trailer Leaf Spring - 4 Leaf - 1,000-lb Capacity
Compares to SP-124275
Customer Satisfaction Score:
91% were satisfied with this product
9% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 26" Long - e77SR
Average Customer Rating: 4.6 out of 5 stars (62 Customer Reviews)
Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 2,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.by: Terry03/15/2024
Perfect replacement springs for our 1967 Shasta Compact Trailer. "Daisy" will ride much nicer (and a tiny bit higher) with her new springs. After checking out all the videos and questions/answers etrailer had on leaf springs and also chatting with the folks on-line, we were confident that we had found the right leaf springs to replace our 57 year old ones.
by: Matthew04/29/2024
Product was good, customer service turned me away from being a repeat customer. I ordered the wrong part, once I realized I ordered the wrong leaf spring I called immediately after I placed the order to cancel it and order the right one and was told since I already placed an order I would have to pay a restocking fee that was about 1/2 the price of the leaf spring. I was less than 5 minutes from when I placed the order to when I called to cancel it
by: Sean01/24/2024
i was looking for some springs that were rated for 1750 to 2000 lbs each. i ordered these and when they arrived i saw the tag on each spring then tried to return them but was told i could not. that is terrible customer service !!!! i in turn ordered another set from another supplier.
by: Cascade Trailer Repair01/10/2024
These hubs save time being pre-greased witch means alot for shop production. Shipped on time as always.
by: Paul11/17/2023
Exact Fitment & higher quality than OEM. I’ve ordered replacement parts from etrailer for several years now and haven’t been disappointed yet.
by: George01/31/2024
Easy installation holding up well.
by: John 04/21/2024
Great place to deal with, they had exactly what I was looking for.
by: Randall 07/04/2023
I was in need of springs for my boat trailer and went to Etrailer first. I have purchased many items, from tow bars to trailer parts and etrailer has what I need with excellent service, parts and shipping. These springs are new and well built.
by: Steve09/02/2023
Leaf springs were great. One was missing a bushing, so they express mailed one to me right away. They are by far the best customer service of companies I deal with!
by: Robert 04/01/2024
Excellent Customer service!
by: Jared02/15/2023
This part is not descriptive enough. I ordered these for a boat trailer. Axle is 2000 lbs. The boat weighs around 1400 lbs. These springs are only rate for 1000 lbs each. To me, that should be in the description. I had to place another order and have to take off the new spring and put the new order springs on. Thanks.
Jenny N.
2/16/2023
Whoah! Hang onto those springs! For a single 2000 pound axle trailer, each spring would be rated as 1000 pounds since 2 springs are used per axle. It is extremely common with boat trailers, especially.
by: Craig 11/08/2023
Perfect. More perfect if made in USA!
by: Gerald 07/31/2023
Fit well and were in stock. Had my trailer repaired real soon
by: Michelle 07/23/2023
It worked well and was a great value.
by: 01/13/2023
Fast shipping, item a match to project from basic measurements, fits to size, quick basic installation.
by: Paul 06/29/2023
It was easy to look the part up I wanted and it was great and fast service.
by: Kendle06/05/2023
These springs fit well, the measurements were correct. They will work great!!
by: JC06/21/2023
Fast Shipping. Great Quality Product!!
by: Leonard 05/31/2023
Exactly what I needed and was easy to i nstall.
by: Nick 06/03/2023
Video is helpful came on time and fit perfect thank you
by: Joseph Kelly11/12/2022
Would have been nice if it came with ha rdware
by: Gavin 03/08/2023
Excellent customer service the young lady I talked to did a brilliant job she helped me get the right item first time I highly recommend her and you buisness
by: Terry 04/27/2023
Service is outstanding
25
62
Show More Reviews
See what our Experts say about this etrailer Trailer Leaf Springs
- Recommended Bolt On Hangers For Aluminum Frame TrailerSince you've got an aluminum frame trailer, I understand why you're looking for a bolt on solution. The only available bolt on hangers we have available would be the # CE14017G and # CE14016G but they are designed for slipper springs and not double-eye springs like # e77SR you were looking at. If you went this route you would want to use something like the # SP-040275 as your springs, which have a 3700-lbs capacity. This would be the best solution available for your new aluminum trailer,...
view full answer... - Leaf Spring Recommendation to Replace 27 inch Long Spring on Camper with 1,500 lb Trailer WeightLength-wise the leaf spring part # SP-210275 that you referenced is about right at 27 inches. Since your trailer only weighs 1,500 lbs though this is going to give you a somewhat rough ride quality. A better option would be # e77SR most likely as it has a 2,000 lb axle weight rating and is 26 inches long. I know that's an inch shorter than what you listed, but leaf springs stretch out over time as they wear out so your 27 inch springs were most likely a bit shorter when new like this spring.
