Inflation Kit Recommendation for 2022 Thor Four Winds Motorhome with Dual 16" Wheels

Question

Question:

i have 2022 ford e450 super duty class c thor fourwinds motorhome and i am looking for wheel masters 2 hose inflation kit the tires are Lt 225/75r16 dually which kit would be right for this job wm8005 or wm80092 or something else thank you for your time

asked by: Jay R

0

Expert Reply:

The Wheel Masters Airless 2-Hose Inflation Kit WM80092 you mentioned is designed for 16" wheels while the Wheel Masters 2-Hose Inflation Kit # WM8005 is for 22-1/2" wheels so the 80092 would be my recommendation if it wasn't a discontinued kit.

Because of this I recommend checking out the Wheel Masters 2-Hose Inflation Kit # WM8002 which has the same type of design as the first two kits you were looking at.

I'm also linking our selection of hose inflation kits that work with your 16" wheels for you to filter through if you'd rather have something with a bend at the end for a better filling angle.

expert reply by: Jon G

0

Answer 1

For the inner wheel of your dual rear wheels I recommend the Wheel Masters 2-Hose Inflation Kit - 16" to 19-1/2" Inner Dually #WM8009. These valve extenders are designed to mount into the handholes of your wheels (pictured below)…

view full answer...

Answer 2

Since your wheels have hand holes the style of valve stem extenders you'd want are the Wheel Masters Airless 2-Hose Inflation Kit #WM80092 since this kit is the style that was designed for your wheel style. The kit you mentioned fits a hub…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

We have valve stem extension kits like the part #WM8001-135 which were designed for use with dually wheels like what you have on your 2016 Ford F-350.

view full answer...

Answer 6

There isn't a specific fit for your Chevy 3500 dually, as valve extenders are generally universal. The right one depends on how your wheels are configured, and for one that uses brackets that mount to rear wheels with wheel liners there is the…

view full answer...

Answer 7

In order to use the Roadmaster Nighthawk Tow Bar #RM-676 on your 2021 Chevy Spark LT with manual transmission without ACTIV, I recommend the following parts: - Roadmaster Direct-Connect Base Plate Kit - Removable Arms #RM-523202-5 - Blue Ox Patriot…

view full answer...

Answer 8

The overall length of the hoses that come with the Wheelmaster Inflation kit part #WM8009 is 7 inches.

view full answer...

Answer 9

Yes, we do have replacement vinyl caps for your SMI Air Force One Supplemental Braking System for Motor Homes with Air Brakes #SM99243. For the RV side you will want the Cap part #SM99609 and for the vehicle side you will want the Cap part #SM99608.

view full answer...

Answer 10

The correct steering stabilizer for a 2020 Newmar Canyon Star on Ford F-53 Chassis is the Roadmaster Exact Center Steering Stabilizer part #RM62RR which comes with custom brackets for a no-drill installation. The stabilizer will do a great job of…

view full answer...

Answer 11

For your 2004 Monaco Monarco Class A RV you will need 13" to 15" of extension. The best option is going to be the Wheel Masters 2-Hose Inflation Kit - 22-1/2" Dually - Hub Mount item #WM8005 you were looking at. All of our two tire…

view full answer...

Inflation Kit Recommendation for 2022 Thor Four Winds Motorhome with Dual 16" Wheels

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching