Availability of 7-Way to 12 Volt Power Socket Adapter for Cooler

Question

Question:

I want to connect my 12v cooler to my 7 pin trailer plug

asked by: Brian P

1

Helpful Expert Reply:

I am not totally sure what power connections your cooler has but we do have a 7-way to 12 volt power outlet adapter with the part # PK11896 that you could use as this plugs into a 7-way that has an active 12 volt power circuit and provides an outlet for 12 volt power. This provides the type of outlet that some refer to as a cigarette lighter port.

expert reply by: Jameson C

1

Answer 1

The back of the Pollak 7-Way to 12 Volt Power Outlet Adapter, #PK11896, does accept the type of input that you would plug into a power port/cigarette lighter outlet. You will need to make sure that the 12 volt pin, located in the 1 oclock position…

view full answer...

Answer 2

The back of the Pollak 7-Way to 12 Volt Power Outlet Adapter, #PK11896, does accept the type of input that you would plug into a power port/cigarette lighter outlet. You will need to make sure that the 12-volt pin, located in the 1 o'clock…

view full answer...

Answer 3

The only adapter we will have with a 12-volt connector for your cooler is the Hopkins Multi-Tow Trailer Connector Adapter #HM47675 that connects to a 7-way connector. There is not a connector that connects to a 4-way since the 4-way is powered by the…

view full answer...

Answer 4

The best option I have to install a 12 volt power outlet in a truck bed would be to use the Hopkins 12-Volt Power Socket with Power Wire and Fuse Assembly part #HM55115 and wire this directly to the battery. This would need to be wired directly to…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Availability of 7-Way to 12 Volt Power Socket Adapter for Cooler

Product Page this Question was Asked From

Continue Researching