view full answer... - Replacement Leaf Springs for Camper Trailer With 3,500 Pound AxleYou definitely do not want to use the # e77SR on your trailer with a 3,500 lb axle. These are rated for a 2,000 lb axle which is well under your capacity. If you need a 26" leaf spring I would not get the # e54SR since they're a bit too short. You're better off getting the # e22YR. This is rated slightly higher at 4,000 lbs but that won't be an issue for the trailer and will likely allow them to last a bit longer. These measure 26" which is what you were looking for.
view full answer... - How to Determine Replacement Leaf Springs for 1964 Travel TrailerIt looks like you're either needing the 26" Long # e77SR or the 27" Long # SP-210275. These are rated for about the same weight your looking at and they measure 1-3/4" wide. What you will want to do is take the pressure off of your leaf springs and then measure the center-to-center distance between the eyes. It is worth noting that your leaf springs may have elongated a little over time so if your leaf springs measure more like 26-1/4" then you'll want to go with the 26" leaf springs.
view full answer...
- Trailer Leaf Spring Options For 2,000 lb Trailer Axle with Idler Hubs e82GRWe do have a number of options for you to add leaf springs to go with the Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs # e82GR. The right one is going to depend on some measurements though, as there isn't a spring designed specifically for any axle. So what you will want to do is measure the length of your current spring you are replacing from the center of one spring eye to the center of the other eye, and match that as close as you can. Keep in mind there...
view full answer... - Info Needed to Pick Out Replacement Leaf Spring for 2001 Ranger Trail TrailerIf that info is available it would only be through Ranger as we don't have a way to look that up. We can help though but I would need to know the length of your current springs and the axle capacity to determine what correct fit would be. For example, the part # e77SR is a very popular length at 26 inches and is for a 2,000 lb trailer axle.
view full answer... - Recommended Suspension Components for 2014 Flagstaff MAC 206 LTD CamperTo help you with the replacement parts you need, you will need to measure your springs from eye to eye. We have the 3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 20-3/8" Long # e84SR, the 4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 26" Long # e77SR, or the 3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 23-1/2" Long # SP-113275. If you are replacing one hanger, then you will need to know the dimensions. I have attached the link to your options. If you are replacing...
view full answer...
- Correct Replacement for 26-1/2 Long Leaf SpringIt's not uncommon for new trailer leaf springs to measure shorter than the old leaf springs they are replacing. The reason for this is that leaf springs stretch as they age. Therefore, I do think the 26" long leaf spring options we offer will work for you. In order to find the right one you just need to find your axle capacity; part # e77SR for 2,000 lb, part # e22YR for 4,000 lb, or part # e94SR for 6,000 lb. For new u-bolts, we have the 2" Square Trailer U-Bolt part # SP01-160.
view full answer... - Length From Center of Spring Eye to Center of Spring Eye on 4-Leaf Double-Eye SpringThe length from the center of one spring eye to the center of the other spring eye of 4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles # e77SR is 26 inches as you can see in the accompanying diagram.
view full answer...
- Replacement 26 Inch Long Leaf Spring and U-Bolt Kit for Lightweight Square Axle TrailerWe do have some parts that will work for your application! For leaf springs you'll want to choose one of the following based off of the weight capacity: 4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - # e77SR 6-Leaf Double-Eye Spring for 4,500-lb Trailer Axles - # e27SR Then for a U-Bolt kit we have the CE Smith # CE23102 designed for 1-1/2" square axles. Attached are some videos for you to check out.
view full answer... - Replacement Double Eye Leaf Springs 26 Long For A 2003 Bass BoatI do have the perfect replacement option for your 2003 Bass Boat. For a 26" long double eye leaf spring, I recommend using the 4-Leaf Double-Eye Spring for 2,000-lb Trailer part # e77SR as long as your current leaf springs are 1-3/4" wide, these will work great for you. Our leaf springs are sold individually, therefore you will need to purchase 1 spring per side of each axle. I also recommend replacing the shackle bolts with our Shackle Bolt with Locknut for Double-Eye Springs part #...
view full answer... - Availability of 2 inch Wide Trailer Leaf SpringsThe 2 inch wide leaf springs aren't nearly as common as the 1-3/4 inch wide springs which are basically the industry standard now. We do have one 2 inch wide spring though with the part # 072-017-00 which is for a 2,000 lb axle and is 20-1/4 inches wide. If you need a different length/capacity let me know. It might be the simplest to just go with 1-3/4 inch wide spring which would require new hangers.
view full answer... - How to Pick Out 2,000 lb Axle Leaf Springs for Tandem Axle TrailerTo pick out a replacement spring you are going to need to take a few measurements. You are going to need to measure the length of the spring without any weight on it, and you are going to need to know the capacity of trailer/axles so that you pick out the correct rated spring. Once you know that info you will need to check out the link I attached that has a page with all of the double eye springs we carry. You will need to select the spring that closely matches what you currently have...
view full answer... - Can Trailer With 1-3/4 Inch, 2,000 lb Slipper Springs Change to Double Eye SpringsYes, you can change from 1-3/4 inch slipper springs to double eye springs on your trailer. You will need to have the slipper end hanger removed and have a new hanger welded on which allows the leaf spring to sit at the same height. Or you could replace all of your hangers with a brand new kit if you like, and I have added a link below to our entire selection of hangers and hanger kits for you. Then you just need the leaf spring and bolts, and for your 26-1/4 inch springs I recommend a...
