Demco 5th Wheel Lifting Bracket Review Video

No, they can not! The B&W Universal Base Rails item #BWRVR3200 and any other comparable set of rails will not be compatible with a preinstalled gooseneck hitch. I do have quite a few options to potentially add some 5th wheel rails using an…

Hey Rodney, thanks for reaching out! The Correct Track kits for Single #LC87120, Tandem #RR23QX, and Triple #RR55QX axle trailers are a solid choice to add up to 2" of lift to any standard axle setup. If that's what you have on your…

Yes, the B&W Companion 5th Wheel Trailer Hitch w/ Slider #BWRVK3400-5W has a fully articulating head that can move side-to-side and front-to-back to help reduce chucking and bouncing from uneven terrain.

The Demco Hijacker Autoslide #DM8550034 has a weight of 273 lbs. I've added a couple links to video reviews of this hitch for you to take a look at.

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

The Demco Autoslide 5th Wheel Hitch w/ Slider #DM79GV comes with everything needed to install in the OEM pucks of your 2020 Chevy Silverado 2500. You wouldn't need anything else to use this hitch and be ready to tow.

According to the information you listed your maximum tongue weight for a 5th wheel is going to be 2,775lbs which is the same amount as the gooseneck tongue weight. Do understand this can vary slightly depending on how your vehicle is loaded and any…

Since you have a short bed 2022 Ram 3500 with an OEM puck system there's no need to second guess getting a Sidewinder at all. Demco's Autoslide 5th Wheel Hitch #DM89GV is nice and makes life a lot easier since it automatically turns and rolls…

Correct, there is not a sliding 5th wheel hitch for the '24 Silverado 2500 from Curt that fits directly in the puck system; I checked directly with Curt as well and they do not have a fit. There are two options that do fit the puck system and are…

The B&W Custom Underbed Installation Kit #BWGNRK1111-5W that fits your 2012 Ford F-250 Crew Cab Short Box installs on the outside surfaces of your frame rails. Any suspension kit that also installs on the outside of the frame will not work, but…

Thanks for the pictures! The plate you are needing to get behind is for your gooseneck ball in bed hitch. You will have to remove that to reach the bolt. This will allow you to install the Firestone item #F2703 air bags on your 2012 Ford F-250. I…

Look in the bed of your 2012 Ford F-250. Do you see 4 holes cut in the bed around the center of it? If so then you have the factory rail kit. If not then you do not have it. If you do not have it then you would want the part #BWGNRK1111-5W for the…