Which Hub to Use With Dexter Trailer Axle with Spindle for L68149 Inner and L44649 Outer Bearing
Question:
Will this hub work with part #T3584F-EZ-8974. Also does this kit come with axle nuts or does the axle come with the axle nuts? Or do I buy them separate and what is the part#?
asked by: Cody
Expert Reply:
Yes. The Trailer Idler Hub Assembly # AKIHUB-655-35-EZ-K is compatible with the Dexter Trailer Axle Beam with EZ Lube Spindles # T3584F-EZ-8974 because the hub uses a # L68149 inner bearing and a # L44649 outer bearing. These hubs come with lug nuts included and the axle comes with the spindle nuts included. If you need mounting bolts to mount your axle to the leaf springs, you can use the U-bolt Kit for Mounting 3500-lbs Axles # APUBR-1.
Products Referenced in This Question
U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts
- Trailer Suspension Parts
- U-Bolt Kits
- Camper
- Car Hauler
- Utility Trailer
- 3500 lbs
- Round Axle - 2-3/8 Inch
- 1/2 Inch Diameter
- 5-1/2 Inch Long
- Dexter
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- 74 Inch Long
- 89 Inch Long
- No Drop or Lift
- Dexter
more information >
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 6 on 5-1/2 - Pre-Greased
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Video: etrailer Trailer Hubs and Drums - Hub with Integrated Drum - AKHD-655-35-EZ-K Review
- Q&A: How to Determine Hub
- Q&A: Recommended Hubs for Timbren Axle-Less With 6 on 5-1/2 Bolt Pattern For 1966 M416
- Shop: Dexter Trailer Idler Hub Assembly for 5,200-lb Axles - 6 on 5-1/2
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 6 on 5-1/2 - Pre-Greased
- Q&A: What Hubs/Drums will Fit My Dexter 4,400 Pound Axle?
- Shop: Trailer Hub and Drum Assembly - 4,400-lb E-Z Lube Axles - 10" Diameter - 6 on 5-1/2
- Shop: RV Mattress
- Shop: Goodyear Endurance ST225/75R15 Radial Tire w/ 15" Silver Modular Wheel - 6 on 5-1/2 - LR E
- Shop: Trailer Hitch
- Video: Choosing the Right Trailer Wiring
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Article: Trailer Wiring Diagrams
- Search Results: 44649
- Shop: Grease Seals 10-36 (pair)
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Trailer Wiring
- Search Results: 25580
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Video: Choosing the Right Brake Controller
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: How Many Transfer Switches are Needed to Switch from Shore Power to a Genreator, and An Inverter?
- Search Results: 68149
- Video: Lippert Solera Slider Slide-Topper Review
- Shop: Fifth Wheel Hitch
- Search Results: dust cap
- Shop: Brake Controller
- Video: Timbren Axle-Less Trailer Suspension System Installation