Curt Friction Sway Control for Weight Distribution Systems
(310 reviews)
Price: $65.03
In Stock
Curt Friction Sway Control for Weight Distribution Systems
Retail:$93.27
Our Price: $65.03
You Save: 30%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Customers prefer these similar products
33% prefer this
- All Info
- Reviews (310)
- Q & A (0)
- Photos
CURT Accessories and Parts
- Weight Distribution Hitch
- Sway Control Parts
- CURT
Friction-style sway control system uses a telescoping bar with friction pads to fight trailer sway. Adjustable tension lets you set the right amount of resistance for your setup. Attaches to your trailer and weight distribution system or ball mount.
Features:
- Friction-style sway control effectively fights trailer sway after it begins
- Reduces side-to-side movement caused by winds, passing traffic, curving roads, or sudden maneuvers
- Bar unit houses the sway control mechanism
- Interior arm telescopes in and out as your trailer moves
- Friction pads rub against each other to create resistance
- Adjustable tension lets you set the perfect amount of control and resistance
- Tension-adjustment screw easily turns in 1/4" increments to fine-tune tension
- Built-in lever lets you disengage the system to completely release tension
- Trailer-mounted ball lets you connect the bar unit to your trailer frame
- May be mounted to either side of your trailer
- Bolt-on installation with included self-tapping screws
- 1-1/4" Hitch ball mounts on weight distribution system head to provide attachment point for sway control unit
- Included adapter bracket can be welded to system head if there is no ball mount platform
- Easy to remove - simply unclip the bar unit from each attachment ball using the included safety clips
- 1-Year limited warranty
Note: Not for use on trailers with surge brakes. It is recommended that you remove this sway control unit before backing up/reversing and before towing in slippery conditions such as on wet, icy, gravel, or snow-covered roads.
When installing this sway control system, follow the included instructions and measure 24" straight back from the center of the coupler along the frame of the trailer to determine the location of the spacer plate and trailer-mounted attachment ball. To achieve proper alignment, the spacer plate may not be necessary in every application.
One friction-style sway control can be used for trailers with up to 6,000-lb GTW. If your trailer's GTW is between 6,000 lbs and 10,000 lbs, you will need 2 sway-control units, 1 on either side of the trailer. You will also want to use 2 units if your trailer is 26' or longer.
17200 Curt Friction Style Sway Control System
Item # 17200
Installation Details
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Arrived Damaged
Customer Reviews
Curt Friction Sway Control for Weight Distribution Systems - 17200
Average Customer Rating: 4.8 out of 5 stars (310 Customer Reviews)
Friction-style sway control system uses a telescoping bar with friction pads to fight trailer sway. Adjustable tension lets you set the right amount of resistance for your setup. Attaches to your trailer and weight distribution system or ball mount.by: Sam 04/24/2023
Simple effective, well made. These are noisy on turns, similar to most friction sway control devices.
by: William 05/03/2024
I towed my trailer across country using this system and it worked great.
by: Justin03/17/2018
The sway control kit I ordered went on the receiver of my travel trailer easily and fits well. I tested the turn radius to see how sharp of a turn it would make without "hitting" and it performed perfectly. I haven't had the chance to take it on the road yet but don't anticipate any problems.
Justin
3/17/2019
Im so glad I ordered the sway control kit. Ive used it several times when pulling my travel trailer and it has made all the difference.
by: Daniel06/10/2022
I've been running a single sway bar for the last couple years on our 2500 and it was working well.
We recently downsized to an F150 and needed the second sway control. I'm certain it's going to help emencely.
Daniel
6/11/2023
Its been a year. We went from a single to a dual friction control. Weve been out on 6 trips since and it works as it should. I didnt think running dual plates would be so much better but it really was worth the investment.
Mike L.
