bing tracking image
  1. Trailer Axles
  2. Dexter
  3. 2200 lbs
  4. 72 Inch Long
  5. Spindles Only
  6. No Drop or Lift
Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 72" Long - 2,200 lbs

Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 72" Long - 2,200 lbs

Item # T20BTR-EZ-7258
Our Price: $152.27
Trailer Axles
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Round trailer axle beam measures 72" from hub face to hub face (when hubs - sold separately - are mounted) and 58" from spring center to spring center. EZ-Lube spindles make it easy to lubricate bearings (sold separately). Great Prices for the best trailer axles from Dexter. Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 72" Long - 2,200 lbs part number T20BTR-EZ-7258 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (670)
  • Q & A (0)
  • Photos

Dexter Trailer Axles - T20BTR-EZ-7258

  • 2200 lbs
  • 72 Inch Long
  • Spindles Only
  • No Drop or Lift
  • 58 Inch Long
  • Leaf Spring Suspension
  • No Hubs
  • Dexter
  • Easy Lube Spindles

Round trailer axle beam measures 72" from hub face to hub face (when hubs - sold separately - are mounted) and 58" from spring center to spring center. EZ-Lube spindles make it easy to lubricate bearings (sold separately).


Features:

  • Round idler axle beam acts as part of your trailer's suspension system
    • Replace an axle on your trailer
    • Fabricate a suspension to fit your application
  • High-strength steel construction
  • Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires
    • Best for straight-line acceleration and steady, controlled towing
  • Underslung design - spring seats welded to underside of axle for mounting leaf springs (sold separately)
    • Low ride height makes it easier to load and unload your trailer
  • Straight, EZ-Lube spindles - no drop
    • Built-in grease zerk for simple lubrication
  • Spring seats and spindles are welded on
  • Limited 2-year warranty


Specs:

  • Weight capacity: 2,200 lbs
  • Hub-face-to-hub-face length: 72"
  • Spring-center-to-spring-center length: 58"
  • Tubing outer diameter: 1-3/4"
  • Spindle size: 1-1/16"


Bearing, Race, and Seal Information

  • Bearings:
    • Inner bearing: L44649
    • Outer bearing: L44649
  • Races:
    • Inner race: L44610
    • Outer race: L44610
  • Grease seal: RG06-020
    • Inner diameter: 1.5"
    • Outer diameter: 1.987"
  • Grease cap: RG04-040
    • Diameter: 1.99"

Axle Dimensions

Hub Face and Spring Center Measurements on Standard Trailer Axle

There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).


The spring center (B) is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. This axle beam comes with the spring seats welded on.


If you are replacing your trailer's axle, you should be able to figure out which type you need by determining your trailer's capacity, the bolt pattern of your wheels, the brake type and the aforementioned lengths.


Dexters

Dexters are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs (sold separately) can mount beneath the axle. The result of this underslung design is a trailer that rides a bit lower for quick and easy loading and unloading.


Each axle is manufactured to create a certain camber angle. This ensures that the angle of the wheels is correct for your towing needs. Because the primary concern when towing is maintaining controlled, in-line movement, each axle is made so that your trailer's tires will run along the pavement evenly, with contact across the width of the tread. The result is excellent straight-line acceleration for steady, in-line tracking. You might notice the bend near the center of the axle; this is what ensures the proper camber angle. Having the center ride a bit higher and the sides of the axle bent lower allows the axle to give just enough to compensate for the load.



T20BTR-7258-EZ Dexter Replacement Idler Axle Beam - Easy Lube - 72" Hub Face - 58" Spring Center - 2,200 lbs





Customer Satisfaction Score:


Customer Reviews

Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 72" Long - 2,200 lbs - T20BTR-EZ-7258

Average Customer Rating:  4.8 out of 5 stars   (668 Customer Reviews)

Round trailer axle beam measures 72" from hub face to hub face (when hubs - sold separately - are mounted) and 58" from spring center to spring center. EZ-Lube spindles make it easy to lubricate bearings (sold separately).

by:

I inherited an aluminum trailer that ended up needing a complete overhaul and etrailer was the best resource I could have found. After researching extensively to find out what I needed and watching their videos on how to do it I ended up ordering an EZ-lube axle, galvanized hubs, springs and a hanger kit (in other words everything from the frame down).
Everything shipped quickly and arrived in great shape. All the parts worked perfectly and I couldn't be happier!



by:

We install these axles on our trailers for years and they have worked well without any problems.



by:

Awesome quality! These are way better than what Wally World has on the shelf. Smooth as silk.



by:

EVERYTHING IS ON I HAVERNT USED ON A TRIP YET

Arthur W.

