60 Inch Axle Compatible with 6 on 5-1/2 Inch Idler Hubs
Question:
Will Item # AKIHUB-655-35-EZ-K work with this axle? The load ratings are difderent, but the desired bolt pattern is not available in a matched rating. The trailer will be rated at the lower of the two weights.
asked by: Corey
Expert Reply:
The Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 60" Long - 2,200 lbs # T20BTR-EZ-6048 is not compatible with the Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 6 on 5-1/2 # AKIHUB-655-35-EZ-K.
If you are looking for an axle that length with a 6 on 5-1/2 bolt pattern, then you will need to use the Timbren Axle-Less System # ASR1THDS02. This will allow you the custom length when utilizing a 2 inch square bar (not included) cut to length in the integrated holes of the assemblies. This system will work with the hubs you desire and your system rating will be 2,200 lb max capacity. This system also replaces any leaf spring suspension so it is simply a bolt to frame option for custom trailer width. It can be used in tandem axle applications if desired.
Products Referenced in This Question
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ No Drop - 4 Bolt Flange - 2.2K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 2200 lbs
- Spindles Only
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 60" Long - 2,200 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 2200 lbs
- Spindles Only
- 48 Inch Long
- 60 Inch Long
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Recommended Trailer Axles and Suspension for BBQ-Smoker Trailer with Pit Weighing 3,000-3,500 lbs
- Q&A: Are the Gooseneck Hitch Balls the Same for a GM and Ram Puck System
- Q&A: Replacement Axle for Harbor Freight Trailer 4x8 Foot 1195 lb Capacity
- Q&A: How is a 4 on 4 Inch Wheel Bolt Pattern Measured
- Q&A: Cushioned Equalizer, U-Bolt Kit, and Leaf Springs for 2003 Keystone Cougar 276
- Q&A: How To Tell What Size Bearing Buddy Is Needed for My Trailer Hubs
- Article: Trailer Lighting Requirements
- Q&A: Recommended Upgraded Equalizer for Trailer with 7,000 Lb Axles and 5-3/4 Long Equalizers
- Article: Most Popular Wheel Bearings
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Trailer Wiring Diagrams
- Article: How to Measure for Trailer Hitch Drop
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Double-Eye Trailer Suspension System Review