Hopkins Endurance Multi-Tow Trailer Connector Adapter Review Video

First let's start with a trailer hitch for your 2016 Honda Pilot for that you would want the etrailer part #e98840 which has a capacity of 6,000 lb capacity. For trailer wiring you would then want the Tow Ready part #118286 if the vehicle does…

I spoke to my contact at Derale and although they have not had a chance to physically test their transmission coolers on the 9 speed transmission in your 2016 Honda Pilot yet, I do believe we have an option for you that will allow you to install the…

The best way to confirm whether a given vehicle has a factory tow package present is to check with a local dealership using your vehicle's VIN number. The dealer should be able to easily look this up. Also, please note that what physical…

For your 2018 Honda CR-V I recommend the etrailer.com Trailer Hitch Receiver #E98848 because it features a sleek hidden design where only the receiver is actually visible behind the vehicle. Its matte black finish also adds a unique rugged appearance…

WeatherTech does have mudflaps that fit your 2023 Chevy Suburban RST with the part #WT73XJ which is a front and back set. This set fits the versions of your vehicle that do not have the power assist retractable steps whereas the part #WT32TJ is for…

Nope, the Curt TriFlex NEXT #C24VV will not have to set up and be recalibrated when the vehicle is turned off, it will keep the settings you use.

For your adapter from the 4-way to a 7-way, I recommend the Hopkins Adapter 4-Pole to 7-Pole and 4-Pole #37185. This will give you the option of adding the 12V power, the brake controller output, and the reverse lights. Even if you don't add…

If your truck has a 7-way connector then you already have a pin for the reverse lights, but it might not currently be hooked up since a lot of people rarely use it and will typically just cap it off. The reverse light function on a typical 7-way is…

For as many units of the #288-06603 as we've sold, not one customer has reported any sort of damage to their vehicle door's weatherstripping. So, it's safe to say that unless you plan on leaving the cover on for months and months at a…

For a light kit that is designed to fit etrailer cargo carrier #e98874 check out the part #e98943-44LED. This has everything that you need including the mounting brackets. This could pretty easily be installed to the railings of the #e98874 that you…

Here is an image I have from the Xtreme Off-Road Swing-Up Trailer Jack #ORJW750D in zinc which will have the same dimensions as the black Jack #ORJW750BD you are looking at.

I wasn't able to obtain this information from the manufacturer so I went out to our warehouse and measured the Ark Locking Jerry Can Holder with Siphon Guard part #JCHF20D for you. The height of the mounting bracket is 10-3/4" which you can…