10/9/2023

EVERYTHING IS WORKING GREAT,,,,NO PROBLEMS.....



by:

1 yr later, axle and bearing set is working well.
I decided to replace the axle under my trailer rather than the whole trailer.
I like the pre-bend in the tube for keeping tires balanced under load as well as the basic finish rather than bare steel.
Purchase price made it even better after shopping around a bit.

Scott

1/30/2018

Doing well, as you know, the axle gets used only when the trailer does so it sits a lot. But I do enjoy that it has the pre bend to it so when loaded up it tracks true and the tire wear is even.



by:

Bought this for my boat trailer. Great looking axle took all the measurements and it looked like it would fit. When I put my hubs on it they were about one inch short. So being short there are no threads to tighten the nut against the bearing. So now I need to order there hubs. This should be mentioned when you order the axle. Or give the hub over all length.

Richard W.

11/4/2017

The axel is working great with no problems.



by:

I have ordered from your company several times and this is the first time you shipped by the post office, everything has been UPS, if this is the way you are going to ship something this long and heavy through the post office, I will have to order form some other company next time I need something. I have dealt serval times ordering fishing rods and they were shipped by the post office and every time they came in damaged in some way so I will have to really give it a lot of consideration on ordering from your company again. Very dissapointed. I guess your claim on fast shipping may be true, but fast delivery is a joke.



by:

Great axel. Blindingly fast service.



by:

Shipped fast. Product seems strong. I do have a problem (not etrailer's fault), the axle I replaced didn't have a raised leave spring mount as this one does. That extra inch put my tires into the fenders (literally) :( will have to cut fenders off and probably end up getting another axle maybe one longer so I can have boat ride between fenders instead of over them.



by:

Springs seats were missing

Etrailer Expert

Jenny N.

8/8/2022

We will have this taken care of for you. I will have our customer service team reach out.



by:

Received the axle quickly, perfect fit. Have bought from etrailer many times and will continue to do so

John N.

1/27/2021

Axle is still good after a year



by:

Axle bolted right in place and has been performing flawlessly for a year now. Great product!!!



by:

As usual, I can get parts cheaper and faster from etrailer. I don't even look for local suppliers these days. Since I discovered your excellent website and in-stock supplies, I just order and poof it appears, magic!



by:

The parts where just what we needed for our trailer Shipping was fast and no damage to parts.



by:

I am happy with the final result. The first act we ordered was a fiasco. UPS says that USPS Employee signed for it but they don't except oversize packages and mine was 72" long. We hope that ups retired the first one to you because we would like a credit for it Thank you for your extra effort on our behalf.



by:

The Axle fit perfectly and was a great deal! Everyone was great and even expedited the shipping up to Alaska. Will definitely be ordering parts from here in the future



by:

I now have 9780+ miles on my trailer. This item has held up to the task.



by:

Helpful staff...quality products...fast shipping competitive pricing..etrailer recommended..that's why I am a repeat customer



by:

Exactly what I needed. Came with all the parts necessary.



by:

Axle is what I expected at a good price I will be back for more parts in the future



by:

Best axle i have every seen. No need for bearing buddies anymore.



by:

The right part showed up on time. Thank you etrailer.com!



by:

Fast shipping, axle worded good



by:

Excellent customer service easy return and exchange



by:

