bing tracking image
  1. A-Frame Trailer Coupler
  2. etrailer
  3. 2 Inch Ball Coupler
  4. Weld-On
  5. 8000 lbs GTW
  6. Standard Coupler
A-Frame Trailer Coupler - Yoke Latch - Black - 2" Ball - Weld On - 8,000 lbs

A-Frame Trailer Coupler - Yoke Latch - Black - 2" Ball - Weld On - 8,000 lbs

Item # CA-5210-B
Our Price: $46.19
A-Frame Trailer Coupler
Shipping Weight: 8 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
A-frame coupler features a wraparound yoke latch that catches to remain open while you position coupler over ball. Black powder coat finish provides strength and durability. 1-800-940-8924 to order etrailer a-frame trailer coupler part number CA-5210-B or order online at etrailer.com. Free expert support on all etrailer products. Great prices and Fastest Shipping for A-Frame Trailer Coupler - Yoke Latch - Black - 2" Ball - Weld On - 8,000 lbs. A-Frame Trailer Coupler reviews from real customers.
  • All Info
  • Reviews (190)
  • Q & A (0)
  • Photos

etrailer A-Frame Trailer Coupler - CA-5210-B

  • 2 Inch Ball Coupler
  • Weld-On
  • 8000 lbs GTW
  • Standard Coupler
  • etrailer
  • Yoke Latch

A-frame coupler features a wraparound yoke latch that catches to remain open while you position coupler over ball. Black powder coat finish provides strength and durability.


Features:

  • A-frame coupler lets you hook up your trailer to your tow vehicle
    • Provides connection point for hitch ball
  • Yoke latch makes it easy to clamp around ball
    • Lift up and back on the latch to open
    • Push forward and down to close
  • Sturdy steel construction
  • Black powder coat finish provides corrosion resistance
  • Built-in jack-attachment point allows for quick, easy mounting of round utility jack
  • SAE J684 certified
  • Weld-on installation


Specs:

  • Ball size: 2"
  • Jack hole diameter: 2-1/4"
  • Overall dimensions: 13-3/4" long x 9-1/2" wide
  • Pin hole diameter: 5/16"
    • Minimum span needed for pin or pin lock: 1-1/4"
  • Weight capacity: 8,000 lbs
  • 1-Year warranty


CA-5210-B Ram A-Frame Trailer Coupler - Yoke Latch - 2" Ball - Black - 8,000 lbs





Customer Satisfaction Score:


Customer Reviews

A-Frame Trailer Coupler - Yoke Latch - Black - 2" Ball - Weld On - 8,000 lbs - CA-5210-B

Average Customer Rating:  4.8 out of 5 stars   (190 Customer Reviews)

A-frame coupler features a wraparound yoke latch that catches to remain open while you position coupler over ball. Black powder coat finish provides strength and durability.

by:

We got it welded on and it latches fine. It's really hard to get it to unlock though. Sometimes it requires a few hits from a rubber mallet. I wish there had been a way to tell this before we installed it. Maybe we got a lemon but I wouldn't recommend this coupler.



by:

Had a buddy weld this on my two axle car hauler and it worked out beautifully!!



by:

The sales person was great to work with she was very helpful looking up all the information on the product I was looking for. The order was shipped very fast even with it being during the holidays. Good work Britt



by:

Heavy built and should work well for the new trailer



by:

Great product. Very well built. Excellent shipping.



by:

I have purchased many parts from etrailer and always have had a great experience with both parts and service



by:

Happy with the product and prompt service! Thanks you.



by:

Haven’t installed it yet, but it’s an identical replacement for the original hitch on our Escape 19.



by:

Product appears to be durable and was here in a couple days.



by:

great hook up safe and easey to use thanks e trailer



by:

After 25 years the trailer coupler started cracking. This one is exactly like the one Big Tex use on my trailer when it was new. I hope this one lasts 25 years.



by:

The coupler works and fit great on my old dump trailer. It was delivered on time. I would order again from etrailer.



by:

Got it installed seems to work fine time will tell. If it were USA made would have been nice.



by:

It is a easy coupler to both weld in place and operate the mechanism. I put it on as a replacement coupler, I use the trailer to haul a 5000# Bobcat tractor.



