Optronics LED Trailer Tail Light Review and Installation STL12RB Video

The brown (running light) wires all run to each other as they carry the same circuit. The reason there is two browns on the trailer side is because there are running lights that are on both sides of the trailer. Aside from that all the rest of the…

The SAE number of a trailer light isn't always the best way to pick out a replacement light since that isn't a part number. But most likely you are looking for a #A32RB which measures 4 inch by 2 inch for red and part #A32AB for…

Your 4-pin/5-wire wiring harness is what is called a "wishbone" type which simply means that there are two separate running light wires, one brown and one pink. This allows a separate running light wire for each side of the trailer…

The 1992 Chevy C/K Series 1500 did not come with a port for a brake controller. Instead, you will need to hard wire the brake controller by first installing a 4-Way, #118315, and then installing a 7 and 4 Way Installation Kit, #ETBC7. If the Truck…

I don't believe we have an exact match but we do have pins that you could potentially retro-fit to your trailer such as #F719-182Z104. The benefit of this design is that you can't lose the pins. I have included a link below to this…

If you will be permanently installing the Camco Olympian Wave 3 Catalytic Safety Heater part #CAM57331 then you would need to run a hose from the heater to the propane manifold. I cannot recommend you tap or splice into an existing line. The…

In regards to the Camco Olympian Wave 3 Catalytic Safety Heater for Small RVs part #CAM57331, it must be used in a ventilated area per the manufacturer to prevent the build-up of gasses. That said, its not possible to give specifics on this as…

I reached out to my contact at Camco regarding the Olympian Wave 3 Catalytic Safety Heater #CAM57331 and he said the heater requires at least 4" of clearance on each side and at least 30" of clearance from the front of the unit…

The front of the Buyers Products Trailer Tongue Toolbox part #3371701680 is 18-1/4" wide which you can see in the attached photo.

I went out to the warehouse to measure Camco Olympian Wave 3 Catalytic Safety Heater part #CAM57331 and the unit no longer has the knobs and buttons on the front. The black knob is on the left side of the unit and the red switch is on the left side…

Since the Momentum 5th wheel toy hauler has a GVWR (max weight) rating of 20K the Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter for Recessed Ball #DM8550046 gives you 1,000 lbs of cushion so it will work great for this trailer! The Recon…

The B&W Companion Flatbed Gooseneck-to-5th-Wheel Trailer Hitch Adapter part #BWRVK3050 has rubber pads on the bottom of the base (one in each corner) which you can see from the attached photo so there won't be direct steel to aluminum…