Ram Gooseneck Coupler Review Video

Actually all you really have to do is remove the oil from the hub and then pack the hubs with grease and then get the correct bearing buddy to match the threaded hub bore. You will need to measure the inner diameter of where the old grease cap…

I do have an option for you but we don't offer any inner tube square gooseneck couplers which measure 3-1/2" x 3-1/2" as this is not a standard size. That said, what you can do is install a new outer tube and inner tube of the standard…

The 235/80-16 sizes tires are the closest size that we have to your 9.5-16.5 tires. Your current tires should have a diameter of 30.6" and the 235/80-16 tires measure 30.9" in diameter. When it comes to clearance with your trailer you will…

In regards to the Ram Gooseneck Coupler part #GCSQ-25008, the main things you need to know are the size and weight capacity. The outer tube which gets welded to the tongue of the trailer is 4-1/2" x 4-1/2". The inner tube which is what…

If the coupler will not adjust be sure that the set screw (shown in the linked photo) has been loosened to allow the coupler to move. If the set screw has been loosened and the unit will not adjust try applying a product like PB Blaster or WD40 to…

The only difference between 7-Way Utility and 7-Way RV is the color of the wires. The pin outs are the exact same so either would work just fine with the other. If you check out the picture I attached you'll see that the functions are all the…

We do have weld-on gooseneck trailer couplers that are 4-1/2 inches square, they are complete couplers as I'm not 100 percent certain what you are referring to by changing the coupler at the base, unless you mean welding it on. For a weld-on…

A gooseneck trailer, or in this case a converted 5th wheel trailer using Ranch Hitch, #AM3139, will still need safety chains as if required by law in the states you will be traveling. You will need to check with the Department of Transportation for…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

We have hitch balls that fit the factory rail kit of your 2019 Ford F-250 like the part #C60692 but we do not have any balls that fit your rail kit that have an offset like the #C602 that you referenced.

Since you have the prep package, a separate gooseneck hitch is not needed for your 2020 Ram 3500. Instead, all you need is a gooseneck hitch ball that is designed to fit in the gooseneck hole on your truck, and the best option is also from B&W: -…

The Gooseneck Coupler Head Kit, #GC-HEAD, was designed for use with GCPN Series, GCSQ Series, and GCSQTW Series couplers which range in capacity from 25,000 to 30,000 pounds. So the maximum would be 30,000 pounds.