7/12/2023
@Daniel Glad to hear that! We typically recommend using two frictions sway units on trailers that are longer than 26 feet.
by: William 03/15/2023
Very well made but I have not gotten installed yet
William
3/17/2024
Product works fine no issues
by: Keith07/26/2023
This product made a huge difference in the sway problem I had with my travel trailer. Large trucks and/or cross winds were very scary. I would not recommend towing a large trailer without sway control.
by: Daniel 03/06/2024
Works great.
by: Ken T.01/08/2020
The sway bar works well. The retaining clip sometimes fall out of the tow vehicle end which could be a problem. I use 2 clips at that end.
by: Rick 08/30/2023
Install was simple other than they dont send self tapping screws so you will need to drill holes. Shipping was in a timely manner.
by: Lee T05/18/2020
This is a replacement for one i didn't hook up and left it on the trunk of the trailer and never found it after I got home....lol
This one was a direct replacement for my 06 model and it works great.
As usual etrailer had what I needed and at a good price!
Lee T.
5/19/2021
Happy to report that after using this for a year it still works like new. Im very happy with the product
by: Craig08/25/2023
Package arrived in timely fashion. Parts missing from package. Looked like a returned item due to shipping carton being retaped haphazardly. Waiting for missing parts
by: Kent 11/21/2021
The "anti-sway bar" as I call it works as advertised. I've used this product for several decades on several applications including both the towed, and towing vehicles. It can make the difference in your comfort level on windy days. A note of caution: on some applications you'll need to remove it before backing up or you run the risk of breaking the ball.
by: Lewis 03/04/2023
I like these sway controls. I have several different trailers with significantly different side profiles. These controls allow me to fine tune the sway to the different applications.
Very nice finish and they work well
by: Bryan05/07/2023
Use my Camper primarily for work when I'm out of town so I can have a bit of home away from home. Hills, wind, off-road, this makes a substantial difference in stability and therefore, safety. Highly recommend this.
by: Gary03/14/2023
This product is well made, preforms well and is easy to adjust. The brake pad shows very little ware after 5,000 miles. The paint finish appears to hold up well and is very durable.
by: Tony 04/05/2023
Works just like it is supposed to, like all of the products I have ordered from eTrailer in the past.
by: Cliff02/20/2022
the shipping was fast but the packaging sucked, it was all in one box and the brake controller and wire package was smashed from the 100lb weight distribution kit. I'll return the brake controller if it dose not work.
by: Brian07/16/2018
This is my first time purchasing from etrailer and I have to say the experience couldn't have been better. I purchased this sway bar and other items for my new tow vehicle. After trying to piece together everything I needed for towing on a couple of other websites, and not having much luck, I went to etrailer. I was able to find everything I needed, very detailed product information, easy to navigate website, quick shipping, GREAT communication from customer service, and a price that was equal to or better than the other websites. Hands down a happy etrailer customer!
Brian
7/24/2019
No problem with the sway bar, BUT the Curt ball mount with sway bar mount looks like it has twisted. I only pull a Casita travel trailer 3500lbs behind my half ton pickup and havent put any unusual stress on it. Kind of disappointed...
Rachael H.
8/7/2019
If it has twisted then I would advise discontinuing using it. As called out in the instructions if this sway control bar or any of the components come into contact with the trailer while in a jack knife position it is recommended to remove the sway control bar while backing up.
by: John B07/11/2019
Received my anti-sway bar to add to my weight distribution hitch in less than a week. Fastest service I’ve ever had. Installed it and it works great! I could only go 57 mph before and now can keep up with everyone else on the freeway! etrailer is a great place to get anything trailer related. Have always had great service and will buy from them again. 5 stars
John B.
7/13/2020
Works like a dream! Easy to use and install. I would recommend this to anyone looking for one.
by: Preston06/02/2019
Added this sway bar as a second one for my ToyHauler. With all the weight in the back of the trailer I needed a second. Since this brand was currently on my trailer and also on a second trailer I went with the tried and true. With the second sway bar I can pull my ToyHauler at 80 MPH next to tractor trailers and not get any after sway, it pulls straight. I highly recommend this sway bar, it only took me 30 minutes to install, most of that time was getting the measurements correct.