by:

Products are great. Service is excellen t.



by:

Always great service and prompt delivery



by: 11/02/2022

Good hitch



by:

I’m very happy. Order was shipped out same day. Thanks



by:

Ordered the 8 thousand pound hitch delivery was quick had to wait a couple of weeks to fix looks great. Thanks



by:

Updated an old trailer, excellent value, easy to mount. The safety relief works really well. Very happy with the purchase and etrailer.com is a great vendor with very large selection of products, and great service. have used many times and will continue

Joe

8/29/2019

Continues to work well, well made, strong, great price, great vendor. Will continue to use and recommend Etrailer for all thngs trailer



by:

Looks good, received it pretty fast! I haven't installed it yet but it's just what I wanted, Thank You !!!



by:

Worked great for our repurposed trailer.



by:

I can't exactly answer honestly what I think of it because after year I still haven't had put on the trailer it's a lot heavier in sturdier than I expected Shipping with quick and on time that is far as product I haven't put on the trailer yet

Daniel B.

4/24/2022

well long story short its still in the box in my garage never got the chance to put it on because somebody stole the trailer



by:

Excellent coupler for my homemade rig. Welded up nicely!



by:

I had bought a trailer that the hitch was messed up on. I got a great deal on it because the guy who had it didn't want to fool with replacing the damaged one since it was an A-frame style and he was thinking it would be hard to replace. I got online and found etrailer.com. They had quality products at great prices so I chose to order from them. I received the hitch quickly and it was exactly what I wanted. It was really simple to put on my trailer and so far everything has performed excellent. I would highly recommend etrailer.com products. I'll definitely be ordering more products as I need them from etrailer.com.


25
190
Show More Reviews

See what our Experts say about this etrailer A-Frame Trailer Coupler

  • What Size Jack Tube Fits A-Frame Trailer Coupler CA-5210-B
    If you are talking about the hole for a jack on A-Frame coupler # CA-5210-B you will want a jack with a 2-1/4 inch outer tube diameter. This coupler also has holes for a bolt on jack if you would rather go that way. For either style though you will want a 2-1/4 inch outer tube.
    view full answer...
  • A-Frame Coupler That Accepts 2 Inch Hitch Ball
    Thanks for the photos, and I can confirm that you do have an A-frame style of coupler. We do not have a latch repair kit by that manufacturer for an A-frame coupler for a 2 inch hitch ball, so the best we can offer is a new A-frame coupler. There are both bolt-on and weld-on options available. - Bolt-On: Demco A-Frame Trailer Coupler with Jack Hole - eZ-Latch # DM14793-81 - Weld-On: A-Frame Trailer Coupler - Yoke Latch # CA-5210-B I have added links below to some video reviews to check...
    view full answer...
    Image 1 for Image 2 for
  • Do All Trailer Coupler Latch Repair Kits Fit All Couplers
    There are quite a few A-frame style couplers out there so without more info I really couldn't confidently say if the repair kit part # T4045400 would work for you or not. If you see Dexter or UFP on the coupler and it's a multi fit style coupler with the knob like what this repair kit has it's probably correct though. The most straightforward solution would be a new coupler like the part # CA-5210-B to replace what you have now though as that would eliminate any guesswork and would give...
    view full answer...
  • Coupler Replacement for Rattling Collar Style Coupler on Trailer
    The A-frame Trailer Yoke Coupler part # CA-5210-B is a great option for a coupler replacement. The yoke style of coupler like this is a great option that will fit tight and not rattle or make any noise.
    view full answer...
  • Recommended Trailer Coupler Lock for A-Frame with Trigger Latch
    Do you have a photo of your trailer coupler? If it looks like the A-Frame Coupler part # CA5100B then yes, the Master Lock Heavy-Duty Coupler and Latch Lock Combo part # 3784DAT should work for you as that is what it is primarily designed to fit. I have attached a review video on a straight trailer coupler but it will also work on a-frame trailer couplers as well.
    view full answer...
  • Replacement A-Frame Trailer Coupler For A Big Bubbas Trailer
    The A-Frame Trailer Coupler # CA-5210-B has a wraparound yoke latch that catches to remain open while you position the coupler over the ball. The coupler has a sturdy steel construction that has a black powder coat finish that provides corrosion resistance. It has a weld on installation. The coupler has a weight capacity up to 8,000 pounds. I attached a review video link below.
    view full answer...
  • Tongue Weight Capacity of etrailer.com A-Frame Trailer Coupler
    The etrailer.com coupler, part # CA-5210-B, has a maximum tongue weight capacity of 1,200 pounds. The max towing capacity is 8,000 pounds. That's going to cover the majority of 2 inch hitch balls.
    view full answer...
  • Available A-Frame Trailer Couplers for Trailer with Electric Drum Brakes
    If your trailer uses electric drum brakes then you do not need a brake actuator-type a-frame coupler like # T4067600. Instead you can use a standard a-frame coupler like # CA-5210-B since your brakes' power will come from the signal carried on the 7-way trailer wiring harness. You will want to choose a coupler that matches or exceeds the trailer's GVWR, its gross vehicle weight rating. The coupler referenced above is rated for 8000-lb trailers but we have lots of similar a-frame couplers...
    view full answer...
  • Will A-Frame Trailer Coupler part # CA-5210-B Replace Atwood Coupler on Trailer
    Yes, the A-Frame Trailer Coupler part # CA-5210-B will replace the Atwood coupler you have and work well. Basically all A-frame couplers like this are made to be universal in the way they install so this coupler would fit and work well.
    view full answer...
  • Width of A-Frame Trailer Coupler CA-5210-B
    The A-Frame Trailer Coupler # CA-5210-B is 9-1/2" wide at its mount and 2" where the trailer frame is attached.
    view full answer...
  • Replacement A-Frame Coupler For 2000 Coleman Fairview Pop-Up Camper
    I recommend Demco A-frame standard coupler that takes a 2" ball part # DM14793-81 because of its eZ-Latch mechanism. The eZ-Latch mechanism makes hooking up easy and disengaging the coupler easy. It's designed with a 2-1/4" diameter jack hole for the jack to fit through. It is also a bolt on design. If you need a more cost effective option, I recommend etrailer.com A-Frame Trailer Coupler part # CA-5210-B which has the same integrated jack hole design but without the eZ-Latch. This coupler...
    view full answer...
  • Best A-Frame Disc Brake Trailer Coupler Actuator
    I do have an option for you but there is not a version of the Titan Zinc-Plated A-Frame Brake Actuator for trailers with disc brakes. The only a-frame trailer coupler we do offer for use with disc brakes is the Demco Hydraulic Brake Actuator w/ Lockout part # DM8105422 so this is what I recommend. In order to use this coupler with a 2-5/16" hitch ball you will also need the Demco Trailer Coupler part # DM15791-97. The Demco coupler will actually be an upgrade over the Titan coupler. It...
    view full answer...
  • Option For Replacing An Atwood 2" Ball Coupler CP02-010