Arrive quickly, was exactly what I ordered and seems to be great quality


25
668
Show More Reviews

See what our Experts say about this Dexter Trailer Axles

  • Recommended Idler Hubs For Dexter 2200lb Trailer Idler Axle Beam with EZ-Lube Spindles
    We have exactly what you are looking for. To add hubs with the 5 on 4-1/2 bolt pattern to your Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 72 Long - 2,200 lbs Item # T20BTR-EZ-7258 you will need two of the Dexter Trailer Idler Hub Assembly for 2,200-lb Axles # 8-258-5UC1 which includes inner and outer bearing # L44649, races # L44610, grease seal # 10-9, grease cap, wheel bolts, and lug nuts. This will make your axle exactly like the Dexter Trailer Idler Axle w/ Hubs - EZ-Lube...
    view full answer...
  • Recommendations For Replacing A 1-1/2 Inch Grease Cap?
    The smallest option we have for something like this will be the etrailer.com Bearing Protectors w/ Covers # e99004. However, these are designed to fit a hub bore of 1.78" and will be much too large for your hubs. Having a hub bore of 1-1/2" is going to be very uncommon and, unfortunately, we will not have anything quite small enough to fit. What you may want to do is replace the hubs with something that has a more common hub bore. The Bearing Buddies # BB1980A will fit the Easy Grease...
    view full answer...
  • Recommended Axle Upgrade For Vintage Trailer
    Based on the picture you provided you are actually measuring from the inside of the drum to the inside of the drum, and not to the actual hub face. Since you are getting 62" inside to inside you are actually probably closer to 72" hub face to hub face. The closest standard axle we have to that length is the Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 72" Long - 2,200 lbs # T20BTR-EZ-7258 which has a hub face to hub face measurement of 72" and a spring center to spring center...
    view full answer...
    Image 1 for
  • Replacement Axle Kit for Custom 5 x 8 Trailer that Has 60-Inch Spring Centers
    All of the axles and axle kits we offer use standard spring center spacing of 48-, 58- or 74-inches, such as the Dexter # T20BTR-EZ-7258 which has 58-inch spring centers. The link at right will let you see the entire category. Filters in the left margin let you sort the results. The exceptions are universal-fit axle-less suspension systems from Timbren, such as their # A35RS545 which is rated for 3500-lbs. Timbren axle-less systems fit any frame width and bolt or weld into place. These...
    view full answer...
  • Can Hubs from Old Axle Be Used With Dexter # T20BTR-EZ-7258 Replacement Trailer Axle
    If your existing hub assemblies use the # L44649 inner and outer wheel bearing, hubs and races are still in good condition, you can reuse them. I'd recommend replacing the bearings and # L44610 races. I wouldn't recommend trying to bend the axle back into place. When the axle was bent, the structural integrity of the metal might have been compromised to an unknown degree. Be safe, replace the axle. The axle has a hub face to hub face dimension of 72 inches and a spring center to spring...
    view full answer...
    Image 1 for
  • Determining Which Axle For Custom Tear Camper Weighing Up To 1500lbs
    I would be happy to help! There are a few different options here, with one being a standard axle and one being an axle-less option. For a standard axle I recommend the Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 72" Long - 2,200 lbs # T20BTR-EZ-7258 which has a 2200lb rating which will give you plenty of capacity for what you are needing, though since your frame is 59-1/2" wide you will need to cut off the included spring seats and weld two of the # TRSS175 in the correct location. You...
    view full answer...
  • Timbren Axle-Less System for a 6 on 5-1/2 inch Idler Hub
    I have a solution for you but the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 6 on 5-1/2 - Pre-Greased item # AKIHUB-655-35-EZ-K you referenced does not fit the Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 72" Long - 2,200 lbs item # T20BTR-EZ-7258. To use an idler hub that large you're going to need the Timbren Axle-Less Trailer Suspension System - Straight Spindle Only - 3,500 lbs item # ASR3500S05. All the 72" axle spindles are too small for 6 on 5-1/2" hubs. With...
    view full answer...
  • Recommended Replacement Axle And Brakes For Popup Camper
    The axle you need for your popup camper will depend on the width of the camper. If possible, I recommend an axle that comes with the brakes and hubs already installed. This would cut down on a lot of work and hassle piecing a system together. I have attached a helpful article that explains what is needed to add electric brakes to an axle you can check out. when considering new axles and hubs you will want to make sure they match the bolt pattern of the wheels you have. I have attached...