Preston H.
6/3/2020
I am using this with the sway bar on my weight distribution hitch. Being a toy Hauler most of my weight is in the back, I have no problems towing no sway, no bounce very satisfied
by: Glenn 01/27/2023
Exactly what I needed, for a great price, with clear installation instructions and video
by: Curtis 02/11/2023
Excellent service all the way around! Not my first time with ETrailer either, and everytime has been a very good experience.This package arrived a day earlier than stated. the box was strong, undamaged, and packed vey well.
by: CRH04/22/2022
Good price compared to other similar products. Easy site to use. Have purchased several products from etrailer and every purchase was easy, quick delivery, and exactly what was ordered.
by: Ivan 01/18/2023
Fastest Shipping ever, even during the Christmas Rush. Everything was just as described and came fast and packed very well! Thanks Etrailer
25
310
Show More Reviews
See what our Experts say about this CURT Accessories and Parts
- Availability Of a Trailer Friction Sway System Which Is Made In The USACurrently the Friction Sway Control Bars we carry from Curt # 17200 and Reese # 83660 are manufactured overseas. You would have to go with a weight distribution hitch system like the Equal-i-zer to have a friction system made in the USA with sway control. You will need to order the system based on the tongue weight and total loaded trailer weight. I have included a list of these systems below. 200-600lbs Tongue Weight, Trailer Up to 6,000lbs # EQ37060ET 600-1,000lbs Tongue Weight, Trailer...
view full answer... - Recommendation For Preventing Trailer Sway on a 2019 Audi Q7 Without Weight Distribution HitchThank you for pointing out this error, I was able to verify with the owners manual for your 2019 Audi Q7 you should never use a weight distribution hitch and removed the old question. The best way for you to help reduce/prevent sway is by using a Tuson Asymmetric Sway Control # 335TSC-1000. This will require your trailer to have electric brakes as it uses the brakes independently to prevent sway from occurring. If you have a smaller trailer which does not have electric brakes the Friction...
view full answer... - Will Installation of Curt Friction Sway Control System # 17200 Affect Strength of Trailer TongueTo install the Curt Friction Style Sway Control System, part # 17200, to your trailer will require drilling holes in the trailer frame. Drilling the few holes that are needed in the side of the tongue for installation of the sway control will not weaken the trailer tongue. I am including a link to the instructions on the friction sway control system. I would recommend to check with the trailer manufacturer to determine if the drilling of the holes in the frame will void any warranty.
view full answer... - Can Weight Distribution be Used with a Draw-Tite 75148 on a 2007 MuranoThe Draw-Tite # 75148 is designed for standard towing only and cannot be used with weight distribution, unfortunately. With that being said, if you can find a camper with a lighter tongue weight, you would be fine to tow with a standard ball mount. If you do end up going with a lighter camper, you can add on the Reese Sway-Control Bracket for 2" Ball Mounts # RP26003 and Curt Friction Sway Control # 17200 for a sway control option if needed. If you also experience squatting, I do suggest...
view full answer... - Can 2009 Ford F350 With 9300lb Tow Capacity Safely Pull 8100 lb Travel TrailerTowing capacity, payload and tongue weight are not the same, but are closely related. Towing capacity is pretty self explanatory. It's the maximum trailer weight a vehicle can pull. This can vary according to how the truck is configured and equipped. Payload is the amount of cargo a truck can carry, typically in the bed of the truck. The truck's payload will be reduced by the amount of tongue weight applied by the trailer, as you suspected but the tongue weight won't be deducted from...
view full answer... - Would A Friction Sway Control Kit Be Needed With A Curt MV Weight Distribution Hitch You'll typically have more sway if the weight of the trailer is on the heavier end of your truck's towing capacity, but there are a lot of other factors that can contribute to trailer sway. If you're Ram hasn't had any sway issues so far then you wouldn't be required to add in more friction sway control, but you certainly still can to help prevent a sway event from happening in the future. The Curt Friction Sway Control # 17200 can be mounted to your Curt MV WDH # C17063 very easily since...
view full answer... - Can Weight Distribution or Sway Control Be Used With 2021 Toyota Highlander With Curt Hitch C99FR?Friction sway control like the Curt # 17200 would be a very cost effective option to improve the towing experience if you are experiencing sway when towing your trailer with your 2021 Toyota Highlander that has the Curt Trailer Hitch Receiver # C99FR installed. However this hitch is not rated for weight distribution so you would not be able to go that route. To use the friction sway control with your Highlander you will need the Sway-Control Bracket # RP26003 which will bolt on to your...
view full answer... - How to Pick Out a Curt Weight Distribution System for a 2015 Dodge Ram 1500The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use. Based on what you listed as the...
view full answer... - Why Can't You Back Trailer Up With Curt Friction Sway Control 17200 Hooked Up?The reason you cannot back up with friction sway control like the Curt # 17200 installed on your travel trailer with a single 3500lb axle is when turning sharply the bar will be extended or compressed to far which can cause the mounting bracket on the trailer frame to be damaged, or can bend the bar rendering it unusable. Since you are not installing a weight distribution hitch you will need to install mounting bracket # RP26003 to your ball mount if you have a 2" trailer hitch receiver,...
view full answer... - Weight Distribution Recommendation for a 2003 Ford Crown Victoria and 4k Travel TrailerFirst, you are going to want to make sure that the hitch is rated for use with weight distribution. Not all hitches are. There should be a sticker on the hitch that will indicate its capacity when using weight distribution. You have to do the same for the vehicle by consulting the owners manual. If you need a hitch that is rated for weight distribution you can use # 13707. I have included a link to a video showing a typical installation and a link to the instructions. For weight distribution...
view full answer... - Will Curt Replacement Hook Up Brackets # C17208 Fit a Trailer Frame that is 2 Inches WideYes, the Curt Replacement Hook Up Brackets, # C17208, will fit your trailer frame which measures right at 2 inches. These brackets are designed to fit trailer frames up to 2-3/4 inches wide. Although the Curt brackets, # C17208, will fit on your trailer frame and more than likely work with your Husky round bar weight distribution system, I can not make any guaranties since Curt does not test their products on systems from other manufacturers. As for the Curt Friction Style Sway Control,...
view full answer...
- Question About a ProductHi Emily, Before buying anything you'll want to verify that both the Pilot and the trailer hitch installed on it are rated for use with a weight distribution hitch (WDH). From what I can see Honda does not recommend it because it can shift the weight and put too much stress on the frame if installed incorrectly. If everything checks out you can go with the Fastway e2 Weight Distribution w/ 2-Point Sway Control # FA92-00-0450. This system has a tongue capacity range from 200lbs up to...
view full answer... - Comparison of Sway Control Systems for Use on 9200-lb Travel TrailerWeight distribution hitches with built-in sway control come in two basic flavors, those that react to sway once it begins and those that prevent it from happening in the first place. There are also stand-alone friction sway control systems like the # 17200 from Curt. I tend to recommend the sway-prevention type from Sway Pro since our customers report these do tend to deliver better real-world performance. The rig that prevents sway will save you from those "exciting" moments on the road...
view full answer... - Is the Curt Friction Sway Bar Designed For Use on Both Sides of the TrailerThe Curt Friction Sway Control Bar # 17200 can be used on either side of the trailer; for larger trailers (6k-10k GVWR) you'll install one of the # 17200 on each side of the trailer frame. If you need to install one on the opposite side of the trailer then you'll just flip it over.
view full answer... - How to Properly Set the Tension on the Curt Sway Control Bar # 17200The handle is actually the on/off switch for the unit and the bolt under the handle is the tension adjustment bolt. You will need to turn the On/Off handle clockwise (tighter) until the handle will stay firmly in place parallel with the main body of the sway control. Start out setting the sway control by testing with the adjustment bolt at the factory preset level of friction. You will need to perform a series of road tests with the loaded trailer. If there is not enough sway control adjust...
view full answer...