    We do have a potential solution for you. Unfortunately Atwood was bought out and their replacement parts are no longer available, including the repair kit you would need. The best option is to replace that A-frame coupler with a new one that attaches to a 2 inch hitch ball. I recommend replacing your coupler with the A-Frame Trailer Coupler - Yoke Latch # CA-5210-B which is the same style of coupler that you have now.
    view full answer...
  • Replacement Coupler Recommendation for Damaged A-Frame Coupler
    I really wish we had the specific part you circled in the picture you submitted but that's not something we carry. Our best solution would be to replace the A-Frame coupler with something like the A-Frame Coupler part # CA-5210-B that you referenced.
    view full answer...
    Image 1 for
  • Where Do I Look If I Can't Find the VIN on a 1997 Doo Little 20 Foot Trailer?
    Usually brand name trailer manufacturers will indicate the unique vehicle identification number (VIN) on the same plaque that carries their brand name, model number information and the trailer specifications. If you cannot find the VIN on the trailer tongue you can check for plaques on other parts of the trailer. It may even be stamped into the frame. Perhaps you can find some helping hands to assist you in moving the trailer around to check its underside (especially near the axle and...
    view full answer...
    Image 1 for
  • Availability of Latch Repair Kit for Fulton A-Frame Coupler for 2 inch Ball
    Fulton hasn't offered as 2 inch ball compatible A-Frame coupler in some years, so they no longer offer a repair kit. I'm sorry to say, I'd give a pretty good chance that the # CA-5100-RK would be a likely fit, but I couldn't guarantee it'll fit. To be absolutely sure, you might think about replacing the coupler with something like # CA-5210-B.
    view full answer...
    Image 1 for Image 2 for
  • Selecting A-Frame Coupler Repair Kit
    Coupler repair kits are usually brand-specific but sometimes a kit made for one brand of coupler can work on another. Still, it is best to find a brand name and/or part number on the item so that you can order the exact correct kit for it. We have several a-frame couplers that look a lot like the unit you referenced, part # CA-5210-B, that you can see on the linked page. You may be able to confirm which you have by comparing your coupler to the photos. All a-frame coupler repair kits...
    view full answer...
  • Can Yoke-Style Trailer Coupler be Adjusted for Better Connection to Hitch Ball
    I took a look at our yoke-style coupler # CA-5210-B and there doesn't seem to be any type of adjustments that can be made for the coupler to sit more snug on the hitch ball. I would check to make sure that your coupler is cleaned out and free from debris and that you're using the correct hitch ball size for your coupler. For example, there is a 1-7/8" hitch ball and a 2" hitch ball. You wouldn't think that a 1/8" would make that much of a difference but it does.
    view full answer...
  • Recommended Replacement Coupler for Atwood A-Frame 2 Inch Coupler
    To remove the old welded A-frame coupler, you will need to have it cut off. Then you will need to have the new one welded in its place. I recommend the A-Frame Trailer Coupler - Yoke Latch - Black - 2" Ball - Weld On - 8,000 lbs # CA-5210-B for the complete replacement. This is a very sturdy coupler made by Ram who manufactures most OEM travel Trailer Couplers. I've attached a video to assist. Atwood parts are either discontinued or being discontinued because they were bought out by...
    view full answer...
  • Replacement for Atwood Yoke Style A-Frame Coupler For 2 Inch Hitch Ball
    I do have an option for you but Atwood was bought out and their replacement parts are no longer available, including the repair kit you would need. The best option is to replace that A-frame coupler with a new one that attaches to a 2 inch hitch ball. I recommend replacing your coupler with the A-Frame Trailer Coupler - Yoke Latch # CA-5210-B which is the same style of coupler that you have now.
    view full answer...
  • Can a Pole Tongue Trailer Be Converted To A-Frame and Strengthen The Frame?
    Yes, you are able to add additional structure to mount a A-Frame Trailer Coupler # CA-5210-B on a straight tongue trailer. This would make the trailer stronger and less likely to have an issue with the pole tongue sagging from weight.
    view full answer...
  • Are Jack Mount Threads of A-Frame Trailer Coupler # CA-5210-B Fine or Coarse Thread
    The threaded bolt holes on the jack mount of the A-Frame trailer coupler part # CA-5210-B are coarse thread. It's actually pretty interesting that the holes are threaded. Nearly every single jack mount like this is not threaded and is designed for nuts and bolts instead. I still think this would be the preferred method.
    view full answer...
  • How Much Does the A-Frame Trailer Coupler with Yoke Latch Weigh- Part #CA-5210-B
    The A-Frame Trailer Coupler - Yoke Latch - Black - 2" Ball - Weld On - 8,000 lbs # CA-5210-B weighs roughly 8-lbs.
    view full answer...
  • Recommended Replacement Coupler for Atwood 2 Inch Coupler
    Unfortunately, Atwood no longer has the repair kits available. They were bought out and the company that now owns them stopped producing the repair parts you need. I recommend the A-Frame Trailer Coupler - Yoke Latch # CA-5210-B for your replacement which will need to be welded in place just like your current trailer coupler.
    view full answer...


< Previous



Do you have a question about this A-Frame Trailer Coupler?


Info for this part was:

Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Cole B
Installed by:
Cole B
Employee Wilson B
Updated by:
Wilson B
Employee Ronnie R
Updated by:
Ronnie R
Employee Mike S
Updated by:
Mike S
Employee Amanda M
Written by:
Amanda M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.