RockyMounts MonoRail Solo 2 Bike Platform Rack Review Video

For your 2019 Hyundai Santa Fe I recommend the Curt Class III Round Tube Receiver Hitch #C13195. This Class III hitch is confirmed to fit your Santa Fe and it will use existing holes in the vehicle's frame for a no-drill installation. It will…

Either the Kuat Tranfer 1 #KU64FR or the RockyMounts MonoRail Solo 1 #RKY10007 would handle the bikes you describe easily. Both would hold the bikes by the tires, so the fact that the rack won't come into contact with the frame will work well…

The RockyMounts MonoRail #RKY10004 is a solid choice for a bike rack and I'd go with it over the Curt Bike Rack #C89JR (the same as 18088) any day of the week. Curt isn't a huge bike rack manufacturer so I'm not very confident in their…

Both the RockyMounts MonoRail Bike Rack #RKY10004 and the RockyMounts SplitRail LS Bike Rack #RKY11404 would be a great option for your 50lb. E-Mountain bikes. They are going to feature a lot of the same features with a few slight differences. First…

At the rear of a trailer or RV the ride quality is very rough when compared to the ride quality at the rear of a passenger vehicle. Reason being the suspension isn't as sophisticated and there is a longer distance between the rear axle and the…

The Kuat Single Transfer part #KU64FR would slightly obstruct the view of the backup camera of your 2018 Chevy Volt but for the most part you'd be looking over the top of your bike if it was loaded and through the frame and you'd still be…

I agree that while it is up to the consumer and either way is the correct way to do it in the end that when installing the Curt Trailer Hitch Receiver part #C13409 that the heat shield should be re installed. If for no other reason just to add a…

The total width is 56-1/2 inches, and I have added a couple of diagrams for you showing the overall dimensions of the Destination Ebike rack you asked about, which is the following part number: - Hollywood Racks Destination E Bike Rack for 2 Electric…

Yes we do! The replacement flathead screw for use with the Thule Hitch Adapter for Thule Helium Aero 2- and 3-Bike Carriers is part #852-3136-001. It is a separate item and needs to be ordered along with the hitch adapter #TH8523185001.

For a Thule Helium bike rack the correct 2 inch hitch adapter is the part #TH8523185001.

The screw associated with the discontinued 852-3134-001 you mentioned is the part #852-3136-001 which is a M8x30.

I recommend using the M6 Flat Cap Screw #853-5787-02 since that's what Thule has listed as the part needed on their site. The Replacement M5 x 15 mm Bolt #852-3136-001 you referenced is for some of the bike racks Thule makes but according to the…