etrailer Hitch Cargo Carrier Review - 2016 Nissan Rogue Video

The Valterra Eccentric Tank Reducer, part #T1041-1, is installed with cement. When you reinstall the new one use #A05-0303. The cement is permanent so you're not going to be able to break it up. Instead you need to cut the pipes after removing…

In most cases the Valterra Eccentric Tank Reducer - RV Gray Water - 3" Spigot to 1-1/2" Hub #T1041-1 is going to be attached to the gray water tank with an ABS solvent like #A05-0303, so it will need to be cut off in order to replace it.

I spoke to Yakima about the StraightShot #Y69VR extender, but they have only tested this with Yakima accessories. Due to this, it doesn't have a listed tongue weight. With that being said, the Yakima bike racks and other accessories are going to…

If your camper is up to 8 feet long I recommend going with the Brophy tie downs you referenced #TDSF. These tie downs fit in the stake pockets of the truck bed with the hook end pointed out of the bed. I have included a link to the installation…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The B&W Patriot slider fifth wheel hitch #BWRVK3270 that you referenced weighs a total of 220 lbs. While that is a lot of weight what's great about the B and W hitches is that they break down into smaller sections easily to help distribute…

While we carry some very solid products when it comes to skid wheels, such as the Ultra-Fab Hitch Mounted, #UF48-979017 that you linked to and the even stronger Ultra-Fab Skid Wheels for Class A RVs 34' and Longer, #UF48-979013; these are not…

As shown in the linked photo that I have prepared for you the bracket dimensions on the Ultra-Fab Hitch Mounted Steel Rollers #UF48-979017 are 4-inches x 5-3/8-inches. The height from the bottom of the roller wheel to the top of the mounting flange…

The safety chain holes are well hidden on Curt trailer hitch #C13180. There is a part of the hitch above the receiver that attaches to the vehicle bumper. The holes are in that plate. I have included a picture pointing them out.

I cannot find any reference to the part numbers you provided online. The Curt #C13180 Class III receiver hitch is a confirmed fit for the 2000-2006 Toyota Tundra. If you're needing the bolt hole spacing of the #C13180 that you'd looked at,…

The Demco Spare Tire Carrier for up to 4" Trailer Tongue part #DM15851-52 doesn't have a weight capacity and it's not common for spare tire carriers to have this either. The bolt pattern compatibility will help limit overloading. For…

For your 2021 Subaru Forester I recommend the etrailer Trailer Hitch Receiver #e83ZR. This custom-fit Class III hitch will be perfect for your towing needs. It has a matte black powder coat finish which will help hide any dirt or dings while…