Yakima StageTwo 2 Bike Rack Review - 2017 Toyota RAV4 Video

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

The Tow Defender #RM-4700 you found is really our best option to protect the front of your 2024 Chevrolet Trax. This screen helps to deflect any road debris back down to the ground to keep it traveling under your Trax. This particular cover is…

Yes, the Curt hitch part #C77ZV is a fit for the 2023 Toyota Crown Hybrid. I attached a link to the install instructions as well as a link to an installer finder in case you wanted to find someone near you to install the hitch.

When you use a Hitch Extender #e88YR with the Curt Trailer Hitch Receiver #C77ZV on your 2024 Toyota Crown it is important to remember the extender reduces the receiver weight capacity by 50%. So rather than being able to hold 350lbs it reduces to…

As long as the flat tow wiring is wired in before the 4-Way #C93ZV and you connect the power for the converter directly to the battery it will work. I have seen several use Magnetic Lights #TL21RK which they will wire in on the main harness to have…

The Saris SuperClamp HD #SAR44VR and SuperClamp EX #SA4025F bike racks aren't compatible with bikes that have fenders because the clamp hooks will damage the fenders. I took a look at our Q&A's and didn't see anything where we said…

I have a solution for you. Here at Etrailer, we strongly discourage using wheel-mounted bike racks like the Kuat NV 2.0 #NV22B for bikes with fenders. Mounting wheels with fenders can cause the fenders to crack or become damaged, especially with the…

The idler head is the head opposite of the head with the motor on your Solera RV awning setup. The part #LC672052 is the correct replacement for that.

On a towing setup you are always limited by the lowest rated component as the overall towing capacity since that is the weakest point. When it comes to trailer tires you always want to have them inflated to their max psi when cold. Not only do you…

For your 2019 Hyundai Santa Fe I recommend the Curt Class III Round Tube Receiver Hitch #C13195. This Class III hitch is confirmed to fit your Santa Fe and it will use existing holes in the vehicle's frame for a no-drill installation. It will…

Yes, it will! The Saris SuperClamp EX 2 #SA4025F is approved for bikes with fenders by Saris. The way this works is that the front ratcheting hook needs to be clamped down on the wheel itself at the end of the front fender and that will prevent sway…

IF you're worried about the Kuat Sherpa #SH22G melting because of the exhaust, I suggest using the Hi-Lo adapter #HL20B. This will extend your rack up/down and out. I really do like the Sherpa and don't think that you'll avoid the…