Replacement Mounting Hardware for Yakima HoldUp Bike Rack for 1-1/4 Inch Hitch

Question

Question:

I NEED A PIN AFTER YAKIMA SENT A NEW SPINE FOR MY OLD HOLD UP RACK. THEY SENT THE WRONG SIZE, I NEEDED 2inch they sent 11/4. RATHER THAN BOTHER RETURNING SOMETHING THAT HEAVY, AM SELLING IT ON CL. SO NOW I NEED A BOLT TO FIT THIS1 1/4inch HITCH AND ETRAILER LISTS 2 PRODUCTS Y8890176 AND Y8880129. I HAVE A 10 YEAR OLD SOLVER HOLD UP, BUT YAKIMA SENT ME A NEWER SPINE. THX!

asked by: LISA

0

Expert Reply:

It sounds like you received the Replacement Spine # Y8890278 for your Yakima HoldUp Bike Rack. For this 1-1/4 inch spine, you will want the Replacement Mounting Hardware # Y8880129. This is designed specifically for this model HoldUp rack and will work well.

This replacement kit will include the hitch bolt, washer and clip for the Yakima HoldUp bike carrier.

expert reply by: Chris R

0

Answer 1

There is definitely a way to lock your Yakima bike rack to your hitch. The Yakima HitchLock #Y07235 is designed to fit both 1 1/4" and 2" hitch pins and will get you all squared away. However, if there are already locks on your bike rack…

view full answer...

Answer 2

Since the lock number of your hitch lock is only listed on the side of the lock core, and yours is locked and therefore not accessible, the only solution is to replace what you have with a new hitch bolt and lock. For that you'd need part…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 5

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The Tow Defender #RM-4700 you found is really our best option to protect the front of your 2024 Chevrolet Trax. This screen helps to deflect any road debris back down to the ground to keep it traveling under your Trax. This particular cover is…

view full answer...

Answer 8

Just looking at your Tern HSD bike with fenders, I'm going to say no the Saris MHS Bike Rack for 1 Bike #SAR23MR is not going to work. I did some research and it looks like a lot of Tern owner's went with the Hollywood Racks Sport Rider SE…

view full answer...

Answer 9

Good morning Brenda. We do offer a trailer hitch for your 2016 Subaru Forester PZEV. The Draw-Tite #DT82MR is not the correct hitch though. That one is only for a 2010 or 2011 Volkswagen Amarok. Instead I recommend the Curt Class 3 Hitch #C13144…

view full answer...