view full answer... - Replacement 26 Inch Long, 2,000 lb Double Eye Leaf Springs For Pacific Boat TrailerI would love to give you a list, but the only compatible parts we have are the leaf springs and the shackle straps. I'll go ahead and list those out for you: - 4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 26" Long # e77SR - Shackle Strap - 2-1/4" Long - Galvanized # 18-11GALV The prices can be seen below.
view full answer... - Replacement For 26 Inch Long Double-Eye Trailer Leaf SpringHey Ryan, You're right that leaf springs can flatten a bit over time, but I wouldn't go with a full 1/2 inch less. Something slightly shorter (1/4 inch or so) would be better, but otherwise, I'd stick with the 26 inch springs. Just a reminder the measurements should be taken center of spring eye to center of spring eye as opposed to the full length, and while we don't have 25-7/8 inch leaf springs, we do have 26 inch springs, the 2,000 lb # e77SR, 4,000 lb # e22YR, and 6,000 lb # e94SR. You'll...
view full answer... - Replacement Trailer Suspension For Single Axle Boat TrailerFrom the looks of the photo you sent it does not look like you have an OEM suspension system on your boat trailer. I recommend securing the suspension rail to the trailer frame in a more secure manner like drilling and using bolts so that it does not shift. If you look on the frame of your trailer there should be a plate with the trailer VIN number and the axle capacities of the trailer. You will want to pick leaf springs that are as close to the axle capacity as possible. You will want...
view full answer...
- Recommended 26 Inch Leaf Springs for 1,500 or 2,000 Pound Trailer AxleWhen measuring your existing leaf springs, you will want to measure the length from the center of spring eye to the center of spring eye. If you measured a length of 26 inches, then the 4-Leaf Double-Eye Spring # e77SR should be a perfect replacement if you have a 2,000 pound axle. To confirm your axle rating, I recommend checking for a plate somewhere on the axle itself that lists its capacity. Even if you do find that your axle has a 1,500 pound capacity, this leaf spring set will still...
view full answer... - What Weight Capacity Leaf Springs Should Be Used On a Aluminum Snowmobile Trailer With 1,000LBS? You will most likely need to use a 1,000LB spring like either the Double-Eye Spring 26" # e77SR or 20-3/8" # e53SR. It is important to match the springs as close as possible to the weight of the trailer and the cargo without exceeding the weight rating for your trailer. While increasing axle weight capacity will not risk damage to the trailer you can damage the trailer by getting to light or to heavy of leaf springs. If you choose springs lighter than the trailer you will compress the springs...
view full answer... - Replacement 2,000 lb Rated Snowmobile Leaf Spring RecommendationThe leaf springs part # e77SR are actually exactly what you need. Over time old springs will stretch slightly which is why your older springs are 5/16 inches longer that these. Aside from that these match perfectly, 2k capacity and 1-3/4 inches wide.
view full answer... - Hanger Spacing Dimension Used for Leaf Spring Part # e77SRWhen you install the mounting kit part # APS1 on your trailer you will want to the hole centers of the brackets to be exactly 26 inches apart since you are using the leaf springs part # e77SR.
view full answer... - Double Eye 26 inch long 3 Leaf, Leaf Spring AvailabilityThe closest match that we currently have to the leaf spring that you are looking to replace is either part # e77SR which is rated for 2,000 lbs or part # e27SR which is rated for 4,500 lbs. They both are double eye leaf springs that are 26 inches long but they look like they fall outside of your weight range and they both have 4 leaf springs instead of 3. For a 2,500 lb 3-Leaf Double-Eye Spring we have part # e66SR which measures 25-1/8 inches on center. For a 3,500 lb 3-Leaf Double-Eye...
view full answer... - 26 inch Leaf Spring Replacement for Trailer with 2,000 lb AxleYou'd need the longer size you mentioned, do you know what capacity axle you have?
view full answer... - Availability of 26 inch Long Trailer Leaf Spring for 2,200 lb AxleWe have a 2,000 lb axle leaf spring that is 26 inches long that has 4 leafs. For that you'd want the part # e77SR which would work well as long as you don't need the additional 200 lbs of capacity that your 2,200 lb axles have.
view full answer...
Do you have a question about this Trailer Leaf Spring?
Info for this part was:
Edited by:
Lindsey S
Installed by:
Jeff D
Installed by:
Kevin C
Expert Research:
Jameson C
Video Edited:
Joshua S
Video by:
Chris R
Updated by:
Wilson B
Updated by:
Manda E
Written by:
Mike S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Katrina D.
1/25/2024
It sounds to me like you were needing part # e22YR, which is a 2,000 lbs leaf spring for a 4,000 lbs axle. I apologize for any confusion, and the fact that you were unable to return these springs.