Review of Optronics Reflex Reflector - Trim Ring - A211RXB Video

The main difference between the Fusion LED Trailer Tail Light part #STL211XRFHB and the Fusion LED Trailer Tail Light part #OPT37FR is that the stop/turn signal portion of the former is a red lens with red LEDs and the latter is a white lens with red…

Yes, the Reflex Reflector Flange Cover part #A211RXB that you referenced does fit the GloLight LED trailer tail light part #STL1211RCFHPG that you also mentioned.

I don't have any available database that would allow me to find what taillights your boat trailer was originally equipped with. Unfortunately, trailer manufacturers don't make that information easy to obtain or disseminate like automotive…

I checked with Wesbar and the lens only for the LED version of the tail lights you have is not available as a separate part but you can replace the light with #271595 for the left side of the trailer and #271594 for the right side.

The older generations of the Wesbar submersible low-profile lights came with sealed light bulb capsules that are not replaceable like what you have in the picture you uploaded. Your best option is to replace the lights with new lights like part…

The brake output wire of the jacketed 7-way wiring part #DW04914-1 that you referenced does come with a heavy enough gauge of wire for your brake circuit. The 12 gauge brake output circuit would work well.

That is a valid question. We strongly recommend people use 10 gauge wire like the part #10-1-1 (sold by the foot), but we realize that there are a lot of people who get by with 12 gauge wire. There are several variables with trailer brake wiring that…

The brake wires can be spliced together and have one wire run to the junction box if that is easiest for you. On a single axle you could also have separate brake wires for both sides if you wanted to but most of the time there is a single wire out to…

The Fusion LED Trailer Tail Light #STL211XRFHB is for a single light. To operate the reverse light you will need a 5-wire or 7-wire trailer connection.

Do you mean it has two white wires in addition to the power wires for the turn/brake and running lamp circuit? If so you can simply attach the ground wire for the #STL211XRFHB lamp to both white ground wires on the trailer. This assumes they're…

The Fusion LED Trailer Tail Light #STL211XRFHB that you referenced is sold individually. If you needed a pair you'd need to order a quantity of two.

The Optronics 7-Pole Blade to 5-Pole Flat Connector Wired Trailer Adapter - Coiled Cable - 94-1/2" Long #A57CCB will work with your trailer wiring. The 5-way on your trailer will have the reverse light power that will on the trailer connection…