    view full answer...
    Image 1 for
  • Shipping Weight of Dexter Trailer Axle T20BTR-EZ-7258
    Dexter Trailer Axle # T20BTR-EZ-7258 has a shipping weight 22-lbs. Its actual rated weight-carrying capacity is 2200-lbs. It could be used with leaf springs such as # e84SR, a pair of which is rated for 2000-lbs.
    view full answer...
  • What Info Is Needed to Pick Out 2,200 lb Trailer Axle for 2000 Viking 2107 ST Pop Up Camper
    The correct info needed to pick out a trailer axle is the capacity, the distance from hub face to hub face, and the distance between the spring seat centers. For example the 2,200 lb trailer axle part # T20BTR-EZ-7258 has a distance of 72 inches from hub face to hub face and 58 inches between the spring seats and the 2,200 lb part # e43GR has a distance of 60 inches from hub face to hub face and 48 inches between spring seat centers. These are only two options we have for the 2,200 lb...
    view full answer...
  • Replacing A Dexter Axle Rated At 3,500 Lbs With HF Measurement of 73 And SC Measurement Of 58
    I do have some options for you. We do have an axle rated at 2,200 lbs with a hub face to hub face measurement of 72" and a spring center to spring center measurement of 58". It is the Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 72" Long - 2,200 lbs, part # T20BTR-EZ-7258. This is the closest axle we have to the measurements you need. Unfortunately, I do not have a 3,500 lbs axle with these dimensions. A better choice would be to go with a Timbren axle-less system. The Timbren...
    view full answer...
  • Replacement Trailer Spindle for L44643 Inner and Outer Bearings
    A spindle that uses both inner and outer bearing L44643 makes it a BT8 spindle, # TRU94FR. Please note that welding on new spindles is a precision job and should performed by a qualified welder with experience welding on spindles. The alternative is to replace the axle. Axles are measured from hub face to hub face and from spring seat center to spring seat center. For example, the picture I have included is for axle # T20BTR-EZ-7258.
    view full answer...
    Image 1 for
  • Are There Hubs with 4x100 Bolt Pattern to Fit Dexter 2,200 Pound EZ-Lube Axle
    The Dexter Trailer Idler Axle Beam # T20BTR-EZ-7258 that you referenced will match up to 2,200 or 2,000 pound hubs like the Dexter # 8-91-05UC1-EZ, which features a 4 on 4" bolt pattern. We do not have any 4x100 bolt pattern hubs available at all, as this isn't a very common pattern anymore. You may be able to source compatible hubs with this bolt pattern locally through a trailer shop or re-seller, but you will need to make sure they use the right inner and outer bearings. The spindles...
    view full answer...
  • 2,200 lb Axle Measuring 72 Inches Between Hub Face, Brake Flange, Hub, and Electric Brakes
    We do have all the parts you need, though the axles with that size don't come with the brake flange mounted, so you will need to have them welded on. Also, there isn't a hub with a 5 on 4-1/2" bolt pattern that will fit this spindle though, only a 4 on 4" bolt pattern. So for the 2,200 lb axle that measures 72" hub face to hub face & spring seat to spring seat, brake mounting flange, hubs, and electric brakes, these are the exact parts you need. - Dexter Trailer Idler Axle Beam with EZ-Lube...
    view full answer...
  • Dexter P-15 SLR Axle SN D4484069 Weight Capacity and Replacement Axle
    I spoke with my rep at Dexter axle and was informed your axle has a 3,500 lbs weight capacity, with a 58" spring center, and a 72" hub face. A comparable replacement is the Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 72" Long item # T20BTR-EZ-7258. This axle has a 2,200 lbs weight capacity and measures 72" from hub face to hub face when hubs are mounted and 58" from spring center to spring center. If you would like to message me your hub requirements I would be glad to make a...
    view full answer...
  • Can the Spring Seats On a Dexter 2,200 Lb Axle Be Moved and Re-Welded
    Yes, you can move the spring seats to 53-1/2" apart on the Dexter 2,200 Lb Trailer Axle part # T20BTR-EZ-7258, or part # 20545I-EZ-72-10. This is pretty common practice as manufactures just place the spring seats in a common spot but the customers can move them as needed. That said, you will likely destroy the old ones getting them off so I also recommend getting the Axle Spring Seat part # TRSS175 (2).
    view full answer...
  • Is Dexter Trailer Idler Axle Beam with EZ-Lube Spindles Available
    While we do not have any axles with those measurements, we have one that is close, the Dexter Trailer Idler Axle Beam with EZ-Lube Spindles # T20BTR-EZ-7258 which has a hub-face-to-hub-face length of 72" and spring-center-to-spring-center length of 58". You can find the prices of all products directly on the product page.
