Swagman Locking Anti-Rattle Threaded Hitch Pin Review S64029 Video

With the Swagman XTC2 TILT Bike Rack #S64671 you are able to load the bikes in either direction. It is recommended to always load the heavier of the 2 bikes first to reduce torsion on the receiver. Typically you will position the handlebars on…

Yes, the Swagman 2 Bike Bag for Trailer Hitch Bike Racks #S24FR that you referenced will fit well covering bikes loaded on a Swagman Dispatch #S44FR. I attached a video for your to check out.

The frame cradles of the Swagman Trailhead part #S63365 are rated at 35 lbs per bike. So while the rest of the rack has a higher weight capacity you would have to make sure that each of your bikes weighs less than 35 lbs.

The Swagman Titan 2-Bike Rack for 1-1/4" and 2" Hitches part #S63400 can use the Locking Anti-Rattle, Threaded Hitch Pin part #S64029.

When the hitch is manufactured, the receiver tube can actually be a tiny bit larger than 1-1/4 by 1-1/4 inches, but still within tolerance. The shank of the bike rack can actually be a tiny bit smaller than 1-1/4 inch by 1-1/4 inch, but still be…

Technically you can use the regular bolt that is not making contact with the threads in your Yakima bike rack. However, you will lose the anti-rattle feature. The rack will be able to move around and could over time damage the hitch receiver. I…

It sounds like you received the Replacement Spine #Y8890278 for your Yakima HoldUp Bike Rack. For this 1-1/4 inch spine, you will want the Replacement Mounting Hardware #Y8880129. This is designed specifically for this model HoldUp rack and will work…

There is definitely a way to lock your Yakima bike rack to your hitch. The Yakima HitchLock #Y07235 is designed to fit both 1 1/4" and 2" hitch pins and will get you all squared away. However, if there are already locks on your bike rack…

The thimble on the Replacement Cable For Swagman Bike Racks and Hitch Locks #S2005 you were looking at has an outside diameter of 1-1/4" and an inside diameter of 9/16" as shown in the included diagram. The Locking Anti-Rattle, Threaded…

I do have a threaded, locking hitch pin for your Thule Vertex bike rack, but the Heininger Threaded Hitch Pin, #HE6033, will not work with the Vertex bike rack because the threaded portion of the Heininger hitch pin is too large to fit in the hitch…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Although using a hitch extender isn't an ideal solution for most people I think one would work well for you. Especially if you use an anti-rattle device like the part #63232 to minimize movement. You shouldn't need a very long extender. The…