How to Choose Correct Replacement Hub for 2014 K-Z Sportsmen Classic 13FK Camper
Question:
I have a 2014 KZ 13 FKT camper. I would like to purcahse a spare hub assembly for it. I dont want the brake drum with it. Just need for emergency situations. Which one will fit my camper? Thanks
asked by: Bill M
Expert Reply:
Most smaller campers like what you have use an axle rated for 2,000 lbs. If this is the case with your camper then you should be able to use the Idler Hub Assembly # AKIHUB-545-2-EZ-1K but you will need to confirm what bearings you have and the size of the grease seal that will fit with your spindle as we don't have any info on that.
This idler hub uses # L44643 inner bearings and then a grease seal # 34823 that has an inner diameter of 1.249". If you have something different then go ahead and let me know what you find so that I can help you get the correct replacement hub.
Products Referenced in This Question
Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.249 Inch I.D.
- 1.983 Inch O.D.
- TruRyde
more information >
Replacement Trailer Hub Bearing - L44643
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.000 Inch I.D.
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 10" to 12" - 5 on 4.5 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Most Popular Wheel Bearings
- Q&A: How Much Grease Should I Buy To Pack Wheel Bearings
- Q&A: Diameter of Tube that Replacement Cap for etrailer.com and Ram Trailer Jacks Fits
- Q&A: Replacement Cap Needed for Tongue Jack on a 2011 Gulfstream Gulfbreeze Sport
- Q&A: Replacement Actuator for a TDE Model LP7000
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Trailer Hub for Boat Trailer with 3-1/2 Inch Deep Hub
- Article: Trailer Tire Sizing
- Q&A: How to Measure Width and Bolt Pattern on a Trailer Wheel
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Wiring Diagrams
- Article: How to Measure a Trailer Axle
- Article: My Trailer Hitch Doesn't Fit