Draw-Tite Front Mount Trailer Hitch Installation - 2020 Ford F-450 Super Duty Video

Sounds like you are looking for a hitch mounted cargo carrier to mount in a front hitch for your truck. The most popular cargo carrier we have is the etrailer #e98874 which will fit a 2 inch hitch and can fold up when not needed. Being able to fold…

The Draw-Tite Front Mount Trailer Hitch Receiver #65076 will fit on your 2020 Ford F-450 Super Duty. I have linked a video below that will show you the installation process on your F-450. In the video the installer refers to it as an intercooler…

We do - for your 2023 Ford F-350 you'll want the TorkLift StableLoad Suspension Upgrade w Quick-Disconnect #TL89CR.

The mounting brackets for the 24x60 etrailer Cargo Carrier for RV Bumper - Steel - Folding - 500 lbs #e99049 are spaced apart 27.5". The carrier is going to sit away from the brackets approximately 1/2" and higher 1-1/2" to…

The Draw-Tite Front Mount Trailer Hitch Receiver #65076 will fit your 2023 Ford F-350 dually. It features a bolt-on installation and has a 2" receiver. The hitch has a 9,000 lb line pull, 500 lb vertical load, and 5,000 lb gross trailer…

I have two options that will allow for you to extend the connection point between your truck and trailer. The best option for you will depending on the gross trailer weight (GTW) and tongue weight (TW) of your trailer. As long as the GTW and TW of…

Send me the pictures you have and I'll see if it's something we can get.

I attached pictures that show how the Curt front hitch #C31078 and the Draw Tite #65076 looks when installed and you can tell that the Draw Tite sits up a bit higher since it comes through relative to the curve in the air dam.

The measurements between the front and rear holes on the Adapter Rails for Curt 5th Wheel Hitch #C88KR are 20 1/2" center on center, and 29" center on center. These holes are spaced for the industry standard 5th wheel mounting holes.

I reached out to Reese (Horizon Global) about this and they said that the #58161 square handle is not compatible and they discontinued the service kit. That being said, my contact told me if you can provide original proof of purchase they will be…

For a clean looking front hitch for your 2017 Ford F-350 Diesel I recommend the EcoHitch part #306-X7904 as it basically blends right in with the front bumper of the truck (see picture) and also because it offers the best ground clearance of all of…

Accordinging to my research, your 2016 Forest River RV Sunseeker 3170DS is on a Ford E450 chassis. Therefore, the correct front mount hitch is the Draw-Tite Front Mount Trailer Hitch Receiver part #65053. This hitch is a direct fit for your RV and…