Customers compare DE37SR to these similar products
Products Featured in this Video
Hey everyone, Ryan here at etrailer. Today we're gonna be checking out the tandem axle brake line kit, which is gonna be made by DeeMaxx. Now for those of you that are doing a break upgrade or even maintenance for that matter, like today for example, we converted our camper here to hydraulic disc brakes that used to have electric drum brakes on it. And we used this DeeMaxx kit. This is… see more >
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…
view full answer...The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.
view full answer...You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…
view full answer...Hey Mark, since we know your Brinkley Z3100 has the Rhino style pin box, the correct Gen-Y fifth wheel to gooseneck adapter is the part #GY98GR which comes with the auto latch you mentioned wanting as well!
view full answer...Thanks for providing that information it really makes this simple. To find the right Gen-Y we need to calculate your tongue weight using the formula GVWR x 0.22 = TW. The Z2900 has a GVWR of 14,495 lbs so the TW is 3,189 lbs. Based on this…
view full answer...You can replace the Lippert Rhino pin box on your Brinkley 5th wheel. The right one though is going to depend on the pin weight of your trailer. Here are the options that will work to replace the Lippert Rhino: - Pin Weight of 1,500 lbs - 3,500…
view full answer...Hey Dennis, the best tire chain we have for your 2024 Chevy 2500 with a tire size of 275/65-20 is the pewag tire chains part #PWE3231S which was designed for deep snow and mud like you mentioned. I attached an install video for these chains for you…
view full answer...The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…
view full answer...Hi Eric; there won't be any fitment issues with the B&W Rails #BWRVK2505 and the Demco Autoslide #DM8550034 in your 2024 Silverado 2500. This Autoslide comes with the side plates designed for industry standard rails like the B&W…
view full answer...Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…
view full answer...While the Sliding B&W Patriot 5th Wheel Trailer Hitch #BWRVK3270 will not fit on the Demco 5th Wheel Rail Adapter #DM6333 I would recommend going with the B&W Companion OEM 5th Wheel Hitch #BWRVK3775. This will fit into the factory puck…
view full answer...The B&W Companion OEM 5th-Wheel Hitch for Ford Super Duty Prep Package - Dual Jaw - 20,000 lbs #BWRVK3300 is a confirmed fit for your 2017 Ford F-350 with factory rail kit for 5th wheel. This hitch weighs just under 150 lbs. It does come in…
view full answer...