LaSalle Bristol XTRM Universal Self-Leveling Sealant Review 34427034145-1 Video

The rule of thumb here in most cases is, the smoother the surface and glossier the paint, the shorter the nap. With the roof of the trailer being fairly smooth a 3/4" or less nap would be the better option. The manufacturer recommends a…

You would need to reach out to Alfa to see what type of roof membrane they used on the trailer since there isn't a guide that would tell us what was used. Typically the roof membrane is either made of EPDM or TPO. The only roof coating we…

Although I would not be able to speak on the installation of the part(s) you received for your trailer, I can tell you that the TremPro 644 Silicone Sealant part #0160297 will do an excellent job of sealing your new aluminum panel to the trailer and…

I spoke with LaSalle Bristol and they informed me that the LaSalle Bristol XTRM Universal Self-Leveling Sealant part #34427034145-1 has a dry time of around 1 hour.

It doesn't look like we currently offer the correct lens replacements based on the dimensions you provided and the tail light you have looks like the base would be too broken and would allow water in to replace just the lens so you're looking…

I recommend the Alpha Systems Butyl Tape for RV Weatherproofing #AL28FJ as it's 1" wide to fully cover the flange of your vent. Make sure you overlap the ends to form a tight waterproof seal. You can see me doing this at 2:50 mark in the…

Yes, you can install the B&W Turnoverball Underbed Gooseneck Trailer Hitch #BWGNRK1020 with the BedRug Custom Truck Bed Mat #BR44FR on your 2022 GMC Sierra 2500 with the 6-3/4' bed. You will need to make cutouts in the BedRug though for…

The MaxxFan Roof Vent with 12V Fan #MA00A04301K will fits roofs that are 2" - 6-1/2" thick, and in order to install it in your tear camper's 2" roof you are correct that you do need to cut the insert - interior Garnish Trim Ring -…

All of the RV roof vent covers on the market are designed a bit shorter than need for the vent lid to fully open due to height requirements. That being said, manufacturers have stated that as long as the vent lid opens 50% then the it will still be…

Yes, the Furrion power cord part #C-FOS07TAPK-006 that you referenced does fit the 5 inch monitor version of the Furrion Vision S part #FOS05TASF.

The Go Power Overlander Expansion Kit - 190 Watt Solar Panel #34282182 connects to a Go Power solar system via MC4 connectors. The kit comes with those connectors but if you need to add extensions you can do so with whatever length you might need: -…

Since you're adding more you'll want to wait for it fully cure and then wipe it down to ensure the surface is clean for the new sealant #AL98KV you'll be laying down to properly bond to the surface.