- Sway Control Bracket for Curt Friction Sway Control Bar # 17200Yes, the Reese Sway-Control Bracket # RP26003 that you referenced will work perfectly with your Curt Friction Sway Control Bar # 17200. This is actually the exact bracket we recommend using with the Curt Bar since Curt does not have one of their own. This will simply mount to your ball mount to provide a bracket for the Sway Control bar without the need for any welding. I have attached a short video review that you can check out as well.
view full answer... - Is it Normal for a Friction Sway Control Unit like Curt 17200 to Be NoisyThe noise you're hearing is pretty typical for a friction sway control like the Curt # 17200 and there's really no getting around it because adding lubrication would cause the sway control to be ineffective.
view full answer... - What are Curt Hitch Balls Made of?I checked with the manufacturer and Curt trailer hitch balls, like item # C36BR you were looking at, are made of steel and then chrome plated. This hitch ball is designed to work with the Curt Friction Sway Control for Weight Distribution Systems item # 17200.
view full answer... - Troubleshooting Curt Friction Sway Control Hard to TightenThe threads of the Curt sway bar part # 17200 might be getting a little rusty. You might spray some WD40 on the threads and that should allow it to tighten and loosen easier.
view full answer... - Sway Control Only for an R-Pod 172 TrailerWhen using a friction style sway bar such as # 17200, as long as you are backing up in a straight line on level ground you can leave it in place. But If turning while backing up or on uneven terrain you would want to disengage the unit to avoid damaging it. So a good rule is just to disconnect it. You will not have to disconnect the trailer and taking it off is quick and easy. Just release the tension then pull the pin on the trailer end bracket holding the bar on. Then pull it off. This...
view full answer... - Can a 2003 Jeep Grand Cherokee Tow a FR R-Pod 180 and Recommended WDHThe towing capacity of a vehicle can vary depending on options such as whether or not it would have come with the factory towing capacity. The towing packing however usually includes more than just a trailer hitch and wiring so even if you add these components you still won't necessarily be rated to tow the amount a model equipped with the factory tow package does. With that in mind, the majority of these rules come down to warranty and what will be covered if things go wrong. I cannot...
view full answer... - Are EaZ Lift Sway Control Friction Balls Compatible with Other Sway BarsYes. The small ball on friction bar sway control systems is a standard sizes among different manufacturers, so you would be able to use the Reese Friction Sway Control Kit by Draw-Tite, Reese and Hidden Hitch # 83660 or Curt Friction Sway Control for Weight Distribution Systems # 17200 to replace your existing EaZ Lift sway bar. I like the Reese one just a bit better because it's a little bit better made, as reflected in the 10 year warranty compared to the 1 year warranty on the Curt.
view full answer... - Replacement Anti-Sway Bars For A Curt Trailer Hitch Hi Karen, If you're looking for replacement spring bars for a Curt weight distribution hitch then I'll just need to know the model of the hitch and the tongue weight capacity in order to pick out the correct springs bars. If you're instead wanting a friction sway control kit then you'll just need part # 17200.
view full answer... - Can Curt Friction Sway Control 17200 be Mounted on Either Side of TrailerYou can mount the # 17200 on either side of your trailer. You will need to loosen the handle and the other bolt below it, pull the inside arm out, flip it over, then reinsert it. You will then need to unscrew the handle on top and the nut. Completely remove them both and the mounting plate. Then rotate the plate 180 degrees and put the handle where the nut was and the nut where the handle was. Then, when you flip the unit over to use on the other side of the trailer, everything will be...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Jacob T
Updated by:
Adele M
Updated by:
Chelsea B
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
Installed by:
Cole B
Test Fit:
Randy B
Test Fit:
Kevin C
Video by:
Jonathan Y
Video by:
Charles A
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Sam
4/25/2024
After about 2000 miles, still working well and noisy