Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This hub-and-drum assembly fits 2,200-lb E-Z Lube axles with BTR spindles. Compatible with electric and hydraulic brakes. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included.
Features:
Specs:
The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Average Customer Rating: 4.7 out of 5 stars (23 Customer Reviews)
This hub-and-drum assembly fits 2,200-lb E-Z Lube axles with BTR spindles. Compatible with electric and hydraulic brakes. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included.I upgraded my set up from Hydraulic to electric and required the new drum/hub assemblies. Nice kit.
Perfect fit for my Dexter Model 48424 axle. Assembly was straight forward.
Appears to be a good fit with the AKEBRK-2 break kit. Still have to do a test drive and confirm breaking operation. If that goes as expected this could be 5 stars.
Needed electric brakes on my Scamper pop up camper 1997, to tow with my Subaru (needs brakes over 1 000 lbs). These fit perfectly. Easy to install and a breeze when you drive.
Not even 2 years after install all rusty. Electric brake pin broke due to rust.
Impossible To remove 4 bolt holding connector due To rust. I do not recommend
Well after receiving 2 different hubs and unfortunately of course installed the correct one first about 45 minutes or less. Perfect fit and finish. etrailer took care of the wrong hub and when i received it took around 30 minutes to install that side. If you have general knowledge and just a bit of mechanic skill you can do it. Added brakes to my 2008 pop up camper, have driven this over 8000 miles (or more) now and has worked flawlessly. Highly recommend.
New hubs were shipped immediately after ordering and arrived the next day. They fit my 2004 Viking Epic 1706 perfectly. I was able to change them out in about one hour and get on the road to Florida. I re-torqued the lug nuts and checked the hub temperature at every gas fill up and they never got warmer than the tires. Drove 1000 miles in two days with no issues. Thank you etrailer for quality parts at great prices and excellent customer service.
I purchased a pair of these to replace the hubs on my 2001 Jayco popup camper w/Dexter axle. They arrived quickly and included everything but the grease. The races are already installed, which is great. These are EZ lube hubs, but the only difference I could see is the EZ lube dust cap and a different hub seal. I installed these on non-EZ lube spindles and used the bearing buddies I already had. eTrailer was great in addressing the one question I had, the price was great, and I got free shipping with my order over $150.
Essentially plug and play for my previous hubs. Great quality and fit. Would purchase again.
James
7/2/2022
Still going strong. No regrets. Would purchase again.
Worked great and went on very easy. Feels a lot better to tow a trailer with brakes!!
This is a great product for a great price. Perfect fit and easy assembly for the inexperienced. I put 5000 miles on this set immediately after install and it worked flawless with brake control.
Highly recommend etrailer products and great service.
Product delivered as ordered. Great communication throughout order process by Patrick, and order was delivered very fast. We will use etrailer.com again for future requirements. Thanks!
Fairly priced and it came one day sooner than expected. Very satisfied with the service so far. I’ll post an update when I get to try the parts I purchased.
Thank you ETRAILER!
Great quality dexter product. Was a quick and easy replacement for the worn drum on my tent trailer with a 3000lb dexter axle.
Well made, fast shipping, everything just as it should be. Thanks etrailer!
I ordered two of these. They arrived quickly and works perfectly.
Don
9/9/2019
Ive had these brakes for a year now. I am still pleased with them. Although I did have trouble with the Drivers side unit at first. I could not eliminate a squeak when applying the brakes. eTrailer worked with me to resolve the problem. They sent me a total one side replacement. I recently completed a 300 miles trip with the camper and the brakes worked perfectly. No more squeak.
Good product. I installed on my 2009 Jayco 1007 pop up and they worked. Always a plus. Received in about a week.
excellent product very happy with the s ervice
Looks great! Best price, amazing fast s hipping
Thanks
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Louise G.
5/29/2018
Thank you for asking. I am very happy with my purchase. Worked great last summer and I look forward to taking the road again with my Skamper camper and feeling secure. Have a great summer