    view full answer...
  • Troubleshooting Norther Tool Ultra-Tow Aluminum 5' x 8' Trailer Wearing Inside Edge Of Tires
    Based on the way the tires are rated, it sounds like the axle was over loaded, but I would imagine it has an axle rating of higher than 800lbs. Is there any chance your flipped the axle to get the axle underneath the springs to lift it, but did not weld on new spring seats? That is typically the only time we see this kind of wear, as axles have an arch in them which becomes straight when loaded, but if the axle is flipped and new spring seats are not welded on then the arch will be pointing...
    view full answer...
    Image 1 for
  • Can Replacement Trailer Axle with Smaller Diameter be Used on a Boat Trailer
    If the axle is bent up in the middle then that is normal. Trailer axles have a bow in them so that when weight is placed on the trailer it flattens out. That is part of what gives an axle its capacity. If there is not enough weight on the axle then the tires will remain toe in at the bottoms and you will get tread wear just on the outsides of the tread. If the axle is bent in some other way then replacing the axle is a good idea. The diameter difference means that you would likely have...
    view full answer...
  • What is the Capacity of the Axle in Dexter Trailer Axle Kit with Idler Hubs 20545I-EZ-72-15
    For trailer axle # 20545I-EZ-72-15 the axle itself is rated for 2,200 pounds. The axle alone is # T20BTR-EZ-7258. The hubs that are included with # 20545I-EZ-72-15 are rated for 2,000 pound axles so since they are lower than the axle itself the rating for that whole system is 2,000 pounds. If you need a 2,200 pound set up you would use axle # T20BTR-EZ-7258 and 2 of hub # 8-258-50UC1-EZ.
    view full answer...
  • Do Hubs Come Pre-Installed on Dexter 2,200 Pound Trailer Axles
    We do have a 72 inch, 2,200 pound trailer axle with hubs, # 20545I-EZ-72-10, but the hubs are not pre-installed. Everything is included (bearings, seals, races (the races already pressed in), grease caps, and lug nuts) just not pre-mounted. I have included a link to a video showing an example installation of this axle for you. This axle has hubs with a 5 on 4-1/2 bolt pattern. It is also available with a 4 on 4 bolt pattern # 20440I-EZ-72 with a 2,000 lb capacity.
    view full answer...
  • Is There a 72 Inch Long Trailer Axle with 4-Bolt Brake Mounting Flange
    I do have an option for you as we carry axles with the exact dimensions you provided, that being said these axles all have either a 2,000 lb (BT8) or 2,200 lb (BTR) spindle with no brake flange which is common for these dimensions. The Dexter Trailer Axle Beam part # T20BTR-7258 for 2,000 lb or part # T20BTR-EZ-7258 for 2,200 lb are what I recommend. If you need a brake mounting flange then one would have to be added using the Brake Mounting Flange part # 4-34. I have attached a full list...
    view full answer...
  • Upgrading Agricultural Spindle or Axle for 5 on 4-1/2 Inch Bolt Pattern Hub Assembly
    Unfortunately the 0.69 inch measurement of the LM11749 is not a bearing we carry. Your trailer has a unique agricultural spindle that we don't have the replacement bearing or compatible hub for. Your best option is to replace the axle or at least the spindle with the BTR E-Z Lube Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter # TRU44FR. This will be compatible with the Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Galvanized # 8-258-50UC1 you referenced....
    view full answer...
    Image 1 for
  • Hub Recommendation for Dexter Trailer Axle part # T20BTR-EZ-7258
    The Dexter Trailer Idler Axle Beam with EZ-Lube Spindles # T20BTR-EZ-7258 that you referenced has a BTR spindle on it that takes a hub with an inner and outer bearing of L44649. This would not work with your hubs because they have inner bearing of L68149 and an outer bearing of L44649. To use the axle you referenced you would need to go with the Trailer Hub Assembly # 8-258-5UC1 instead. At 72 inches in length there are no axles we carry that would fit the hubs you have.
    view full answer...


< Previous



Do you have a question about this Trailer Axle?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Lindsey S
Written by:
Lindsey S
Employee DeAnne T
Updated by:
DeAnne T
Employee Adele M
Updated by:
Adele M
Employee Laura H
Updated by:
Laura H
Employee Rachael H
Updated by:
Rachael H
Employee Wilson B
Updated by:
Wilson B
Employee Mike S
Updated by:
Mike S
Employee Jeff D
Installed by:
Jeff D
Employee Randy B
Installed by:
Randy B
Employee Kathleen M
Video by:
Kathleen M
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.