Is There a Plug-In 7-Way for a 2022 Hyundai Palisade

Question

Question:

Is is my understanding that the Palisade/Telluride is prewired for a 7 pin harness but cannot find one on your site. I called Hyundai and they confirmed it is prewired for a 7 pin but they do not carry the 7 pin. I can buy one from Kia but it expensive. Do you have one available? I am not interested in converting a 4 pin to 7 pin if my vehicle is prewired for a 7 pin.

asked by: Tim D

0

Expert Reply:

Yes, we do offer a plug-in 7-way for a 2022 Hyundai Palisade, the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package part # C68JR which is a plug-in fit.

expert reply by: Conner L

0

Answer 1

Your 2021 Hyundai Palisade has brake controller wiring that runs from the port under the dash back to the plug that the Curt 7-way kit part #C68JR plugs into. That is why this kit that fits your vehicle does not have any wiring that runs from the…

view full answer...

Answer 2

That is correct. A 7-way adapter like the Curt Trailer Connector Adapter #C57672 has a blue wire which connects to a typical brake controller in your vehicle. The brakes on your trailer cannot be used without a brake controller. You need the brake…

view full answer...

Answer 3

What you can do to have a 7-way/4-way combo at the rear of your 2022 Hyundai Palisade is to start with the 7-way kit part #C68JR that you referenced and then instead use the 7-way/4-way socket part #30955 in place of the included 7-way and you'd…

view full answer...

Answer 4

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 5

To install the etrailer Trailer Hitch Receiver #e95ZR on your 2023 Hyundai Palisade you will have to do some trimming. This is going to be needed on the underbody panel which attaches to your frame so it will not be seen. I have linked an…

view full answer...

Answer 6

When installing The etrailer Hitch #e95ZR onto your 2023 Hyundai Palisade, it does require some fascia trimming but it is not too bad. When looking at the instructions box 3 while using a tape measure, marker, and utility knife measure, mark, and…

view full answer...

Answer 7

In order to add a 7-way connection to your 2022 Hyundai Palisade you will need to start with a 4-way wiring harness. I recommend the Curt T-Connector Vehicle Wiring Harness #CU94FR. This wiring harness will plug into the existing port in the rear of…

view full answer...

Answer 8

Most likely what you would need is the part #30717. This has a 4-way on one side of the connector that would get plugged into your Explorer and 7-way connector on the other side for connecting to your trailer. This 7-way is a 7-way blade style…

view full answer...

Answer 9

Yes, the Curt trailer wiring harness part #C68JR has nothin to do with any recalls on Hyundai and Kia trailer wiring.

view full answer...

Answer 10

That part was originally announced to fit the 2023 Santa Fe but has since been changed. The Curt item #C68JR fits the 2023 Santa Cruz. The question you referenced has been updated. I contacted my rep at Curt, to add a 4-way connector to your 2023…

view full answer...

Answer 11

Use the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package, #C68JR to quickly and easily install a 7-way, RV-style trailer connector on your 2022 Hyundai Palisade. This is a plug-n-play install but I do highly recommend, to keep the…

view full answer...

Answer 12

I recommend the Tekonsha Universal 7-Way #22551 as the Curt #C68JR will not fit on your 2023 Kia Telluride. The factory connector the Curt harness plugged into was removed on the 2023 model year as there were issues with fires starting on the…

view full answer...

Is There a Plug-In 7-Way for a 2022 Hyundai Palisade

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching